Melt Rheology during Extrusion of Polypropylene Composites Filled with Diatomite Particles

Abstract

The melt volume flow rate (MVR) is an important parameter for characterization of flow properties of polymer. The MVR of the polypropylene composites filled with diatomite particles was measured by means of a MVR instrument to investigate the effects of the filler content, particle size and extrusion conditions (temperature 210—230°C, load 5.0—12.5 kg) on the melt flow properties of the composite systems. The results showed that the MVR of the composites increased as a quadratic function with the increase of load, while decreased nonlinearly with the increase of filler particle diameter. The MVR was a linear function of temperature. The MVR decreased quickly when the filler volume fraction (φ_f) was <5%, and then reduced slightly with an increase of φ_f. In addition, the melt shear flow obeyed roughly power law under the experimental conditions, and the influence of particle size on the temperature sensitivity of the melt shear viscosity is insignificant at low filler concentration.

Keywords

polypropylene diatomite composite melt volume flow rate.

References

Hristov, V. , Krumova, M. and Michler, G. ( 2006). The Influence of Excess Coupling Agent on the Microdeformation Processes and Mechanical Properties of Poly(Propylene)/ Wood-Flour Composites . Macromol. Mater. Eng., 291(6): 677-683.

Weon, J.I. and Sue, H.J. ( 2006). Mechanical Properties of Talc- and CaCO3-reinforced High-crystallinity Polypropylene Composites, J. Mater. Sci., 41(8): 2291-2300.

Pukanszky, B. and Moczo, J. (2004). Morphology and Properties of Particulate Filled Polymers, Macromol. Symps., 214: 115-134.

Liang, J.Z. and Li, R.K.Y. ( 1999). Tensile Properties and Morphology of PP/EPDM/Glass Bead Ternary Composites, Polym. Compos., 20: 413-422.

Lu, S. , Yan, L. , Zhu, X. and Qi, Z. ( 1992). Microdamage and Interfacial Adhesion in Glass Bead-filled High-density Polyethylene, J. Mater. Sci., 27: 4633-4638.

Meddad, A. and Fisa, B. ( 1997). A Model for Filler-Matrix Debonding in Glass-Bead-filled Viscoelastic Polymer, J. Appl. Polym. Sci., 65: 2013-2024.

Rungruang, P. , Grady, B.P. and Supaphol, P. (2006). Surface-modified Calcium Carbonate Particles by Admicellar Polymerization to be Used as Filler for Isotactic Polypropylene, Coll. Surf. A-Phys. Eng. Aspec., 275(1-3): 114-125.

Avella, M. , Cosco, S. , Di Lorenzo, M.L. , Errico, M.E. and Gentile, G. ( 2006). iPP Based Nanocomposites Filled with Calcium Carbonate Nanoparticles: Structure/Properties Relationships, Macromol. Sympos., 234: 156-162.

Hui, C.Y. and Shia, D. (1998). Simple Formulate for the Effective Moduli of Unidirectional Aligned Composites, Polym. Eng. Sci., 38: 774-782.

10.

Santos, M.A. , Maliska, A.M. , Klein, A.N. , Ristow, W. and Muzart, J.L.R. (2005). Debinding of Injected Parts Using an Abnormal Glow Discharge, Mater. Sci. Eng. Part A, 407(1-2): 71-76.

11.

Tang, G.Q. and Kovscek, A.R. ( 2004). An Experimental Investigation of the Effect of Temperature on Recovery of Heavy Oil from Diatomite, SPE J., 9(2): 163-165.

12.

Urkov, A.L. and Aksel’rod, L.M. ( 2005). Properties of Heat-insulating Materials, Refract. Indust. Ceram., 46(3): 170-174.

13.

Hong, Z.S. , Tateishi, Y. and Han, J. ( 2006). Experimental Study of Macro- and Microbehavior of Natural Diatomite, J. Geotec. Geoen. Eng., 132(5): 603-610.

14.

Liang, J.Z. ( 2001). The Melt Flow Properties of Polypropylene/Glass Bead Composites, Macromol. Mater. Sci. Eng., 286: 714-718.

15.

Liang, J.Z. ( 2002). Melt Rheology Of Nanometre-Calcium-Carbonate-filled Acrylonitrile-Butadiene-Styrene (ABS) Copolymer Composites during Capillary Extrusion, Polym. Int., 51(12): 1473-1478.

16.

Liang, J.Z. ( 2006). Effects of Particle Size on Melt Viscoelastic Properties During Capillary Extrusion of Glass Bead-filled LDPE Composites, J. Therm. Comp. Mater., 19(6): 703-713.