A rapid and continuous hydrothermal route for the synthesis of nano-sized hydroxyapatite rods co-precipitated with calcium-doped zirconia nanoparticles using a superheated water flow at 450°C and 24.1 MPa as a crystallizing medium is described. Hydroxyapatite and calcium-doped zirconia phases in the powder mixtures could be clearly identified based on particle size and morphology under transmission electron microscopy. Retention of a nanostructure after sintering is crucial to load-bearing applications of hydroxyapatite-based ceramics. Therefore, rapid consolidation of the co-precipitates was investigated using a spark plasma sintering furnace under a range of processing conditions. Samples nominally containing 5 and 10 wt% calcium-doped zirconia and hydroxyapatite made with Ca:P solution molar ratio 2.5 showed excellent thermal stability (investigated using in situ variable temperature X-ray diffraction) and were sintered via spark plasma sintering to >96% sintered densities at 1000°C resulting in hydroxyapatite and calcium-doped zirconia as the only two phases. Mechanical tests of spark plasma sintering sintered samples (containing 10 wt% calcium-doped zirconia) revealed a three-pt flexural strength of 107.7 MPa and Weibull modulus of 9.9. The complementary nature of the spark plasma sintering technique and continuous hydrothermal flow synthesis (which results in retention of a nanostructure even after sintering at elevated temperatures) was hence showcased.
HenchLL. Biomaterials: a forecast for the future. Biomaterials1998; 19: 1419–1419.
2.
HenchLL. Bioceramics. J Am Ceram Soc1998; 81: 1705–1705.
3.
HenchLL. The challenge of orthopaedic materials. Curr Orthopaed2000; 14: 7–7.
4.
KattiKS. Biomaterials in total joint replacement. Colloids Surf B2004; 39: 133–133.
5.
CariaPHFKawachiEYBertranCA. Biological assessment of porous-implant hydroxyapatite combined with periosteal grafting in maxillary defects. J Oral Maxillofacial Surg2007; 65: 847–847.
6.
StorckCBrockmannMSchnellmannE. Functional outcome of vocal fold medialization thyroplasty with a hydroxyapatite implant. Laryngoscope2007; 117: 1118–1118.
7.
HeimannRBVuTA. Effect of CaO on thermal decomposition during sintering of composite hydroxyapatite-zirconia mixtures for monolithic bioceramic implants. J Mater Sci Lett1997; 16: 437–437.
8.
RoederRKSproulMMTurnerCH. Hydroxyapatite whiskers provide improved mechanical properties in reinforced polymer composites. J Biomed Mater Res2003; 67A: 801–801.
9.
WhiteAABestSMKinlochIA. Hydroxyapatite-carbon nanotube composites for biomedical applications: A review. Int J Appl Ceram Technol2007; 4: 1–1.
10.
OktarFNMeydanogluOGollerG. Sintering effects on mechanical properties of hydroxyapatite-titanium dioxide (HA-TiO2) composites, 2006.
11.
KongYMBaeCJLeeSH. Improvement in biocompatibility of ZrO2-Al2O3 nano-composite by addition of HA. Biomaterials2005; 26: 509–509.
12.
KimHWKohYHSeoSB. Properties of fluoridated hydroxyapatite-alumina biological composites densified with addition of CaF2. Mater Sci Eng C2003; 23: 515–515.
13.
ViswanathBRavishankarN. Interfacial reactions in hydroxyapatite/alumina nanocomposites. Scr Mater2006; 55: 863–863.
14.
AhnESGleasonNJYingJY. The effect of zirconia reinforcing agents on the microstructure and mechanical properties of hydroxyapatite-based nanocomposites. J Am Ceram Soc2005; 88: 3374–3374.
15.
BalamuruganABalossierGKannanS. Electrochemical and structural characterisation of zirconia reinforced hydroxyapatite bioceramic sol-gel coatings on surgical grade 316L SS for biomedical applications. Ceram Int2007; 33: 605–605.
16.
SuzukiTFujibayashiSNakagawaY. Ability of zirconia double coated with titanium and hydroxyapatite to bond to bone under load-bearing conditions. Biomaterials2006; 27: 996–996.
17.
EvisZSatoMWebsterTJ. Increased osteoblast adhesion on nanograined hydroxyapatite and partially stabilized zirconia composites. J Biomed Mater Res2006; 78A: 500–500.
18.
