Effect of inhomogeneous temperature distribution on the impregnation process of the continuous compression molding technology

Abstract

The demand for continuous fiber-reinforced thermoplastics has steadily increased during the last years due to their specific properties. But considering the applications in large-scale production, the price for the organic sheets is still too high in order to compete with the metal counterparts. A starting point for the reduction of the total costs is the acceleration of the impregnation process by in-plane polymer flow. For this reason, this scientific report provides an insight into the production process using a continuous compression molding machine. In order to analyze the in-plane polymer flow and its driving forces, a method for the evaluation of the pressure distribution is presented in a first step. The examination revealed a significant inhomogeneous pressure distribution for the whole pressing area, which could be affected by different temperature settings. Afterward, the impregnation quality was correlated with the different settings, followed by the illustration of a huge potential for increasing the impregnation speed.

Keywords

Thermoplastic polymer impregnation continuous compression molding polymer flow

Get full access to this article

View all access options for this article.

References

Greco

Musardo

Maffezzoli

. Flexural creep behaviour of PP matrix woven composite. Compos Sci Technol 2007; 67(25): 1148–1158.

Mitschang

Blinzler

Wöginger

. Processing technologies for continuous fibre reinforced thermoplastics with novel polymerblends. Compos Sci Technol 2003; 63(14): 2099–2110.

Dube

Batch

Vogel

. Reaction injection pultrusion of thermoplastic and thermoset composites. Polym Compos 1995; 16(5): 378–385.

Luisier

Bourban

P-E

Manson

J-AE

. Reactive injection pultrusion of PA12 composites: process and modeling. Compos A 2003; 34: 583–595.

Steeg

. Prozesstechnologie für cyclic butylene terephtalate im faser-kunststoff-verbund. Kaiserslautern: Schriftenreihe Institut für Verbundwerkstoffe GmbH, 2010.

Gebart

. Permeability of unidirectional reinforcements for RTM. J Compos Mater 1992; 26(8): 1100–1133.

Chang

Hourng

. Numerical simulation of the transverse impregnation in resin transfer molding. J Reinforc Plast Compos 1998; 17(2): 165–182.

Van West

Byron Pipes

Advani

. The consolidation of commingles thermoplastic fabrics. Polym Compos 1991; 12(6): 417–427.

Gibson

Manson

JAE

. Impregnation technology for thermoplastic matrix composites. Compos Manufac 1992; 3(4): 223–233.

10.

Mayer

Wang

Neitzel

. Macro- and micro-impregnation phenomena in continuous manufacturing of fabric reinforced thermoplastic composites. Compos A 1998; 29A: 783–793.

11.

Bernet

Michaud

Bourban

. An impregnation model for the consolidation of thermoplastic composites made from commingled yarns. J Compos Mater 1999; 33(8): 751–772.

12.

Michaud

Manson

JAE

. Impregnation of compressible fiber mats with a thermoplastic resin. Part I: theory. J Compos Mater 2001; 35(13): 1150–1173.

13.

Gibson

Månson

. Impregnation technology for thermoplastic matrix composites. Compos Manufac 1992; 3(4): 223–233.

14.

Gutowski

Cai

Bauer

. Consolidation experiments for laminate composites. J Compos Mater 1987; 21: 650–669.

15.

Gennaro

Greco

Maffezzoli

. Micro-and macro-impregnation of fabrics using thermoplastic matrices. J Thermoplast Compos Mater 2013; 26(4): 527–543.

16.

Peltronen

Lahteenkorva

Paakkonen

. The influence of melt impregnation parameters on the degree of impregnation of a polypropylen/glass fibre prepreg. J Thermoplast Compos Mater 1992; 5(4): 318–343.

17.

Nygard

Gustafson

. Continuous glass fiber-polypropylene composites made by melt impregnation: influence of processing method. J Thermoplast Compos Mater 2004; 17(2): 167–184.

18.

Gong

. Influence of non-homogeneous fiber preform and mold shape on resin impregnation characteristics. Journal of Thermoplastic Composite Materials 1992; 5(1): 76–88.

19.

Gardiner

. Aerospace-grade compression molding. High-Performance Composites 2010; 7: 34–40.

20.

Pantelakis

Baxevani

Spelz

. An automated technique for manufacturing thermoplastic stringers in continuous length. Compos Struct 1993; 26: 115–121.

21.

Spelz

Schulze

. Intervall-Heißpressverfahren. Kunststoffe 1995; 85(5): 665–668.

22.

Wang

Mayer

Neitzel

. Some issues on impregnation in manufacturing of thermoplastic composites by using a double belt press. Polym Compos 1997; 18(6): 701–710.

23.

Christmann

Mitschang

. Influence of inhomogeneous tool temperature on the impregnation pressure of the continuous compression molding process. In: Proceedings of 18th ICCM, Jeju Island, Korea, 21–26 August 2011.