Proliferation and Differentiation of Human Osteoblasts within 3D printed Poly-Lactic-co-Glycolic Acid Scaffolds

Abstract

Bone repair and regeneration can be enhanced through implantation of biocompatible and biodegradable scaffolds, which serve primarily as osteoconductive moieties. In this study, the mechanical properties and microenviroment of 3D printed poly-lactic-co-glycolic acid (PLGA) scaffolds are examined. Additionally, the proliferation and differentiation of human fetal osteoblasts are evaluated after 3 weeks of in vitro culture on the scaffolds. The results showed that the PLGA scaffolds examined had mechanical properties similar to that of trabecular bone, but was still much weaker compared to cortical bone. In addition to general porosity, the PLGA scaffolds also had micropores within macropore walls. Cultured human osteoblasts could proliferate upon seeding on the PLGA scaffolds. Alkaline phosphatase activity and osteonectin expression of the osteoblasts cultured on the PLGA scaffolds remained stable over three weeks, whilst expression of collagen type I and osteopontin decreased. The alkaline phosphatase activity of osteoblasts cultured on PLGA scaffolds is comparable with that from two commercially-available scaffolds — OPLA and collagen scaffolds (Becton—Dickinson (BD) Inc., Franklin Lakes, NJ, USA). Hence, the results suggested that the PLGA scaffolds examined are conducive for promoting osteogenesis.

Keywords

Osteoblast scaffold 3D printing osteogenesis.

Get full access to this article

View all access options for this article.

References

Groeneveld, E.H. , van den Bergh , J.P. , Holzmann, P. , ten Bruggenkate , C.M. , Tuinzing, D.B. and Burger, E.H. (1999). Mineralization Processes in Demineralized Bone Matrix Grafts in Human Maxillary Sinus Floor Elevations, J. Biomed. Mater. Res., 48(4): 393-402.

Cao, T. , Ho, K.H. and Teoh, S.H. (2003). Scaffold Design and in vitro Study of Osteochondral Coculture in a Three-dimensional Porous Polycaprolactone Scaffold Fabricated by Fused Deposition Modeling, Tissue Eng., 9(Suppl 1): S103-112.

Tsuruga, E. , Takita, H. , Itoh, H. , Wakisaka, Y. and Kuboki, Y. (1997). Pore Size of Porous Hydroxyapatite as the Cell-substratum Controls BMP-induced Osteogenesis, J. Biochem. (Tokyo) , 121(2): 317-324.

Habibovic, P. , Yuan, H. , van der Valk, C.M. , Meijer, G. , van Blitterswijk , C.A. and de Groot, K. (2005). 3D Microenvironment as Essential Element for Osteoinduction by Biomaterials , Biomaterials, 26(17): 3565-3575.

Lee, Y.K. , Song, J. , Lee , S.B. , Kim , K.M. , Choi, S.H. , Kim , C.K. , LeGeros, R.Z. and Kim , K.N. (2004). Proliferation, Differentiation, and Calcification of Preosteoblast-like MC3T3-E1 Cells Cultured onto Noncrystalline Calcium Phosphate Glass, J. Biomed. Mater. Res. A, 69(1): 188-195.

Woodfield, T.B. , Van Blitterswijk , C.A. , De Wijn, J. , Sims, T.J. , Hollander, A.P. and Riesle, J. (2005). Polymer Scaffolds Fabricated with Pore-size Gradients as a Model for Studying the Zonal Organization within Tissue-engineered Cartilage Constructs , Tissue Eng., 11(9-10): 1297-1311.

Meyvis, T. , De Smedt, S. , Stubbe, B. , Hennink, W. and Demeester, J. (2001). On the Release of Proteins from Degrading Dextran Methacrylate Hydrogels and the Correlation with the Rheologic Properties of the Hydrogels, Pharm Res., 18(11): 1593-1599.

Ferreira, L. , Figueiredo, M.M. , Gil , M.H. and Ramos, M.A. (2006). Structural analysis of Dextran-based Hydrogels Obtained Chemoenzymatically , J. Biomed. Mater. Res. B Appl. Biomater., 77(1): 55-64.

Karageorgiou, V. and Kaplan, D. (2005). Porosity of 3D Biomaterial Scaffolds and Osteogenesis, Biomaterials, 26(27): 5474-5491.

10.

Hollister, S.J. (2005). Porous Scaffold Design for Tissue Engineering, Nat. Mater., 4(7): 518-524.

11.

Hutmacher, D.W. , Sittinger, M. and Risbud, M.V. (2004). Scaffold-based Tissue Engineering: Rationale for Computer-aided Design and Solid Free-form Fabrication Systems, Trends. Biotechnol., 22(7): 354-362.

12.

Seitz, H. , Rieder, W. , Irsen, S. , Leukers, B. and Tille, C. (2005). Three-dimensional Printing of Porous Ceramic Scaffolds for Bone Tissue Engineering, J. Biomed. Mater. Res. B Appl. Biomater., 74(2): 782-788.