ChiuCYHsuHCTuanWH. Effect of zirconia addition on the microstructural evolution of porous hydroxyapatite. Ceram Int2007; 33: 715–715.
19.
MansurCPopeMPascucciMR. Zirconia-calcium phosphate composites for bone replacement. Ceram Int1998; 24: 77–77.
20.
KumarRPrakashKHCheangP. Microstructure and mechanical properties of spark plasma sintered zirconia-hydroxyapatite nano-composite powders. Acta Mater2005; 53: 2327–2327.
21.
GuoHBKhorKABoeyYC. Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering. Biomaterials2003; 24: 667–667.
22.
ZhangJXIwasaMKotobukiN. Fabrication of hydroxyapatite-zirconia composites for orthopedic applications. J Am Ceram Soc2006; 89: 3348–3348.
23.
AdolfssonEAlberius-HenningPHermanssonL. Phase analysis and thermal stability of hot isostatically pressed zirconia-hydroxyapatite composites. J Am Ceram Soc2000; 83: 2798–2798.
24.
MatsunoTMoritaMWatanabeK. Strength of bond to bone and cytotoxicity of sintered bodies of hydroxyapatite/zirconia composite particles. J Mater Sci-Mater Med2003; 14: 547–547.
25.
Rapacz-KmitaASlosarczykAPaszkiewiczZ. Phase stability of hydroxyapatite-zirconia (HAp-ZrO2) composites for bone replacement. J Mol Struct2004; 704: 333–333.
26.
SungYMShinYKRyuJJ. Preparation of hydroxyapatite/zirconia bioceramic nanocomposites for orthopaedic and dental prosthesis applications. Nanotechnology2007; 18.
27.
WhitedBMSkrticDLoveBJ. Osteoblast response to zirconia-hybridized pyrophosphate-stabilized amorphous calcium phosphate. J Biomed Mater Res2006; 76A: 596–596.
28.
SilvaVVLameirasFSLobatoZIP. Biological reactivity of zirconia-hydroxyapatite composites. J Biomed Mater Res2002; 63: 583–583.
SilvaVVLameirasFSDominguesRZ. Synthesis and characterization of calcia partially stabilized zirconia-hydroxyapatite powders prepared by co-precipitation method. Ceram Int2001; 27: 615–615.
31.
SilvaVVLameirasFSDominguesRZ. Microstructural and mechanical study of zirconia-hydroxyapatite (ZH) composite ceramics for biomedical applications. Compos Sci Technol2001; 61: 301–301.
32.
SilvaVVLameirasFS. Synthesis and characterization of composite powders of partially stabilized zirconia and hydroxyapatite. Mater Charact2000; 45: 51–51.
33.
SilvaVVDominguesRZ. Hydroxyapatite-zirconia composites prepared by precipitation method. J Mater Sci-Mater Med1997; 8: 907–907.
34.
KnowlesJCTalalSSantosJD. Sintering effects in a glass reinforced hydroxyapatite. Biomaterials1996; 17: 1437–1437.
35.
KobayashiSKawaiWWakayamaS. The effect of pressure during sintering on the strength and the fracture toughness of hydroxyapatite ceramics. J Mater Sci-Mater Med2006; 17: 1089–1089.
36.
KothapalliCWeiMVasilievA. Influence of temperature and concentration on the sintering behavior and mechanical properties of hydroxyapatite. Acta Mater2004; 52: 5655–5655.
37.
DelgadoJAMorejonLMartinezS. Zirconia-toughened hydroxyapatite ceramic obtained by wet sintering. J Mater Sci-Mater Med1999; 10: 715–715.
38.
KimHWKongYMKohYH. Pressureless sintering and mechanical and biological properties of fluor-hydroxyapatite composites with zirconia. J Am Ceram Soc2003; 86: 2019–2019.
39.
BarraletJEBestSMBonfieldW. Effect of sintering parameters on the density and microstructure of carbonate hydroxyapatite. J Mater Sci-Mater Med2000; 11: 719–719.
40.
PramanikSAgarwalAKRaiKN. Development of high strength hydroxyapatite by solid-state-sintering process. Ceram Int2007; 33: 419–419.
41.
MostafaNY. Characterization, thermal stability and sintering of hydroxyapatite powders prepared by different routes. Mater Chem Phys2005; 94: 333–333.
42.
