Effect of Organo-modified Layered Silicates on the Properties of Poly(Methyl Methacrylate) Nanocomposites

Abstract

Poly(methyl methacrylate) (PMMA)/layered silicate nanocomposites were prepared using melt intercalation technique. Commercially modified nanoclays such as Cloisite 30B (C30B), Cloisite 20A (C20A), and Bentone 109 (B109) have been used as organoclays for the preparation of nanocomposites. PMMA matrix has been grafted with maleic anhydride to modify the interfacial region and improve the interfacial adhesion between organoclays and PMMA matrix. Mechanical tests revealed an increase in the tensile modulus of PMMA/C30B (5%) nanocomposite to about 35% as compared to virgin PMMA matrix. Thermal measurements employing differential scanning calorimetry and thermogravimetric analysis also showed improved thermal stability and marginal increase in T_g of PMMA matrix with the incorporation of nanoclays. Wide angle X-ray diffractograms revealed an increase in d-spacing of C30B nanoclay from 18.5 to 39.4 Å in PMMA/C30B nanocomposites, thus confirming intercalated structure. The dispersion characteristics of organoclay within PMMA matrix was also investigated using transmission electron microscopy. Furthermore, dynamic mechanical analysis shows a substantial increase in storage modulus of PMMA matrix with the incorporation of organoclays. Additionally, an improved fire retardancy of PMMA was also observed in PMMA/B109 (5 wt%) nanocomposites with an evidence of reduced horizontal rate of burning.

Keywords

PMMA Cloisite 30B Bentone 109 nanocomposites DMA.

References

Ray, S.S. and Okamoto, M. (2003). Polymer-layered Silicates Nanocomposites, Prog. Polym. Sci., 28: 1539-1641.

Kojima, Y. , Usuki, A. , Kawasumi, M. , Okada, A. , Fukushima, Y. and Kurauchi, T. ( 1993). Mechanical Properties of Nylon-6 Clay Hybrids, J. Mater. Res., 8: 1185.

Okada, A. , Kawasumi, M. , Usuki, A. , Kojima, Y. , Kurauchi, T. and Kamigaito, O. ( 1990). Synthesis and Properties of Nylon-6/Clay Hybrids, In: MRS Symposium Proceeding, Canada, Vol. 171, pp. 45-50.

Krishnamoorti, R. , Vaia, R.A. and Giannelis , E.P. (1996). Structure and Dynamics of Polymer Layer Silicates Nanocomposites, Chem. Mater., 8: 1728-1734.

Giannelis, E.P. , Krishnamoorti, R. and Manias, E. (1999). Polymer Layer Silicates Nanocomposites Models System for Confined Polymer, Adv. Polym. Sci., 138: 107-147.

LeBaron, P.C. , Wang, Z. and Pinnavaia, T.J. (1999). Polymer Layer Silicates Nanocomposites An Over View, Appl. Clay Sci., 15: 11-29.

Vaia, R.A. , Price, G. , Ruth, P.N. , Nguyen, H.T. and Lichtenhan, J. ( 1999). Polymer Layered Silicate Nanocomposites as High Performance Ablative Materials, Appl. Clay Sci., 15: 67-92.

Biswas, M. and Sinha Ray, S. ( 2001). Recent Progress in Synthesis and Evaluation of Polymer Montmorillonite Nanocomposites, Adv. Polym. Sci., 155: 167-221.

Giannelis, E.P. (1998). Polymer Layer Silicate Nanocomposites: Synthesis, Properties and Application, Appl. Organomet. Chem., 12: 675-680.

10.

Xu, R. , Manias, E. , Synder, A.J. and Runt, J. ( 2001). New Biomedical Polymer Layered Silicates Nanocomposites , Macromolecules, 34: 337.

11.

Bharadwaj, R.K. (2001). Modelling the Barrier Properties of Polymer Layered Silicates Nanocomposites, Macromolecules , 34: 1989.

12.

Messersmith, P.B. and Giannelis , E.P. (1995). Synthesis and Barrier Properties of Poly (1-Caprolactone) Layered Silicates Nanocomposites, J. Polym. Sci., Part A: Polym. Chem., 33: 1047.

13.

Yano, K. , Usuki, A. , Okada, A. , Kurauchi, T. and Kamigaito, O. ( 1993). Synthesis and Properties of Polyimides - Clay Hybrid , J. Polym. Sci., Part A: Polym. Chem., 31: 2493-2498.

14.

Kojima, Y. , Usuki, A. , Kawasumi, M. , Fukushima, Y. , Okada, A. , Kurauchi, T. and Kamigaito, O. ( 1993). Mechanical Properties of Nylon 6 Clay Hybrid, J. Mater. Res., 8: 1179.

15.

Gilman, J.W. , Kashiwagi, T. and Lichtenhan, J.D. ( 1997). Nanocomposites: A Revolutionary New Flame Retardant Approach , SAMPE J., 33: 40-46.

