Fabrication and Characterization of High-density Polyethylene - Coconut Coir Composites with Stearic Acid as Compatibilizer

Abstract

Composites of high-density polyethylene (HDPE) with coconut coir as the fiber and stearic acid (SA) as the coupling agent were fabricated by compression molding. Coconut coir in the form of braided fibers and whiskers were used for the study. Incorporation of the coir, buckled the composites and decreased their tensile strength and elongation at break. The extent of buckling and deterioration in the mechanical properties was proportional to the amount of coir loaded as filler. Treatment of the coir with SA as the coupling agent enhanced the mechanical properties and the thermal stability of the composites. It also reduced the extent of buckling and prevented aging of the composites to certain extent in aqueous and strong acidic and alkaline media. Scanning electron micrographs of the fractured samples showed improved adhesion between coir and HDPE matrix upon treatment with SA.

Keywords

coconut coir high-density polyethylene stearic acid compatibilizer coupling agent composite.

References

Pradhan, S.K. , Dwarakadasa, E.S. and Reucroft, P.J. (2004). Processing And Characterization of Coconut Shell Powder Filled UHMWPE, Materials Science and Engineering A, 367: 57-62.

Georgopoulos, S.Th. , Tarantili, P.A. , Avgerinos, E. , Andreopoulos, A.G. and Koukios E.G. ( 2005). Thermoplastic Polymers Reinforced with Fibrous Agricultural Residues, Polymer Degradation and Stability, 90: 303-312.

Brahmakumar, M. , Pavithran, C. and Pillai, R.M. (2005). Coconut Fibre Reinforced Polyethylene Composites: Effect of Natural Waxy Surface Layer of the Fibre on Fibre/ Matrix Interfacial Bonding and Strength of Composites , Composites Science and Technology, 65(3,4): 563-569.

Albano, C. , Karam, A. , Domiánguez, N. , Saánchez, Y. , Gonzaález, J. , Aguirre, O. and Catano, L. ( 2005). Thermal, Mechanical, Morphological, Thermogravimetric, Rheological and Toxicological Behavior of HDPE/Seaweed Residues Composites , Composite Structures, 71: 282-288.

Lu, J.Z. , Qinglin, W.U. and Mcnabb, H.S. (2008). Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments , Wood and Fiber Science, 32: 88-104.

Yang, H.S. , Wolcott, M.P. , Kim, H.S. , Kim, S. and Kim, H.J. ( 2007). Effect of Different Compatibilizing Agents on the Mechanical Properties of Lignocellulosic Material Filled Polyethylene Bio-composites , Composite Structures, 79: 369-375.

Mani, P. and Satyanarayan, K.G. ( 1990). Effects of the surface Treatments of Lignocellulosic Fibers on Their Debonding Stress, Journal of Adhesion Science Technology, 37(4): 451-468.

Jayaraman, K. and Bhattacharyya , D. (2004). Mechanical Performance of Woodfibre-waste Plastic Composite Materials, Resources, Conservation and Recycling, 41: 307-319.

Raj, R.G. , Kokta, B.V. , Grouleau, G. and Daneault, C. (1990). The Influence of Coupling Agents on Mechanical Properties of Composites Containing Cellulosic Fillers , Polymer-plastics Technology and Engineering , 29(4): 339-353.

10.

Lee, S.Y. , Yang, H.S. , Kim , H.J. , Jeong, C.S. , Lim , B.S. and Lee , J.N. (2004). Creep Behavior and Manufacturing Parameters of Wood Flour Filled Polypropylene Composites, Composite Structures, 65(3,4): 459-469.

11.

Habibia, Y. , Waleed, K. , El-Zawawy , W.K. , Maha, M. , Ibrahim, M.M. and Dufresne, A. (2008). Processing and Characterization of Reinforced Polyethylene Composites made with Lignocellulosic Fibers from Egyptian Agro-industrial Residues, Composites Science and Technology, 68(7,8): 1877-1885.

12.

Kim, H. , Biswas, J. and Choe, S. ( 2006). Effects of Stearic Acid Coating on Zeolite in LDPE, LLDPE, and HDPE Composites, Polymer, 47(11): 3981-3992.

13.

Osman, M.A. , Atallah, A. , Ulric, W. and Suter, U.W. ( 2004). Influence of Excessive Filler Coating on the Tensile Properties of LDPE-Calcium Carbonate Composites , Polymer, 45(4): 1177-1183.

14.

Bellayer, S. , Tavard, E. , Duquesne, S. , Piechaczyk, A. and Bourbigot, S. ( 2009). Mechanism of Intumescence of a Polyethylene/Calcium Carbonate/Stearic Acid System, Polymer Degradation and Stability, 94(5): 797-803.

15.

Sindhu, K. , Joseph, K. , Joseph, J.M. and Mathew, T.V. ( 2007). Degradation Studies of Coir Fiber/Polyester and Glass Fiber/Polyester Composites Under Different Conditions, Journal of Reinforced Plastics and Composites, 26: 1571-1585.