NayarSSinhaMKBasuD. Synthesis and sintering of biomimetic hydroxyapatite nanoparticles for biomedical applications. J Mater Sci-Mater Med2006; 17: 1063–1063.
43.
ZhangJXTanakaHYeF. Colloidal processing and sintering of hydroxyapatite. Mater Chem Phys2007; 101: 69–69.
44.
CaiSYuXZXiaoZY. Synthesis and sintering of nanocrystalline hydroxyapatite powders by gelatin-based precipitation method. Ceram Int2007; 33: 193–193.
45.
GuoLHHuangMZhangXD. Effects of sintering temperature on structure of hydroxyapatite studied with Rietveld method. J Mater Sci-Mater Med2003; 14: 817–817.
46.
LaquerrierePGrandjean-LaquerriereAGuenounouM. Correlation between sintering temperature of hydroxyapatite particles and the production of inflammatory cytokines by human monocytes. Colloids Surf B2003; 30: 207–207.
47.
BarraletJEFlemingGJPCampionC. Formation of translucent hydroxyapatite ceramics by sintering in carbon dioxide atmospheres. J Mater Sci2003; 38: 3979–3979.
48.
KimHWNohYJKohYH. Effect of CaF2 on densification and properties of hydroxyapatite-zirconia composites for biomedical applications. Biomaterials2002; 23: 4113–4113.
49.
RaoRRKannanTS. Synthesis and sintering of hydroxyapatite-zirconia composites. Mater Sci Eng C2002; 20: 187–187.
50.
TowlerMRGibsonIRBestSM. Novel processing of hydroxyapatite-zirconia composites using nano-sized particles. J Mater Sci Lett2000; 19: 2209–2209.
51.
EvisZDoremusRH. Effect of ZrF4 on hot-pressed hydroxyapatite/monoclinic zirconia composites. Scr Mater2007; 56: 53–53.
52.
InuzukaMNakamuraSKishiS. Hydroxyapatite-doped zirconia for preparation of biomedical composites ceramics. Solid State Ionics2004; 172: 509–509.
53.
LiJLiaoHHermanssonL. Sintering of partially-stabilized zirconia and partially-stabilized zirconia-hydroxyapatite composites by hot isostatic pressing and pressureless sintering. Biomaterials1996; 17: 1787–1787.
54.
MatsumotoTOkazakiMInoueM. Biodegradation of carbonate apatite/collagen composite membrane and its controlled release of carbonate apatite. J Biomed Mater Res2002; 60: 651–651.
55.
MatsunoTWatanabeKOnoK. Microstructure and mechanical properties of sintered body of zirconia coated hydroxyapatite particles. J Mater Sci Lett2000; 19: 573–573.
56.
ChaudhryAAYanHGongK. High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering. Acta Biomater2011; 7: 791–791.
57.
MunirZAAnselmi-TamburiniUOhyanagiM. The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. J Mater Sci2006; 41: 763–763.
58.
GuYWLohNHKhorKA. Spark plasma sintering of hydroxyapatite powders. Biomaterials2002; 23: 37–37.
59.
XuJLKhorKAGuYW. Radio frequency (rf) plasma spheroidized HA powders: powder characterization and spark plasma sintering behavior. Biomaterials2005; 26: 2197–2197.
60.
OmoriMOnokiTHashidaT. Low temperature synthesis of hydroxyapatite from CaHPO4 center dot 2H2O and Ca(OH)2 based on effect of the spark plasma system (SPS). Ceram Int2006; 32: 617–617.
61.
GuoXYXiaoPLiuJ. Fabrication of nanostructured hydroxyapatite via hydrothermal synthesis and spark plasma sintering. J Am Ceram Soc2005; 88: 1026–1026.
62.
XuJLKhorKA. Chemical analysis of silica doped hydroxyapatite biomaterials consolidated by a spark plasma sintering method. J Inorg Biochem2007; 101: 187–187.
63.
XuJLKhorKAKumarR. Physicochemical differences after densifying radio frequency plasma sprayed hydroxyapatite powders using spark plasma and conventional sintering techniques. Mater Sci Eng A2007; 457: 24–24.
64.
WatanabeYIkomaTMonkawaA. Fabrication of transparent hydroxyapatite sintered body with high crystal orientation by pulse electric current sintering. J Am Ceram Soc2005; 88: 243–243.
65.
KhalilKAKimHYKimSW. Observation of toughness improvement of the hydroxyapatite bioceramics densified using high-frequency induction heat sintering. Int J Appl Ceram Technol2007; 4: 30–30.
