Eight different chemicals were investigated as potential candidate coupling agents for phosphate glass fibre reinforced polylactic acid composites. Evidence of reaction of the coupling agents with phosphate glass and their effect on surface wettability and glass degradation were studied along with their principle role of improving the interface between glass reinforcement and polymer matrix. It was found that, with an optimal amount of coupling agent on the surface of the glass/polymer, interfacial shear strength improved by a factor of 5. Evidence of covalent bonding between agent and glass was found for three of the coupling agents investigated, namely: 3-aminopropyltriethoxysilane; etidronic acid and hexamethylene diisocyanate. These three coupling agents also improved the interfacial shear strength and increased the hydrophobicity of the glass surface. It is expected that this would provide an improvement in the macroscopic properties of full-scale composites fabricated from the same materials which may also help to retain these properties for the desired length of time by retarding the breakdown of the fibre/matrix interface within these composites.
FurukawaTMatsusueYYasunagaT. Biodegradation behavior of ultra-high-strength hydroxyapatite/poly(-lactide) composite rods for internal fixation of bone fractures. Biomaterials2000; 21(9): 889–898.
TörmäläPVaseniusJVainionpääS. Ultra-high-strength absorbable self-reinforced polyglycolide (SR-PGA) composite rods for internal fixation of bone fractures: in vitro and in vivo study. J Biomed Mater Res1991; 25(1): 1–22.
5.
KasugaTOtaYNogamiM. Preparation and mechanical properties of polylactic acid composites containing hydroxyapatite fibers. Biomaterials2001; 22(1): 19–23.
6.
PihlajamakiHBostmanOHirvensaloE. Absorbable pins of self-reinforced poly-L-lactic acid for fixation of fractures and osteotomies. J Bone Joint Surg Br1992; 74-B(6): 853–857.
7.
AhmedICroninPSAbou NeelEA. Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite. J Biomed Mater Res Part B: Appl Biomater2009; 89B(1): 18–27.
8.
FelfelRMAhmedIParsonsAJ. Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plates. J Biomater Appl2012; 26(7): 765–789.
9.
ParsonsAJAhmedIHanN. Mimicking bone structure and function with structural composite materials. J Bionic Eng2010; 7(Supplement 1): S1–S10.
10.
ParsonsAJAhmedIHaqueP. Phosphate glass fibre composites for bone repair. J Bionic Eng2009; 6(4): 318–323.
11.
KnowlesJC. Phosphate based glasses for biomedical applications. J Mater Chem2003; 13(10): 2395–2401.
12.
ParsonsAJBurlingLDScotchfordCA. Properties of sodium-based ternary phosphate glasses produced from readily available phosphate salts. J Non-Cryst Solids2006; 352(50–51): 5309–5317.
13.
KhanRAKhanMASultanaS. Mechanical, degradation, and interfacial properties of synthetic degradable fiber reinforced polypropylene composites. J Reinf Plast Compos2010; 29(3): 466–476.
14.
KhanRAParsonsAJJonesIA. Surface treatment of phosphate glass fibers using 2-hydroxyethyl methacrylate: fabrication of poly(caprolactone)-based composites. J Appl Polym Sci2009; 111(1): 246–254.
15.
RamsaySDPilliarRMSanterreJP. Fabrication of a biodegradable calcium polyphosphate/polyvinyl-urethane carbonate composite for high load bearing osteosynthesis applications. J Biomed Mater Res Part B: Appl Biomater2010; 94B(1): 178–186.
16.
RamsaySDPilliarRMYangL. Calcium polyphosphate/polyvinyl acid-carbonate copolymer based composites for use in biodegradable load-bearing composites for orthopaedic implant fabrication. Key Eng Mater2005; 284–286: 787–790.
17.
DiBenedettoAT. Tailoring of interfaces in glass fiber reinforced polymer composites: a review. Mater Sci Eng A2001; 302(1): 74–82.
18.
