Biomedical Silicone Elastomers as Carriers for Controlled Release

Abstract

Biomedical silicone elastomers have been studied for their potential application as carriers for controlled release of drugs, since these materials display a unique combination of properties, which might be favorable to the above use. A two component silicone gel system was used and various cross-linker ratio was applied, in order to produce networks with varying crosslink density. Swelling experiments in toluene were run in order to evaluate the network characteristics. The silicone elastomer was loaded with salicylic acid and propranolol hydrochloride and their delivery in distilled water was followed. The results showed that release is almost of zero order for high loading of salicylic acid, while delivery seems to be diffusion controlled up to a certain limit. The administered drug concentrations are relatively low if silicone discs are used, due to the hydrophobic nature of this material. On the other hand, when membranes are used with a thickness of 0.1-0.2 mm, then the delivery rate is much higher depending of course on the hydrophilic character of the drug.

Keywords

biomedical elastomers silicones controlled release of drugs propranolol membranes

Get full access to this article

View all access options for this article.

References

1. Andreopoulos, A. G. and M. Evangelatou . 1994. J. Biomater. Appl., 8:344.

2. Demetriou, P. P. , A. G. Andreopoulos and G. L. Polyzois . 1988. J. Mater. Sci. Lett., 7:233-234.

3. Andreopoulos, A. G. , G. L. Polyzois and P. P. Demetriou . 1988. J. Mater. Sci. Lett. 7:235-238.

4. Lontz, J. E. , J. W. Schweiger and A. W. Burger . 1976. "Modifying Stress Strain Profiles of Polysiloxane Elastomers for Improved Maxillofacial Conformity," in 1st International Symposium on Facial Prosthetics, Arnhem, The Netherlands, April 19-23.

5. Lee, P. I. and W. R. Good . 1987. "Overview of controlled-release drug delivery," ACS Symposium Series, 348:1-13.

6. Vlachou, M. , N. H. Choulis , M. Efentakis and A. G. Andreopoulos . 1996. "The Effect of Modification of Acrylic Resins on Controlled Release and Bioadhesion," J. Biomater. Appl., 10:217-229.

7. Linhardt, R. J. , H. B. Rosen , R. Langer . 1983. "Bioerodable polyanhydrided for controlled drug delivery," Polym. Preprints, 24:47-48.

8. Brand, C. and M. Vert . 1983. "Poly(beta-malic acid) derivatives-new type of polyvalent polymeric drug carrier," Polym. Preprints, 24:71-72.

9. Migliaresi, C. , L. Nicodemo , L. Nicalais and P. Passerini . 1984. "Water sorption and desorption in 2-hydroxyethylmethacrylate/methylmethacrylete polymers," Polymer, 25:686-689.

10.

10. Lee, P. I. 1985. "Kinetics of drug release from hydrogel matrices," J. Controlled Release, 2:277-288.

11.

11. Pinchuk, L. , E. C. Eckstein and M. R. van de Mark . 1984. "Effects of low levels of methacrylic acid on swelling behaviour of poly (2-hydroxyethyl methacrylate)," J. Appl. Polym. Sci., 29:1749-1760.

12.

12. Andreopoulos, A. G. 1989. "Preparation and Swelling of Polymeric Hydrogels," J. Appl. Polym. Sci., 37:2121-2129.

13.

13. Andreopoulos, A. G. 1989. "Properties of Poly(2-hydroxyethyl acrylate) Hydrogels," Biomaterials, 10:101-104.

14.

14. Andreopoulos, A. G. 1992. "Preparation of Hydrophilic Polymer Networks by Post Curing Process," J. Appl. Polym. Sci., 45:1005-1010.

15.

15. Andreopoulos, A. G. , T. Korakis , E. Dounis , K. Kanellakopoulou , A. Anastasiadis and P. Tzivelekis . 1996. "In vitro release of new quinolones from biodegradable systems. A comparative study," J. Biomater. Appl., 10:338-347.

16.

16. Andreopoulos, A. G. 1995. "Controlled release of Newer Quinolone from biodegradable systems based on Poly(lactic acid)," J. Biomater. Appl., 10:163-170.

17.

17. Andreopoulos, A. G. 1994. "Plasticization of Biodegradable Polymers for Use in Controlled Release," Clinical Materials, 15:89-92.

18.

18. Andreopoulos, A. G. and M. Evangelatou . 1993. "Swelling properties of cross-linked maxillofacial elastomers," J. Appl. Polym. Sci., 50:729-733.