Effects of Mica and Fly Ash Concentration on the Properties of Polyester Thermoplastic Elastomer Composites

Abstract

Particle-filled polymer composites are becoming attractive because of their wide applications and low cost. In this study, the effects of fillers such as mica and fly ash, at varying concentrations, on the mechanical, thermal, electrical, rheological, and morphological properties of polyester thermoplastic elastomer (Hytrel^®) were investigated. Composites of Hytrel^® with varying concentrations (5—40 wt%) of mica and fly ash were prepared by twin screw extrusion. Mechanical properties, such as flexural strength and modulus, were found to increase with filler concentration. Mica showed a moderate increase in tensile strength with low concentrations, whereas the strength decreased with fly ash concentration. Thermal and electrical properties of the composites were found to increase with filler concentration. Morphological studies revealed that there was a good dispersion of filler in the polymer matrix at lower concentrations.

Keywords

mica fly ash rheological properties mechanical properties.

References

Katz, H.S. and Milevski, J.V. ( 1978). Handbook of Fillers and Reinforcements for Plastics , Vol. 1, 1st edn, pp. 333-457, Van Notrand Reinhold, New York.

Unal, H. and Findik, F. ( 2003). Mechanical Behavior of Nylon Composites Containing Talc and Kaolin, J. Appl. Polym. Sci., 88: 1694-1697.

Walker, B.M. (ed.) ( 1979 ). Polyester Thermoplastic Elastomer, In: Handbook of Thermoplastic Elastomer, 1st edn, Vol. 1, pp. 103-118, Litton Education Publishing, New York.

Kaforglou, N.K. (1977). Thermomechanical Studies of Semicrystalline Polyether-Ester Copolymers, J. Appl. Polym. Sci., 21: 543-554.

Nagai, Y. , Ogawa, T. and Zhen, LY ( 1997). Analysis of Weathering of Thermoplastic Elastomers, Polym . Degrad. Stab., 56: 115-121.

Aso, O. , Eguiazabal, J.I. and Nazabal, J. ( 2007). The Influence of Surface Modification on the Structure and Properties of a Nanosilica Filled Thermoplastic Elastomer, Compos. Sci. Technol., 67: 2854-2863.

George, W. (ed.) (1999). Mica , In: Handbook of Fillers, 2nd edn, Vol. 1, pp. 112-115, Chem Tech Publishing , Toronto, New York.

Baral, D. , De, P.P. and Nando, G.B. ( 1999). Thermal Characterisation of Mica Filled Thermoplastic Polyurethane Composites, Polym. Degrad. Stab., 65: 47-51.

Pinto, U.A. and Visconte, L. LY. ( 2001). Mechanical Properties of Thermoplastic Polyurethane Elastomer with Mica and Aluminium Trihydrate, Eur. Polym. J., 37: 1935-1937.

10.

Gan, D. , Lu, S. , Song , C. and Wang, S. (2001). Mechanical Properties and Frictional Behavior of Mica Filled Poly(aryl ether ketone) Composites, Eur. Polym. J., 37: 1359-1365.

11.

Song, C. , Wang, S. , Gan, D. and Lu, S. ( 2001). Physical Properties of Poly(ether ketone ketone)/Mica Composites, Mater. Lett., 48: 299-302.

12.

Pastorini, M.T. and Nunes, R.C.R. (1999). Mica as a Filler for ABS/Polycarbonate Blends, J. Appl. Polym. Sci., 74: 1361-1365.

13.

Xuang, X. , Hwang, J.Y. and Gillis, J.M. ( 2003). Processed Low NOx Fly Ash as a Filler in Plastics , J. Miner. Mater. Charact. Eng., 2(1): 11-31.

14.

Fen. Y.Y. and Sheng, G.G. (2006). Surface Modification of Purified Fly Ash and Application in Polymer, J. Hazard. Mater., 133: 276-282.

15.

Bose, S. and Mahanwar, P.A. ( 2004). Effect of Flyash on the Mechanical, Thermal, Dielectric, Rheological and Morphological Properties of Filled Nylon-6, J. Miner. Mater. Charact. Eng., 3(1): 23-31.

16.

Soyama, M. and Inoue, K. ( 2007). Flame Retardancy of Polycarbonate Enhanced by Adding Fly Ash, Polym. Adv. Technol., 18: 386-391.

17.

Menon, A.R.R. and Sonia, T.A. (2006). Studies on Fly-Ash-Filled Natural Rubber Modified with Cardanol Derivatives, J. Appl. Polym. Sci., 102: 4801-4808.

18.

Li, Y. and White, D.J. ( 1998). Composite Material from Fly Ash and Post-consumer PET , Res. Conserv. Recycl., 24: 87-93.

19.

Joshi, A.D. (1993). TPO vs PVC for automotive interior, J. Coat. Fabr., 23: 67-73.

20.

Parister, L.M. (1983). Copolyester: The Fuel Resistant Thermoplastic Elastomer, J. Elastomers Plast., 15: 146-158.

21.

He, D. and Jiang, B. ( 1993). The Elastic Modulus of Filled Polymer Composites , J. Appl. Polym. Sci., 49: 617-621.

22.

Bose, S. and Mahanwar, P.A. ( 2004). Effect of Particle Size of Filler on Properties of Nylon-6 , J. Miner. Mater. Charact. Eng., 3(1): 23-31.

23.

Leong, Y.W. , Mohd. Ishak, Z.A. and Ariffin, A. ( 2004). Mechanical and Thermal Properties of Talc and Calcium Carbonate Filled Polypropylene Hybrid Composites , J. Appl. Polym. Sci., 91: 3327-3336.

24.

Gahleitener, M. and Neibl, W. (1994). Correlation Between Rheological and Mechanical Properties of Mineral Filled Polypropylene Composites, J. Appl. Polym. Sci., 53: 283-289.