Joining of thermoplastic composites is an important step in the manufacturing of aerospace thermoplastic composite structures. Therefore, several joining methods for thermoplastic composite components have been under investigation and development. In general, joining of thermoplastic composites can be categorized into mechanical fastening, adhesive bonding, solvent bonding, co-consolidation, and fusion bonding or welding. Fusion bonding or welding has great potential for the joining, assembly, and repair of thermoplastic composite components and also offers many advantages over other joining techniques. The process of fusion-bonding involves heating and melting the polymer on the bond surfaces of the components and then pressing these surfaces together for polymer solidification and consolidation. The focus of this paper is to review the different fusion-bonding methods for thermoplastic composite components and present recent developments in this area. The various welding techniques and the corresponding manufacturing methodologies, the required equipment, the effects of processing parameters on weld performance and quality, the advantages/disadvantages of each technique, and the applications are described.
1. Chawla, K.K. (1998). Composite Materials, Science and Engineering. Springer-Verlag New York Inc., New York .
2.
2. Benatar, A. and Gutowski, T.G. (1986). Methods for Fusion Bonding Thermoplastic Composites , SAMPE Quarterly. 18(1): 35–42 .
3.
3. Todd, S.M. (1990). Joining Thermoplastic Composites , 22nd International SAMPE Technical Conference, pp. 383–392 .
4.
4. Stokes, V.K. (1989). Joining Methods for Plastics and Plastic Composites: An Overview , Polymer Engineering and Science, 29(19): 1310–1324 .
5.
5. Wedgewood, R. and Hardy, P.E. (1996). Induction Welding of Thermoset Composite Adherends using Thermoplastic Interlayers and Susceptors , 28th International SAMPE Technical Conference, pp. 850–861 .
6.
6. Rudolf, R. , Mitschang, P. , Neitzel, M. and Rueckert, C. (1999). Welding of High-Performance Thermoplastic Composites , Polymer and Polymer Composites, 7(5): 309–315 .
8. Silverman, E.M. and Griese, R.A. (1989). Joining Methods for Graphite/PEEK Thermoplastic Composites , SAMPE Journal. 25(5): 34–38 .
9.
9. Stokes, V.K. (1988). Vibration Welding of Thermoplastics Part I: Phenomenology of the Welding Process , Polymer Engineering and Science. 28(11): 718–727 .
10.
10. Nonhof, C.J. , Riepen, M. and Melchers A.W. (1996). Estimates for Process Conditions During the Vibration Welding of Thermoplastic , Polymer Engineering and Science. 36(15): 2018–2028 .
11.
11. Rudolf, R. , Neitzel, M. and Strohfuss, W. (1997). Interaction of Variables in Welding of Continuous Fiber Reinforced Thermoplastics , 29th International SAMPE Technical Conference. 29: 462–474 .
12.
12. Bates, P. , Couzens, D. and Kendall, J. (2001). Vibration Welding of Continuously Reinforced Thermoplastic Composites , Journal of Thermoplastic Composite Materials. 14: 344–354 .
13.
13. Gehde, M. , Giese, M. and Ehrenstein, G.W. (1997). Welding of Thermoplastics Reinforced with Random Glass Mat , Polymer Engineering and Science. 37(4): 702–714 .
14.
14. Ageorges, C. , Ye, L. and Hou, M. (2001). Advances in Fusion Bonding Techniques for Joining Thermoplastic Matrix Composites: A Review , Composites Part A: Applied Science and Manufacturing. 32: 839–857 .
15.
15. Grimm, R.A. (1995). Welding Processes for Plastics , Advance Materials and Processes. 3: 27–30 .
17. Stokes, V.K. (1988). Vibration Welding of Thermoplastics Part II: Analysis of Welding Process , Polymer Engineering and Science. 28(11): 728–739 .
18.
18. Stokes, V.K. (1988). Vibration Welding of Thermoplastics Part III: Strength of Polycarbonate Butt Welds , Polymer Engineering and Science. 28(15): 989–997 .
19.
19. Stokes, V.K. (1988). Vibration Welding of Thermoplastics Part IV: Strengths of Poly(Butylene Terephthalate) , Polyetherimide, and Modified Polyphenylene Oxide Butt Welds, Polymer Engineering and Science. 28(15): 998–1008 .
20.
20. Potente, H. and Uebbing, M. (1997). Friction Welding of Polyamides , Polymer Engineering and Science. 37(4): 726–737 .