Cozien-CazucSParsonsAWalkerG. Effects of aqueous aging on the mechanical properties of P40Na20Ca16Mg24 phosphate glass fibres. J Mater Sci2008; 43(14): 4834–4839.
19.
DongG-CSunJ-SYaoC-H. A study on grafting and characterization of HMDI-modified calcium hydrogenphosphate. Biomaterials2001; 22(23): 3179–3189.
20.
HaquePBarkerIAParsonsA. Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber-reinforced PLA composites. J Polym Sci Part A: Polym Chem2010; 48(14): 3082–3094.
21.
HaquePParsonsAJBarkerIA. Interfacial properties of phosphate glass fibres/PLA composites: effect of the end functionalities of oligomeric PLA coupling agents. Compos Sci Technol2010; 70(13): 1854–1860.
22.
JiangGEvansMEJonesIA. Preparation of poly([epsilon]-caprolactone)/continuous bioglass fibre composite using monomer transfer moulding for bone implant. Biomaterials2005; 26(15): 2281–2288.
23.
OnalLCozien-CazucSJonesIA. Water absorption properties of phosphate glass fiber-reinforced poly-ɛ-caprolactone composites for craniofacial bone repair. J Appl Polym Sci2008; 107(6): 3750–3755.
24.
PhillipsMJDuncansonPWilsonK. Surface modification of bioceramics by grafting of tailored allyl phosphonic acid. Adv Appl Ceram2005; 104(5): 261–267.
25.
PanzavoltaSTorricelliPBracciB. Functionalization of biomimetic calcium phosphate bone cements with alendronate. J Inorg Biochem2010; 104(10): 1099–1106.
26.
PiggottMR. Why interface testing by single-fibre methods can be misleading. Compos Sci Technol1997; 57(8): 965–974.
27.
ChoiN-SParkJ-EKangS-K. Quasi-disk type microbond pull-out test for evaluating fiber/matrix adhesion in composites. J Compos Mater2009; 43(16): 1663–1677.
28.
PiggottMR. Debonding and friction at fibre-polymer interfaces. I: Criteria for failure and sliding. Compos Sci Technol1987; 30(4): 295–306.
29.
PitkethlyMJFavreJPGaurU. A round-robin programme on interfacial test methods. Compos Sci Technol1993; 48(1–4): 205–214.
30.
DiFranciaCWardTCClausRO. The single-fibre pull-out test. 1: Review and interpretation. Composites Part A: Appl Sci Manuf1996; 27(8): 597–612.
31.
ShafrinEGZismanWA. Constitutive relations in the wetting of low energy surfaces and the theory of the retraction method of preparing monolayers. J Phys Chem1960; 64(5): 519–524.
32.
HasanM. Investigation of coupling agents mediated interfacial integrity improvements for phosphate class fibre reinforced composite for bone repair applications, Nottingham: University of Nottingham, 2012, pp. 234–234.
33.
YazdaniHMorshedianJKhonakdarHA. Effects of silane coupling agent and maleic anhydride-grafted polypropylene on the morphology and viscoelastic properties of polypropylene–mica composites. Polym Compos2006; 27(5): 491–496.
34.
KurthDGBeinT. Surface reactions on thin layers of silane coupling agents. Langmuir1993; 9(11): 2965–2973.
35.
YangCLWengWJDuPY. XPS Studies of hydroxyapatite powders by grafting octadecyltrichlorosilane. Key Eng Mater2007; 330–332: 765–768.
36.
PapapoulosSE. The role of bisphosphonates in the prevention and treatment of osteoporosis. Am J Med1993; 95(5, Supplement 1): S48–S52.
37.
ShinkaiIOhtaY. Alendronate. Bioorg Med Chem1996; 4(1): 3–4.
38.
HaqueP. Oligomeric PLA coupling agents for phosphate glass fibres/PLA composites, Nottingham: The University of Nottingham, 2011, pp. 173–173.
