A commercial grade of polypropylene (PP) is reinforced with nylon-6 fibers of three diameters at levels up to 30wt% PP. The addition of the fibers improve the mechanical properties such as tensile strength and flexural strength. The least diameter fibers give the maximum improvement in mechanical properties. Attempts are made to improve the interfacial adhesion between the fibers and the matrix by grafting the matrix with maleic anhydride in presence of styrene. The mechanical properties show significant improvements as a result of these modifications. The recyclability of these composites are also studied, the PP/ nylon composites/blends obtained by recycling the composites also have better tensile properties.
Tjong, S.C., Li, R.K.Y. and Cheung, T. (1997). Mechanical Behaviour of Calcium Carbonate Particulate-filled Beta Crystalline Phase Polypropylene Composites, Polym. Engng. Sci., 37(1): 166-172.
2.
Hornsby, P.R. and Watson, C.L. (1995). Interfacial Modification of Polypropylene Composites Filled with Magnesium Hydroxide, J. Mater. Sci., 30: 5347-5355.
Maiti, S.N. and Sahrma, K.K. (1992). Studies on Polypropylene Composites Filled with Talc Particles, J. Mater. Sci., 27: 4605-4613.
5.
Chiang, W.Y. and Yang, W.D. (1988). Polypropylene Composites. 1. Studies of the Effect of Grafting of Acrylic Acid and Silane Coupling Agent on the Performance of Polypropylene Mica Composites, J. Appl. Polym. Sci., 35: 807-823.
6.
Rao, K.H. , Forssberg, K.S.E. and Forsling , W. (1998). Interfacial Interactions and Mechanical Properties of Mineral Filled Polymer Composites: Wollastonite in PMMA Polymer Matrix, Colloids & Surfaces A, Physico. Chem. Engng. Aspects, 58: 747-752.
7.
Mareri, P., Bastide, S., Binda, N. and Crespy, A. (1998). Mechanical Behaviour of Polypropylene Composites Containing Fine Mineral Filler: Effect of Filler Surface Treatment, Compos . Sci. Technol., 58: 747-752.
8.
Domka, L. (1994). Modification Estimate of Kaolin, Chalk, and Precipitated Calcium Carbonate as Plastomer and Elastomer Fillers, Colloid. Polym. Sci., 272: 1190-1202.
9.
Lopez-Manchando, M.A. and Arroyo, M. (2000). Thermal and Dynamic Mechanical Properties of Polypropylene and Short Organic Fiber Composites, Polymer, 41(2): 7761-7767.
10.
Lopez-Manchando, M.A. and Arroyo, M. (1999). Crystallization Kinetics of Polypropylene Part 4: Effect of Unmodifies and Azide-modified PET and PA Short Fibres, Polymer, 40(2): 487-495.
11.
Bledzki, A.K. , Reihmane, S. and Gassan, J. (1998). Thermoplastics Reinforced with Wood Fillers: A Literature Review, J. Polym. Plast. Technol. Eng., 37: 451.
12.
Dintcheva, N.T. and La Mantia , F.P. (1999). Recycling of the ``Light Fraction'' from Municipal Post-consumer Plastics: Effect of Adding Wood Fibers, Polym. Adv. Technol., 10: 607.
13.
George, J., Bahgawan, S.S. and Thomas, S. (1996). A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites, J. Therm. Anal., 47: 1121.
14.
Glasser, W.G. , Taib, R., Jain, R.K. and Kander, R. (1999). Synthesis and Properties of poly(butylacrylate-co-butylmethacrylate) Doped with Metal Clusters, J. Appl. Polym. Sci., 73: 1239.
15.
Hamdan, S., Hashim, D.M.A., Ahmad, M. and Embong, S. (2000). Compatability Studies of Polypropylene (PP)-Sago Starch (SS) Blends using DMTA, J. Polym. Res., 7: 237.
16.
Park, B.D. and Balatinecz, J. (1997). Effects of Impact Modifications on the Mechanical Properties of Wood-fiber Thermoplastic Composites with High Impact Polypropylene (HPP), J. Polym. Compos., 18: 79.
17.
Wielage, B., Lampke, T., Marx, G., Nestier, K. and Starke, D. (1999). Thermogravimetric and Differential Scanning Calorimetric Analysis of Natural Fibres and Polypropylene, Thermochim Acta , 337: 169.
18.
Wu, J., Yu, D., Chan, C.M., Kim, J. and Mai, Y.W.J. (2000). Effect of Fiber Pretreatment Condition on the Interfacial Strength and Mechanical Properties of Wood Fiber/PP Composites , J. Appl. Polym. Sci., 76: 1000.
19.
Scheirs, J. (1998). Polymer Recycling, Wiley Series in Polymer Science, New York.
20.
Lopez-Manchado, M.A. and Arroyo Die , M. (1999). Short PET and PA Fibre Composites based on LDPE and HDPE Matrices, Morphology-behaviour Relationship, Die Angewandte Makromolekulare Chemie, 270: 63-68.
21.
Botev, M., Betchev, H., Bikiaris, D. and Panayiotou, C. (1999). Mechanical Properties and Viscoelastic Behavior of Basalt Fiber-reinforced Polypropylene, J. Appl. Polym. Sci., 74: 523-531.
22.
Anongnuch Chantaratcharoen , Chakrit Sirisinha, Taweechai Amornsakchai, Sauvarop Bualek-Limcharoen, Wiriya Meesiri (1999). Improvement of Interfacial Adhesion of poly(m-phenylene isophthalamide) Short Fiber-thermoplastic Elastomer (SEBS) Composites by N-Alkylation on Fiber Surface, J. Appl. Polym. Sci., 74: 2414-2422.
23.
Milewski, J.V. and Katz, H.S. (1987). Hand Book of Reinforcements for Plastics, Van Nostrand Reinhold Company, New York.
24.
Ying Li , Xu-Ming Xie and Bao-Hua Guo (2001). Study on Styrene-assisted Melt Free-radical Grafting of Maleic Anhydride onto Polypropylene, Polymer, 42: 3419-3425.
25.
Silverstein, R.M., Bassler, C.G. and Morrill, T.C. (1998). Spectroscopic Identification of Organic Compounds, 3rd edn, Wiley International Edition, Oxford University Press, Oxford.
26.
Dyer, J.R. (1991). Applications of Absorption Spectroscopy of Organic Compounds, Prentice-Hall, Englewood Cliffs, NJ, USA.