21.
21. Stokes, V.K. and Poslinski, A.J. (1995). Effects of Variable Viscosity on the Steady Melting of Thermoplastic During Spin Welding , Polymer Engineering and Science. 35(5): 441–457 .
22.
22. Stokes, V.K. (1988). Analysis of Friction (spin)-Welding Process for Thermoplastics , Journal of Material Science. 23: 2772–2785 .
23.
23. Tappe, P. and Potente, H. (1989). New Findings in the Spin Welding of Plastics , Annual Technical Conference/Society of Plastics Engineers (ANTEC ‘89). 710–715 .
24.
24. Tappe, P. and Potente, H. (1989). New Results on the Spin Welding of Plastics , Polymer Engineering and Science. 29(23): 1655–1660 .
26. Lin, C.B. and Wu, L.C. (2000). Friction Welding of Similar and Dissimilar Materials: PMMA and PVC . Polymer Engineering and Science. 40(8): 1931–1941 .
27.
27. Crawford, R.J. and Tam, Y. (1981). Friction Welding of Plastics , Journal of Materials Science. 16: 3275–3282 .
28.
28. Benatar, A. and Gutowski, T.G. (1989). Ultrasonic Welding of PEEK Graphite APC-2 Composites , Polymer Engineering and Science. 29(23): 1705–1721 .
29.
29. Taylor, N.S. and Watson, M.N. (1988). Welding Techniques for Plastics and Composites , Joining and Materials. 70–73 .
30.
30. Kenney, W.E. (1992). Designing Plastic Parts for Ultrasonic Assembly , Machine Design. 65–68 .
31.
31. Liu, S.-J. , Chang, I.-T. and Hung, S.-W. (2001). Factors Affecting the Joint Strength of Ultrasonically Welded Polypropylene Composites , Polymer Engineering and Science. 22(1): 132–141 .
32.
32. Benatar, A. and Cheng, Z. (1989). Ultrasonic Welding of Thermoplastics in the Far-field , Polymer Engineering and Science. 29(23): 1699–1704 .
33.
33. Strong, B. , Johnson, D.P. and Johnson, B.A. (1990). Variables Interactions in Ultrasonic Welding of Thermoplastic Composites , SAMPE Quarterly. 21(2): 36–41 .
34.
34. Eveno, E.C. and Gillespie, Jr., J.W. (1989). Experimental Investigation of Ultrasonic Welding of Graphite Reinforced Polyetheretherketone Composites , 21st International SAMPE Technical Conference. 21: 923–934 .
35.
35. Contreras, F. , Trillo, E.A. and Murr, L.E. (2002). Friction-stir Welding of a Berylliumaluminum Powder Metallurgy Alloy , Journal of Materials Science. 37: 89–99 .
36.
36. Shinoda, T. (2001). Recent Development of Friction Stir Welding–New Solid State Joining Technology , International Journal of Materials and Product Technology. 2: 453–460 .
38. Fernie, J.A. , Threadgill, P.L. , and Watson, M.N. (1991). Progress in Joining of Advanced Materials , Welding and Metal Fabrication. 59(4): 179–184 .
39.
39. Chen, Y.S. and Benatar, A. (1995). Infrared Welding of Polypropylene , Annual Technical Conference/Society of Plastics Engineers. 1: 1235–1238 .
40.
40. Swartz, H.D. and Swartz, J.L. (1989). Focused Infrared Melt Fusion: Another Option for Welding Thermoplastic Composites, SME Technical Paper: Joining Composites. EM89–175–1—EM89–175–16.
41.
41. Vetter, J. , Benende, V. and Erlangen, G.W. (2000). Failure Behavior of Extrusion Welding Seams Made of Thermoplastic Plastics , Welding and Cutting. 52(2): E34–E40 .
42.
42. Nonhof, J. (1994). Laser Welding of Polymers , Polymer Engineering and Science. 34(20): 1547–1549 .
43.
43. Hilton, P.A. , Jones, I.A. and Sallavanti, R.A. (2000). Laser Welding of Fabrics Using Infrared Absorbing Dyes , ASM International/Proceedings from Joining of Advanced and Specialty Materials, pp. 136–141 .
44.
44. Hansch, D. , Putz, H. and Treusch, H.G. (1998). Joining Hard and Soft Plastics with a Diode Laser , Kunststoffe Plast Europe. 88(2): 25–26 .
45.