16.

Ciullo, P.A. ( 1996). White Bentonite - A Bright Future, In: Kendall, T. (ed.), Industrial Clays. An Industrial Minerals Special Review, 2nd edn, pp. 18-22, Argentina.

17.

Lee, J.F. , Mortland, M.M. , Chiou, C.T. , Kile, D.E. and Boyd, A. (1990). Adsorption of Benzene, Toluene and Xylene by Two Tetramethylammonium-Smectites Having Different Charge Densities, Clays Clay Miner., 38: 113-120.

18.

Colin, C.H. and Murray, H.H. (1997). Industrial Clays in the 21st Century: A Perspective of Exploration, Technology and Utilization . Appl. Clay Sci., 11: 285-310.

19.

Patel, H.A. , Somani, R.S. , Bajaj, H.C. and Jasra, R.V. (2006). Nanoclays for Polymer Nanocomposites, Paints, Inks, Greases and Cosmetic Formulations, Drug Delivery Vehicle and Wastewater Treatment, Bull. Mater. Sci., 29: 133-145.

20.

Brindly, S.W. and Brown, G. (1980). Crystal Structure of Clay Minerals and their X-Ray Diffraction, Mineralogical Society, London.

21.

Blumstein, A. (1965). Polymerisation of Adsorbed Monolayer: II. Thermal Degradation of the Inserted Polymers, J. Polym. Sci. Part A, 3: 2665-2671.

22.

Blumstein, A. (1965). Polymerization of Adsorbed Nanolayers II, Thermal Degradation of the Inserted Polymers, J. Polym. Sci. Part A: Gen pap, 3: 2653-2664.

23.

Wang, D. , Zhu, J. , Yao, Q. and Wilkie, C.A. ( 2002). A Comparison of Various Methods for the Preparation of Polystyrene and Poly (Methyl Methacrylate) - Clay Composite, Chem. Mater., 14: 3837-3841.

24.

Bandyopadhyay, S. , Giannelis, E.P. and Hsieh, A.J. (2000). Thermal and Thermomechanical Properties of PMMA Nanocomposites, Polymer, 82: 208-212.

25.

Bandyopadhyay , S. , Hsieh, A.J. and Giannellis , E.P. (2001). PMMA Nanocomposites Synthesized by Emulsion Polymerization, In: Polymer Nanocomposites, ACS Symposium Series, Ch. 3, ACS Publications, pp. 15-25.

26.

Salahuddin, N. and Shehata, M. (2001). Polymethyl Methacrylate-Montmorillonite Composites; Preparation Characterization and Properties, Polymer, 42: 8379-8383.

27.

Su, S. and Wilkie, C.A. ( 2003). Exfoliated Poly(Methyl Methacrylate) and Polystyrene Nanocomposites Occur when the Clay Cations Contain a Vinyl Monomer, J. Polym. Sci., Part A: Polym. Chem., 41: 1124-1132.

28.

Lee, D.C. and Jang, L.W. (1996). Synthesis and Rheology of Intercalated Polystyrene/ Na+-MMT Nanocomposite, J. Appl. Polym. Sci., 61: 1117-1123.

29.

Huang, X. and Brittain, W.J. ( 2001). Synthesis and Characterization of PMMA Nanocomposites by Suspension and Emulsion Polymerization, Macromolecules , 34: 3255-3263.

30.

Kumar, S. and Jog, J.P. ( 2003). Preparation and Characterization of Poly(Methyl Methacrylate) - Clay Nanocomposites via Melt Intercalation: The Effect of Organoclay on the Structure and Thermal Properties, J. Appl. Polym. Sci. , 89: 1186-1191.

31.

Hwu, J.M. , Jiang, G.J. , Gao, Z.M. , Xie, W. and Pan, W.P. (2002). Synthesis and Properties of Polystyrene-MMT Nanocomposite by Suspension Polymerization, J. Appl. Polym. Sci., 83: 1702-1708.

32.

Brandrup, J. and Immergut, E.H. ( 1989). Polymer Handbook, 3rd edn, Wiley Interscience, New York.

33.

Anastasiadis, S.H. , Karatasos, K. , Vlachos, G. , Manias, E. and Giannelis, E.P. (2000). Nanoscopic-Confinement Effects on Local Dynamics, Phys. Rev. Lett., 84: 915-918.

34.

Zeng, C. and Lee, L.J. ( 2001). Three Dimensional Assembly of Polymer Microstructures at Low Temperatures, Macromolecules, 34: 4098-4130.

35.

Inaba, A. , Kashiwagi, T. and Brown, E.J. ( 1988). Effects of Initial Molecular Weight on Thermal Degradation of Poly(Methyl Methacrylate). Part 1. Model 1, Polym. Degrad. Stab., 21: 1-20.

36.

