The widespread use of petroleum-based polymers raises environmental concerns due to their non-biodegradability and their retention in ecosystems. Developing sustainable alternatives that balance functionality and eco-friendliness is, therefore, critical. In this study, coconut shell powder (CSP), an abundant agricultural by-product, was employed to fabricate a self-binding, coating-free biocomposite via acetic acid pre-treatment and a simple thermal moulding process. Pre-treatment of CSP with 20 vol% acetic acid effectively loosened the lignocellulosic matrix, enabling reshaping of CSP under thermal compaction at 16 MPa and 150°C for 30 minutes, resulting in intrinsic binding and the in situ formation of a protective carbonised surface layer. Smaller particle sizes further enhanced densification. Under optimised processing parameters, the composite exhibited a maximum compressive strength of 78 N/mm2 with a compressive modulus of 1378 MPa. The surface had an average Vickers hardness of 42 HV20. Furthermore, after immersing in water for 24 hours, water absorption plateaued at around 4%. The resulting external binder and coating-free biocomposite shows potential as a sustainable substitute for plastics.
GeyerR. Production, use, and fate of synthetic polymers. In: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions. Elsevier, 2020, pp. 13–32. https://doi.org/10.1016/B978-0-12-817880-5.00002-5
3.
SharmaSSarangiPKSahooAK. Polymer materials in daily life: classification, applications, recent developments, and future prospects. Macromol Symp2025; 414(1): 2400159. https://doi.org/10.1002/masy.202400159
4.
RajmohanKVSRamyaCRaja ViswanathanM, et al.Plastic pollutants: effective waste management for pollution control and abatement. Elsevier B.V., 2019. https://doi.org/10.1016/j.coesh.2019.08.006
ChaeYAnYJ. Current research trends on plastic pollution and ecological impacts on the soil ecosystem: a review. Elsevier Ltd., 2018. https://doi.org/10.1016/j.envpol.2018.05.008
7.
PivnenkoKJakobsenLGEriksenMK, et al.Challenges in plastics recycling. CISA Publisher, 2024.
8.
KhalidMYArifZUAhmedW, et al.Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials. Sustain Mater Technol2022; 31: e00382. https://doi.org/10.1016/J.SUSMAT.2021.E00382
9.
MangalMRaoCVBanerjeeT. Bioplastic: an eco-friendly alternative to non-biodegradable plastic. John Wiley and Sons Ltd, 2023. https://doi.org/10.1002/pi.6555
10.
WaniWAPathanSBoseS. The journey of alternative and sustainable substitutes for ‘Single-Use’ plastics. Adv Sustain Syst2021; 5(12): 2100085. https://doi.org/10.1002/adsu.202100085
11.
AndrewJJDhakalHN. Sustainable biobased composites for advanced applications: recent trends and future opportunities – a critical review. Elsevier B.V., 2022. https://doi.org/10.1016/j.jcomc.2021.100220
12.
FerrariFStrianiRFicoD, et al.An overview on wood waste valorization as biopolymers and biocomposites: definition, classification, production, properties and applications. MDPI, 2022. https://doi.org/10.3390/polym14245519
DayoAQGaoBWangJ, et al.Natural hemp fiber reinforced polybenzoxazine composites: curing behavior, mechanical and thermal properties. Compos Sci Technol2017; 144: 114–124. https://doi.org/10.1016/j.compscitech.2017.03.024
15.
SamantaPSamantaAMontanariC, et al.Fire-retardant and transparent wood biocomposite based on commercial thermoset. Compos. Part A Appl. Sci. Manuf2022; 156: 106863. https://doi.org/10.1016/j.compositesa.2022.106863
16.
AhmadMNPuasaMN. Mechanical and thermal properties of coconut (cocos nucifera)-reinforced polypropylene composite. Eng2025; 6(11): 299. https://doi.org/10.3390/eng6110299
17.
WuzellaGMahendranARBätgeT, et al.Novel, binder-free fiber reinforced composites based on a renewable resource from the reed-like plant Typha sp. Ind Crops Prod2011; 33(3): 683–689. https://doi.org/10.1016/j.indcrop.2011.01.008
18.
NadzriSSultanMShahA, et al. A comprehensive review of coconut shell powder composites: preparation, processing, and characterization. Sage Publications Ltd, 2022. https://doi.org/10.1177/0892705720930808
LisperguerJPerezPUrizarS. Structure and thermal properties of lignins: characterization by infrared spectroscopy and differential scanning calorimetry. J. Chil. Chem. Soc., 2009.
21.
FarinaACocitoPBorettoG. Flow in deformable porous media: modelling and simulations of compression moulding processes. Elsevier Science Ltd., 1997.
22.
UfitikireziJFilipMGhorbaniM, et al. “Agricultural Waste Valorization: exploring Environmentally Friendly Approaches to Bioenergy Conversion”. Multidisciplinary Digital Publishing Institute (MDPI), 2024. https://doi.org/10.3390/su16093617
23.
ChenHFerrariCAngiuliM, et al.Qualitative and quantitative analysis of wood samples by fourier transform infrared spectroscopy and multivariate analysis. Carbohydr Polym2010; 82(3): 772–778. https://doi.org/10.1016/j.carbpol.2010.05.052
24.
Javier-AsteteRJimenez-DavalosJZollaG. Determination of hemicellulose, cellulose, holocellulose and lignin content using FTIR in Calycophyllum spruceanum (benth.) K. Schum. And Guazuma crinita lam. PLoS One2021; 16(10): e0256559. https://doi.org/10.1371/journal.pone.0256559
25.