45. Becker, F. and Potente, H. (2002). A step Towards Understanding the Heating Phase of Laser Transmission Welding in Polymers , Polymer Engineering and Science. 42(2): 365–374 .
46.
46. Gillner, A. , Rosse, L. , Kramer, T. , Olowinsky, A. and Wild, M. (2000). Laser Joining of Micro Components with Fiber Lasers and Diode Lasers , International Society for Optical Engineering. 4088: 260–263 .
47.
47. Duley, W.W. and Mueller, R.E. (1992). CO2 Laser Welding of Polymers , Polymer Engineering and Science. 32(9): 582–585 .
48.
48. Bachmann, F. , Takahashi, R. and Fujishima, S. (2000). Micro Materials Processing with High Power Diode Lasers , International Society for Optical Engineering. 4088: pp. 220–223 .
49.
49. Pistor, M. and Guceri, S.I. (1999). Crystallinity of On-line Consolidation Thermoplastic Composites , Journal of Composite Materials. 33(4): 306–324 .
50.
50. Pistor, C.M. (1996). Laser Assisted Tape Winding of Thermoplastic Composites: A new Process for Fabricating a Variety of Ceramic Parts , Materials Technology. 11(3): 101–103 .
51.
51. Pistor, C.M. , Yardimic, M.A. , Castro, R. and Guceri, S.I. (1997). Evaluation of Process Control During on-line Consolidation of Thermoplastic Composites , CAE and Intelligent Processing of Polymeric Materials/American Society of Mechanical Engineers. 79: 167–175 .
52.
52. Sanders, P. (1987). Electromagnetic Welding: An Advance in Thermoplastics Assembly , Materials and Design. 8(1): 41–45 .
53.
53. Yarlagadda, S. , Fink, B.K. , and Gillespie, Jr., J.W. (1998). Resistive Susceptor Design fo Uniform Heating During Induction Bonding of Composites , Journal of Thermoplastic Composites. 11: 321–337 .
54.
54. Lin, W. , Buneman, O. and Miller, A.K. (1991). Induction Heating Model for Graphite Fiber/Thermoplastic Matrix Composites , SAMPE Journal. 27(6): 45–51 .
55.
55. Zach, T. , Jew, J. , North, T.H. and Woodhams, R.T. (1989). Joining of High Strength Oriented Polypropylene using Electromagnetic Induction Bonding and Ultrasonic Welding , Materials Science and Technology. 5: 281–287 .
56.
56. Border, J. and Salas, R. (1989). Induction Heated Joining of Thermoplastic Composites Without Metal Susceptors , 34th International SAMPE Symposium, pp. 2569–2578 .
57.
57. Lawless, G.W. and Reinhart, T.J. (1992). A Study of the Induction Heating of Organic Composites , 24th International SAMPE Technical Conference, pp. T375–T384 .
58.
58. Spain, K.D. (1999). High Frequency Plastic Welding , Society of Manufacturing Engineers. pp. AD99-128-1–AD99-128-20 .
59.
59. Hahn, O. and Ewerszumrode, A. (1998). Adhesive Curing by Radio-frequency Heating , Welding in the World. 41: 149–155 .
60.
60. Lee, W. and Springer, G. (1984). Interaction of Electromagnetic Radiation with Organic Matrix Composites , Journal of Composite Materials. 18(4): 357–386 .
61.
61. Lee, W. and Springer, G. (1984). Microwave Curing of Composites , Journal of Composite Materials. 18(4): 387–409 .
62.
62. Varadan, V.K. and Varadan, V.V. (1991). Microwave Joining and Repair of Composite Materials , Polymer Engineering and Science. 31(7): 470–486 .
63.
63. Ku, H.S. , Siores, E. , and Ball, J.A.R. (1999). Microwave Facilities for Welding Thermoplastic Composites and Preliminary Results , Journal of Microwave Power and Electromagnetic Energy. 34(4): 195–205 .
64.
64. Siores, E. and Rego, D.D. (1994). Joining Materials with Microwave Energy , Australasian Welding Journal. 18–21 .
65.
65. Staicovici, S. , Wu, C.-Y. and Benatar, A. (1999). Welding and Disassembly of Microwave Welded HDPE Bars , Journal of Reinforced Plastics and Composites. 18(1): 35–43 .
66.
66. Staicovici, S. , Wu, C.-Y. , Benatar, A. and Bahman, Z. (1996). Fractal Analysis and Radiographic Inspection of Microwave Welded HDPE Bars , SPE ANTEC Tech Paper. 42: 1285–1289 .