Kashiwagi, T. and Inaba, A. (1989). Behavior of Primary Radicals During Thermal Degradation of Poly(Methyl Methacrylate), Polym. Degrad. Stab., 26: 161-184.

37.

Manring, L. ( 1991). Thermal Degradation of Poly(Methyl Methacrylate). Random Side-Group Scission, Macromolecules, 24: 3304-3309.

38.

Costache, M.C. , Wang, D. , Heidecker, M.J. , Manias, E. and Wilkie, C.A. (2006). Polym. Adv. Technol., 17: 272-280.

39.

Kashiwagi, T. , Inaba, A. and Brown, E.J. (1986). Effects of Weak Linkages on the Thermal and Oxidative Degradation of Poly(Methyl Methacrylate) Nanocomposites , Macromolecules, 19: 2160-2171.

40.

Mc Neill, I.C. (1968). A Study of the Thermal Degradation of Methylmethacrylate Polymers and Copolymers by Thermal Volatilization Analysis, Eur. Polym. J., 4: 21-30.

41.

Zhu, J. , Start, P. , Mauritz, K.A. and Wilkie, C.A. (2002). Thermal Stability and Flame Retardancy of Poly(Methyl Metrhacrylate)-Claynanocomposites, Polym. Degrad. Stab., 77: 253-258.

42.

Jash, P. and Wilkie, C.A. ( 2005). Effects of Surfactants on the Thermal and Fire Properties of Poly(Methyl Methacrylate)/Class Nanocomposites, Polym. Degrad. Stab., 88: 401-406.

43.

Wang, D. , Zhu, J. , Yao, Q. and Wilkie, C.A. ( 2002). A Comparison of Various Methods for the Preparation of Polystyrene and Poly(Methyl Methacrylate) Clay Nanocomposites, Chem. Mater., 14: 3837-3843.

44.

Chen, W. , Feng, L. and Qu, B. ( 2004). In Situ Synthesis of Poly(Methylmethacrylate)/ MgAl Layered Double Hydroxide Nanocomposites with High Transparency and Enhanced Thermal Properties, Solid State Commun., 130: 259-263.

45.

Park, S.J. , Cho, M.S. , Lim, S.T. , Choi, H.J. and Jhon, M.S. ( 2003). Synthesis and Dispersion Characteristics of Multi-Walled Carbon Nanotubecomposites With Poly(Methyl Methacrylate) Prepared by In Situ Bulk Polymerization, Macromol. Rapid Commun., 24: 1070-1073.

46.

Gilman, J.W. , Kashiwagi, T. , Nyden, M. , Brown, J.E.T. , Jackson, C.L. , Lomakin, S. , Gianellis, E.P. and Manias, E. ( 1998). Flammability Studies of Polymer Layered Silicate Nanocomposites: Polyolefin, Epoxy and Vinyl Ester Resins, In: Al-Maliaka, S. , Golovoy, A. and Wilkie, C.A. (eds), Chemistry and Technology of Polymer Additives, pp. 249-265, Blackwell Scientific, London.

47.

Su, S. , Jiang, D.D. and Wilkie, C.A. ( 2004). Polybutadiene-modified Clay and its Polystyrene Nanocomposites , J. Vinyl Add. Technol., 10: 44-51.

48.

Gilman, J.W. , Jackson, C.L. , Morgan, A.B. , Harris, R. , Manias, E. , Giannelis, E.P. , Wuthenow, M. , Hilton, D. and Phillips, S.H. (2000). Flammability Properties of Polymer Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites, Chem. Mater., 12: 1866-1873.

49.

Zhu, J. , Uhl, F.M. , Morgan, A.B. and Wilkie, C.A. (2001). Studies on the Mechanism by Which the Formation of Nanocomposites Enhances Thermal Stability, Chem. Mater., 13: 4649-4654.

50.

Tiwari, R.R. and Upendra, N. ( 2007). Influence of Organic Modifications on Mechanical Properties Melt Processed Intercalated Poly(Methyl Methacrylate) Organo Clay Nanocomposites, J Appl. Polym. Sci., 105: 2433-2438.

51.

Stretz, H.A. , Paul, D.R. , Li, R. , Keskkula, H. and Cassidy, P.E. ( 2004). Intercalation and Exfoliation Relationships in Melt Processed Poly(Styrene-Co-Acrylonitrile)/MMT Nanocomposites, Polymer , 45(12): 4051-4061.

52.

Zannetti, M. , Camino, G. , Reichert, P. and Mulhaupt, R. ( 2001). Thermal Behaviour of Poly (Propylene) Layered Silicates Nanocomposites, Macromol. Rapid Commun., 22: 176-180.

53.

Zhu, J. , Uhl, F. , Morgan, A.B. and Wilkie, C.A. ( 2001). Studies on the Mechanism by Which the Formation of Nanocomposites Enhances Thermal Stability, Chem. Mater., 13: 4649-4654.