AbderrahimBAbderrahmanEMohamedA, et al.Kinetic thermal degradation of cellulose, polybutylene succinate and a green composite: comparative study. World Journal of Environmental Engineering2015; 3(4): 95–110. https://doi.org/10.12691/wjee-3-4-1
26.
MauryaDPSinglaANegiS. An overview of key pretreatment processes for biological conversion of lignocellulosic biomass to bioethanol. Springer Verlag, 2015. https://doi.org/10.1007/s13205-015-0279-4
27.
YangWWangCCWangL, et al.Hydrolysis kinetics and structure characterization of ball milled bamboo impregnated with various diluted acids. J Supercrit Fluids2025; 224: 106648. https://doi.org/10.1016/j.supflu.2025.106648
28.
SchmierSHosodaNSpeckT. Hierarchical structure of the Cocos nucifera (coconut) endocarp: functional morphology and its influence on fracture toughness. Molecules2020; 25(1). https://doi.org/10.3390/molecules25010223
29.
ZhengGYeHLiangY, et al.Pre-treatment of natural bamboo for use as a high-performance bio-composites via acetic acid ball milling technology. Constr Build Mater2023; 367: 130350. https://doi.org/10.1016/j.conbuildmat.2023.130350
30.
XuLHMaCYZhangC, et al.An integrated acetic acid-catalyzed hydrothermal-pretreatment (AAP) and rapid ball-milling for producing high-yield of xylo-oligosaccharides, fermentable glucose and lignin from poplar wood. Renew Energy2022; 201: 691–699. https://doi.org/10.1016/j.renene.2022.10.083
31.
BaruahJNathBSharmaR, et al. Recent trends in the pretreatment of lignocellulosic biomass for value-added products. Frontiers Media S.A, 2018. https://doi.org/10.3389/fenrg.2018.00141
32.
MaQWangLZhaiH, et al.Lignin dissolution model in formic acid–acetic acid–water systems based on lignin chemical structure. Int J Biol Macromol2021; 182: 51–58. https://doi.org/10.1016/j.ijbiomac.2021.03.179
33.
LawokoMHenrikssonGGellerstedtG. Structural differences between the lignin-carbohydrate complexes present in wood and in chemical pulps. Biomacromolecules2005; 6(6): 3467–3473. https://doi.org/10.1021/bm058014q
34.
ZhangXYangWBlasiakW. Modeling study of woody biomass: interactions of cellulose, hemicellulose, and lignin. Energy Fuels2011; 25(10): 4786–4795. https://doi.org/10.1021/ef201097d
35.
ChundawatSPSDonohoeBSda Costa SousaL, et al.Multi-scale visualization and characterization of lignocellulosic plant cell wall deconstruction during thermochemical pretreatment. Energy Environ Sci2011; 4(3): 973–984. https://doi.org/10.1039/c0ee00574f
36.
Henrik-KlemensÅCaputoFGhaffariR, et al.The glass transition temperature of isolated native, residual, and technical lignin. Holzforschung2024; 78(4): 216–230. https://doi.org/10.1515/hf-2023-0111
37.
SchwanningerMStefkeBHinterstoisserB. Qualitative assessment of acetylated wood with infrared spectroscopic methods. J Near Infrared Spectrosc2011; 19(5): 349–357. https://doi.org/10.1255/jnirs.942
38.
BrodeurGYauEBadalK, et al.Chemical and physicochemical pretreatment of lignocellulosic biomass. A review2011; 2011: 787532. https://doi.org/10.4061/2011/787532
39.
ZoghlamiAPaësG. Lignocellulosic biomass: understanding recalcitrance and predicting hydrolysis. Frontiers Media S.A, 2019. https://doi.org/10.3389/fchem.2019.00874
40.
ElleuchRTaktakW. Viscoelastic behavior of HOPE polymer using tensile and compressive loading. J Mater Eng Perform2006; 15(1): 111–116. https://doi.org/10.1361/105994906X83475
41.
Bozorg-HaddadAIskanderMChenY. Compressive strength and creep of recycled HDPE used to manufacture polymeric piling. Constr Build Mater2012; 26(1): 505–515. https://doi.org/10.1016/j.conbuildmat.2011.06.051
42.
KinlochAJMaxwellDLYoungRJ. The fracture of hybrid-particulate composites. Chapman and Hall Ltd., 1985.
SydorMPinkowskiGKučerkaM, et al.Indentation hardness and elastic recovery of some hardwood species. Applied Sciences (Switzerland)2022; 12(10): 5049. https://doi.org/10.3390/app12105049
45.
WilshawR. Review indentation fracture: principles and applications. Chapman and Hall Ltd., 1975.
46.
FuSYFengXQLaukeB, et al.Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos B Eng2008; 39(6): 933–961. https://doi.org/10.1016/j.compositesb.2008.01.002
47.
GrammatikosSPapatzaniSEverndenM. Is hygrothermal aging of construction polymer composites a reversible process?IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing, 2020. https://doi.org/10.1088/1757-899X/842/1/012004
48.
SongLLiYLeiT, et al.Research on the water absorption diffusion model and kinetics of pretreated straw. Sci Rep2025; 15(1): 9927. https://doi.org/10.1038/s41598-025-94157-0
KamarajABShawVSundaramMM. Novel fabrication of Un-coated super-hydrophobic aluminum via pulsed electrochemical surface modification. Procedia Manufacturing. Elsevier B.V., 2015, pp. 892–903. https://doi.org/10.1016/j.promfg.2015.09.081
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