13.

Dutta Roy, T. , Simon, J.L. , Ricci , J.L. , Rekow, E.D. , Thompson, V.P. and Parsons, J.R. (2003). Performance of Hydroxyapatite Bone Repair Scaffolds Created via Three-dimensional Fabrication Techniques , J. Biomed. Mater. Res. A, 67(4): 1228-1237.

14.

Liu, X. and Ma, P.X. (2004). Polymeric Scaffolds for Bone Tissue Engineering , Ann. Biomed. Eng., 32(3): 477-486.

15.

Simon, J.L. , Roy, T.D. , Parsons, J.R. , Rekow, E.D. , Thompson, V.P. , Kemnitzer, J. and Ricci, J.L. (2003). Engineered Cellular Response to Scaffold Architecture in a Rabbit Trephine Defect, J. Biomed. Mater. Res. A, 66(2): 275-282.

16.

Roy, T.D. , Simon, J.L. , Ricci , J.L. , Rekow, E.D. , Thompson, V.P. and Parsons, J.R. (2003). Performance of Degradable Composite Bone Repair Products Made Via Three-dimensional Fabrication Techniques , J. Biomed. Mater. Res. A, 66(2): 283-291.

17.

Donahue, H. , Siedlechi, C. and Vogler, E. (2004). Cell Biology of the Skeletal System. In: Hollinger, J. , Einhorn, T. , Oll, R. and Sfeir, C. (eds), Bone Tissue Engineering , CRC Press, New York, pp. 43-50.

18.

Ge, Z. , Baguenard, S. , Lim, L.Y. , Wee, A. and Khor, E. (2004). Hydroxyapatite-chitin Materials as Potential Tissue Engineered bone Substitutes, Biomaterials, 25(6): 1049-1058.

19.

Grieb, T.A. , Forng, R.Y. , Stafford , R.E. , Lin , J. , Almeida, J. , Bogdansky, S. , Ronholdt, C. , Drohan, W.N. and Burgess, W.H. (2005). Effective use of Optimized, High-dose (50 kGy) Gamma Irradiation for Pathogen Inactivation of Human Bone Allografts, Biomaterials, 26(14): 2033-2042.

20.

Reilly, D.T. and Burstein, A.H. (1975). The Elastic and Ultimate Properties of Compact Bone Tissue, J. Biomech. , 8(6): 393-405.

21.

Williams, J.M. , Adewunmi, A. , Schek , R.M. , Flanagan, C.L. , Krebsbach, P.H. , Feinberg, S.E. , Hollister, S.J. and Das , S. (2005). Bone Tissue Engineering using Polycaprolactone Scaffolds Fabricated Via Selective Laser Sintering , Biomaterials, 26(23): 4817-4827.

22.

Deschamps, A.A. , Claase, M.B. , Sleijster , W.J. , de Bruijn, J.D. , Grijpma, D.W. and Feijen, J. (2002). Design of Segmented Poly(ether ester) Materials and Structures for the Tissue Engineering of Bone, J. Control Release, 78(1-3): 175-186.

23.

Hile, D.D. , Kirker-Head, C. , Doherty, S.A. , Kowaleski, M.P. , McCool, J. , Wise, D.L. and Trantolo, D.J. (2003). Mechanical Evaluation of a Porous Bone Graft Substitute Based on Poly(propylene glycol-co-fumaric acid), J. Biomed. Mater. Res. B Appl. Biomater., 66(1): 311-317.

24.

Kalia, P. , Blunn, G.W. , Miller, J. , Bhalla, A. , Wiseman, M. and Coathup, M.J. (2006). Do Autologous Mesenchymal Stem Cells Augment Bone Growth and Contact to Massive Bone Tumor Implants? Tissue Eng., 12(6): 1617-1626.

25.

Ge, Z. , Goh, J.C. and Lee, E.H. (2005). The Effects of Bone Marrow-derived Mesenchymal Stem Cells and Fascia Wrap Application to Anterior Cruciate Ligament Tissue Engineering, Cell Transplant, 14(10): 763-773.

26.

Wilson, C.J. , Clegg, R.E. , Leavesley, D.I. and Pearcy, M.J. (2005). Mediation of Biomaterial-cell interactions by Adsorbed Proteins: A Review, Tissue Eng., 11(1-2): 1-18.

27.

Rumpler, M. , Woesz, A. , Varga, F. , Manjubala, I. , Klaushofer, K. and Fratzl, P. (2007). Three-dimensional Growth Behavior of Osteoblasts on Biomimetic Hydroxylapatite Scaffolds, J. Biomed. Mater. Res. A, 81(1): 40-50.

28.

Duplomb, L. , Dagouassat, M. , Jourdon, P. and Heymann, D. (2007). Concise Review: Embryonic Stem Cells: A New Tool to Study Osteoblast and Osteoclast Differentiation, Stem Cells , 25(3): 544-552.