Injection Molding of Postconsumer Wood–Plastic Composites II: Mechanical Properties

Abstract

ABSTRACT: In the first part of this study, fiber-reinforced microcellular foams were produced via injection molding to study their morphological properties as a function of mold temperature as well as wood, blowing agent, and coupling agent concentrations. Yellow birch wood fibers are added to a recycled postconsumer HDPE/PP matrix (85: 15 ratio) in proportions ranging from 0 to 40 wt% and then foamed with a chemical blowing agent. Maleic-anhydride-polypropylene copolymer (MAPP) is also used as a coupling agent in proportions ranging from 0 to 10 wt% of wood content. In this second part, the mechanical properties in flexion, torsion, and traction are presented.

Keywords

injection molding composite,foam mechanical properties MAPP

References

Gosselin, R. , Rodrigue, D. and Riedl, B. (2006). Injection Molding of Postconsumer Wood/Plastic Composites I: Morphology, J. Thermoplast. Compos. Mater. (submitted).

Folkes, M.J. and Kells, D. (1985). Fundamental Considerations in the Injection Processing of Fibre Reinforced Thermoplastics , Plast. Rub. Proc. Appl., 5: 125–131 .

Omnexus (2005). Wood-plastic Composites Gain Popularity, www.omnexus.com.

Stark, N. and Berger, M. (1997). Effect of Species and Particle Size on Properties of Wood- flour- Filled Polypropylene Composites , In: Conference Proceedings: Functional Fillers for Thermoplastics and Thermosets, Madison, p. 119-119 .

Selke, S.E. and Wichman, I. (2004). Wood Fibre/Polyolefin Composites , Composites: Part A, 35(3): 321–326 .

Stark, N.M. (1999). Wood Fiber Derived from Scrap Pallets used in Polypropylene Composites , Forest Prod. J., 49(6): 39–46 .

Gosselin, R. , Rodrigue, D. and Riedl, B. (2004). Injection Molding of Foamed Wood/ Plastic Composites, Proc. of PPS-20, Akron, p. 108-108.

Blanchet, J.F. and Rodrigue, D. (2004). The Effect of Skin Thickness on the Mechanical Properties of Structural Foams , Cell. Polym., 23(4): 193–210 .

Leduc, S. and Rodrigue, D. (2005). Effect of Weld Lines on the Mechanical Properties of Structural Polyethylene Foams, Polymer Processing Society: PPS-21, Leipzig, SL 15–16.

10.

Gosselin, R. (2005). Injection de Mousses Composites Bois/Plastiques d'Origine Post- Consommation, MS Thesis, Dept. Chem. Eng., Universite Laval, Canada.

11.

Leduc, S. and Rodrigue, D. (2005). Effect of Weld Lines on the Injection Molding of Structural Foams , I Foam morphology, Cell. Polym., 24(6): 313–327 .

12.

Doroudiani, S. , Kortschot, M.T. and Park, C.B. (1997). Structure and Mechanical Properties Study of Foam Wood Fiber/Polyethylene Composites , ANTEC Annual Technical Conference, p. 541-541 .

13.

Thomas, C., Ferreiro, V. and Coulon, G. (2004). Influence du taux de cristallinite sur les nanomecanismes de plasticite dans les polymeres semi-cristallins, Forum des microscopies a sonde local, p. 38-38.

14.

Jose, S. , Aprem, A.S. , Francis, B. , Chandy, M.C. , Werner, P. , Alstaedt, V. and Thomas, S. (2004). Phase Morphology, Crystallisation Behaviour and Mechanical Properties of Isotactic Polypropylene/High Density Polyethylene Blends , Eur. Polym. J., 40(9): 2105–2115 .

15.

Bledzki, A.K. and Faruk, O. (2002). Microcellular Wood Fibre Reinforced Polypropylene Composites in an Injection Molding Process , Cell. Polym., 21: 417–428 .

16.

Zhang, Y. and Rodrigue, D. (2005). Polyethylene-Kevlar Composite Foams III: Torsion Properties , Cell. Polym., 24(1): 1–14 .

17.

Zhang, Y. , Rodrigue, D. and Aït-Kadi, A. (2003). Torsion Properties of High Density Polyethylene Foams , J. Cell. Plast., 39(6): 451–474 .

18.

Net Composites (2004). Guide to Composites, www.netcomposites.com.

19.

Qiao, X. , Zhang, Y. and Zhang, Y. (2004). Maleic Anhydride Grafted Polypropylene as a Coupling Agent for Polypropylene Composites Filled with Ink-eliminated Waste Paper Sludge Flour , J. Appl. Polym. Sci., 91(4): 2320–2325 .

20.

Oksman, K. and Clemons, C. (1998). Mechanical Properties and Morphology of Impact Modified Polypropylene-wood Flour Composites , J. Appl. Polym. Sci., 67(9): 1503–1513 .