66.
KumarRCheangPKhorKA. Spark plasma sintering and in vitro study of ultra-fine HA and ZrO2-HA powders. J Mater Process Technol2003; 140: 420–420.
ShenZJAdolfssonENygrenM. Dense hydroxyapatite-zirconia ceramic composites with high strength for biological applications. Adv Mater2001; 13: 214–214.
69.
BoldrinPHebbAKChaudhryAA. Direct synthesis of nanosized NiCo2O4 spinel and related compounds via continuous hydrothermal synthesis. Ind Eng Chem Res2007; 46: 4830–4830.
70.
CabanasADarrJALesterE. A continuous and clean one-step synthesis of nano-particulate Ce1-xZrxO2 solid solutions in near-critical water. Chem Commun2000; 901.
71.
CabanasADarrJALesterE. Continuous hydrothermal synthesis of inorganic materials in a near-critical water flow reactor; the one-step synthesis of nano-particulate Ce1-xZrxO2 (x=0-1) solid solutions. J Mater Chem2001; 11: 561–561.
72.
WengXLBoldrinPAbrahamsI. Direct syntheses of mixed ion and electronic conductors La4Ni3O10 and 3Ni2O7 from nanosized coprecipitates. Chem Mater2007; 19: 4382–4382.
73.
WengXLBoldrinPAbrahamsI. Direct syntheses of Lan + 1NinO3n + 1 phases (n = 1, 2, 3 and infinity) from nanosized co-crystallites. J Solid State Chem2008; 181: 1123–1123.
74.
WengXLCockcroftJKHyettG. High-Throughput Continuous Hydrothermal Synthesis of an Entire Nanoceramic Phase Diagram. J Comb Chem2009; 11: 829–829.
75.
WengXLPerstonBWangXZ. Synthesis and characterization of doped nano-sized ceria-zirconia solid solutions. Appl Catal B2009; 90: 405–405.
76.
WengXLBrettDYufitV. Highly conductive low nickel content nano-composite dense cermets from nano-powders made via a continuous hydrothermal synthesis route. Solid State Ionics2010; 181: 827–827.
77.
ZhangZGoodallJBMMorganDJ. Photocatalytic activities of N-doped nano-titanias and titanium nitride. J Eur Ceram Soc2009; 29: 2343–2343.
ChaudhryAAHaqueSKelliciS. Instant nano-hydroxyapatite: a continuous and rapid hydrothermal synthesis. Chem Commun2006; 2286–2286.
80.
ChaudhryAAGoodallJVickersM. Synthesis and Characterisation of Magnesium Substituted Calcium Phosphate Bioceramic Nanoparticles made via Continuous Hydrothermal Flow Synthesis. J Mater Chem2008; 18: 5900–5900.
81.
HuangJHingK. Standard test method for the biaxial flexural testing of bioceramics and related materials, Biomaterials Testing Laboratory, Mechanical Testing Facility, IRC in Biomedical Materials, Queen Mary University of London, 2002.
82.
KimBNMoritaKLimJH. Effects of Preheating of Powder Before Spark Plasma Sintering of Transparent MgAl2O4 Spinel. J Am Ceram Soc2010; 93: 2158–2158.
83.
ZhangHDarvellBW. Morphology and structural characteristics of hydroxyapatite whiskers: Effect of the initial Ca concentration, Ca/P ratio and pH. Acta Biomater2011; 7: 2960–2960.
84.
GhoshASuriAKPandeyM. Nanocrystalline zirconia-yttria system – a Raman study. Mater Lett2006; 60: 1170–1170.
85.
SiuGGStokesMJLiuYL. Variation of fundamental and higher-order Raman spectra of ZrO2 nanograins with annealing temperature. Phys Rev B1999; 59: 3173–3173.
86.
IshikawaKDucheynePRadinS. Determination of the Ca/P Ratio in Calcium-Deficient Hydroxyapatite Using X-Ray-Diffraction Analysis. J Mater Sci-Mater Med1993; 4: 165–165.
87.
StubicanVSRaySP. Phase-Equilibria and Ordering in System Zro2-Cao. J Am Ceram Soc1977; 60: 534.
88.
NayakYRanaRPratiharS. Pressureless sintering of dense hydroxyapatite-zirconia composites. J Mater Sci-Mater Med2008; 19: 2437–2437.