67.
67. Volpe, V. (1980). Estimation of Electrical Conductivity and Electromagnetic Shielding Characteristics of Graphite/Epoxy Laminates , Journal of Composite Materials. 14: 189–198 .
68.
68. Hou, M. , Ye, L. , and Mai, Y.W. (1999). An Experimental Study of Resistance Welding of Carbon Fiber Fabric Reinforced Polyetherimide (CF Fabric/PEI) Composite Material , Applied Composite Materials. 6: 35–49 .
70. Eveno, C. and Gillespie, Jr. J.W. (1988). Resistance Welding of Graphite Polyetheretherketone Composites: An Experimental Investigation , Journal of Thermoplastic Composite Materials. 1: 322–338 .
71.
71. Eveno, E.C. , Gillespie, Jr., J.W. and Vinson, J.R. (1989). Resistance Welding of Graphite Polyetheretherketone Composites , 47th Annual Technical Conference/American Society of Mechanical Engineers, pp. 493–495 .
72.
72. Ageorges, C. , Ye, L. and Hou, M. (2001). Experimental Investigation of the Resistance Welding for Thermoplastic-Matrix Composites. Part I: Heating Element and Heat Transfer , Composites Science and Technology. 60: 1027–1039 .
73.
73. Ageorges, C. , Ye, L. and Hou, M. (2000). Experimental Investigation of the Resistance Welding for Thermoplastic-Matrix Composites. Part II: Optimum Processing Window and Mechanical Performance , Composites Science and Technology. 60: 1191–1202 .
74.
74. Don, R.C. , Bastien, L. , Jakobsen, T.B. and Gillespie, Jr., J.W. (1990). Fusion Bonding of Thermoplastic Composites by Resistance Heating , SAMPE Journal. pp. 59–66 .
75.
75. Xiao, X.R. , Hoa, S.V. , and Street, K.N. (1992). Processing Modeling of Resistance Welding of APC-2 Composite , Journal of Composite Materials. 26(7): 1031–1049 .
76.
76. Don, R.C. , Bastien, L. , Jakobsen, T.B. , and Gillespie, Jr., J.W. (1989). Fusion Bonding of Thermoplastic Composites by Resistance Heating , 21st International SAMPE Technical Conference. pp. 935–946 .
77.
77. Cogswell, N. , Meakin, P.J. , Smiley, A.J. , Harvey, M.T. and Brooth, C. (1989). Thermoplastic Interlayer Bonding for Aromatic Polymer Composites , 34th International SAMPE Symposium, pp. 2315–2325 .
78.
78. Wu, S.-Y. (1991). Dual Resin Bonding of Thermoplastic Composites , 36th International SAMPE Symposium, pp. 2174–2183 .
79.
79. Yoon, T.-H. and McGrath, J.E. (1991). Adhesion Study of PEEK Graphite Composites , 36th International SAMPE Symposium, pp. 428–436 .
80.
80. Smily, J. , Halbritter, A. , Cogswell, F.N. and Meakin, P.J. (1991). Dual Polymer Bonding of Thermoplastic Composite Structures , Polymer Engineering and Science. 31(7): 526–532 .
81.
81. Hou, M. , Yang, M. , Beehag, A. , Mai, Y.-W. and Ye, L. (1999). Resistance Welding of Carbon Fiber Reinforced Thermoplastic Composite using Alternative Heating Element , Composite Structures. 47: 667–672 .
82.
82. Taylor, N.S. and Davenport, R. (1991). The Resistive Implant Welding of Thermoplastic Composite Materials , 49th Annual Technical Conference/American Society of Mechanical Engineers, pp. 2039–2041 .
83.
83. Don, R.C. , Gillespie, Jr., J.W. , and Lambing, C.L.T. (1992). Experimental Characterization of Processing Performances Relationships of Resistance Welded Graphite/Polyetheretherketone Composite Joints , Polymer Engineering and Science. 32(9): 620–631 .
84.
84. Arias, M. and Ziegmann, G. (1996). The Impulse Resistance Welding: A new Technique for Joining Advanced Thermoplastic Composite Parts , 41st International SAMPE Symposium and Exhibition. 41(2): 1361–1371 .
85.
85. Ageorges, C. and Ye, L. (2001). Simulation of Impulse Resistance Welding for Thermoplastic Matrix Composites , Applied Composite Materials. 8: 133–147 .
