Since dental implants must withstand relatively large forces and moments in function, a better understanding of in vivo bone response to loading would aid implant design. The following topics are essential in this problem. (1) Theoretical models and experimental data are available for understanding implant loading as an aid to case planning. (2) At least for several months after surgery, bone healing in gaps between implant and bone as well as in pre-existing damaged bone will determine interface structure and properties. The ongoing healing creates a complicated environment. (3) Recent studies reveal that an interfacial cement line exists between the implant surface and bone for titanium and hydroxyapatite (HA). Since cement lines in normal bone have been identified as weak interfaces, a cement line at a bone-biomaterial interface may also be a weak point. Indeed, data on interfacial shear and tensile "bond" strengths are consistent with this idea. (4) Excessive interfacial micromotion early after implantation interferes with local bone healing and predisposes to a fibrous tissue interface instead of osseointegration. (5) Large strains can damage bone. For implants that have healed in situ for several months before being loaded, data support the hypothesis that interfacial overload occurs if the strains are excessive in interfacial bone. While bone "adaptation" to loading is a long-standing concept in bone physiology, researchers may sometimes be too willing to accept this paradigm as an exclusive explanation of in vivo tissue responses during experiments, while overlooking confounding variables, alternative (non-mechanical) explanations, and the possibility that different types of bone (e.g., woven bone, Haversian bone, plexiform bone) may have different sensitivities to loading under healing vs. quiescent conditions.
Al-Sayyed A., Deporter DA, Pilliar RM, Watson PA, Pharoh M., Berhane K., et al. (1994). Predictable crestal bone remodeling around two porous-coated titanium alloy dental implant designs. Clin Oral Impl Res5:131-141.
2.
Aspenberg P., Skripitz R. (1998). Tensile bonding between bone and titanium. In: Trans 44th Orthop Res Soc, March 16-19, 1998. New Orleans, LA: ORS, p. 220.
3.
Ayukawa Y., Takeshita F., Inoue T., Yoshinari M., Shimono M., Suetsugu T., et al. (1998). An immunoelectron microscopic localization of noncollagenous bone proteins (osteocalcin and osteopontin) at the bone-titanium interface of rat tibiae. J Biomed Mater Res41:111-119.
4.
Balshi T., Wolfinger G. (1997). Immediate loading of Branemark implants in edentulous mandible: a preliminary report. Implant Dent6:83-88.
5.
Bertram Jea, Swartz SM (1991). The 'law of bone transformation': a case of crying "Wolff"? Biol Rev66 :245-273.
6.
Branemark P-I. (1985). Introduction to osseointegration. In: Tissue-integrated prostheses. Branemark P-I , Zarb GA, Albrektsson T, editors. Chicago: Quintessence, pp. 11-76.
7.
Branemark R. (1996). A biomechanical study of osseointegration (dissertation) . Goteborg, Sweden: Goteborg University .
8.
Brunski JB (1991). Influence of biomechanical factors at the bone-biomaterial interface. In: The bone-biomaterial interface. Davies JE, editor. Toronto: University of Toronto Press, pp. 391-405.
9.
Brunski JB (1995). Biomechanics of dental implants. In: Endosseous implants for maxillofacial reconstruction. Block MS, Kent JN, editors. Philadelphia: Saunders, pp. 22-39.
10.
Brunski JB, Hurley E. (1995). Implant-supported prostheses: biomechanical analyses of failed cases. In: 1995 Bioengineering Conference BED. Vol. 29. Hochmuth RM, Langrana NA, Hefzy MS, editors. New York: American Society of Mechanical Engineers , pp. 447-448.
11.
Brunski JB, Skalak R. (1992). Biomechanical considerations. In: Advanced osseointegration surgery. Worthington P, Branemark P-I, editors. Chicago: Quintessence, pp. 15-39.
12.
Brunski JB, Yang C-J. (1998). Finite element simulation of damage-induced bone remodeling at a bone-implant interface. In: Trans 4th Orthop Res Soc, March 16-19. New Orleans LA: ORS, p. 341.
13.
Brunski JB, Hipp JA, Cochran Gvb (1989). The influence of biomechanical factors at the tissue-biomaterial interface. In: Biomedical materials and devices. Hanker JS, Giammara BL, editors. Pittsburgh: Materials Research Society, pp. 505-515.
14.
Burr DB, Schaffler MB, Frederickson RG (1988). Composition of the cement line and its possible mechanical role as a local interface in human compact bone. J Biomechan21:939-945.
15.
Burr DB, Forwood MR, Fyhrie DP, Martin RB, Schaffler MB, Turner CH (1997). Bone microdamage and skeletal fragility in osteoporotic and stress fractures. J Bone Miner Res12 :6-15.
16.
Buser D, Dahlin C, Schenk RK, editors (1994). Guided bone regeneration in implant dentistry. Chicago : Quintessence.
17.
Carlsson GE, Haraldson T. (1985). Functional response. In: Tissue-integrated prostheses. Branemark P-I, Zarb GA, Albrektsson T, editors. Chicago: Quintessence , pp. 155-163.
18.
Carter DR, Hayes WC (1977). Compact bone fatigue damage: a microscopic examination . Clin Orthop Rel Res127:265-274.
19.
Carter DR, Wright TM (1984). Yield characteristics of cortical bone. In: Functional behavior of orthopaedic biomaterials. Ducheyne P, Hastings G, editors. New York: CRC Press, pp. 9-36.
20.
Choi K., Goldstein SA (1992). A comparison of the fatigue behavior of human trabecular and cortical bone tissue. J Biomechan25:1371-1381.
21.
Cowin SC, Luo G. (1997). Modeling of ingrowth into implant cavities along the bone-implant interface. In: Osseointegration in skeletal reconstruction and joint replacement. Branemark P-I, Rydevik BL, Skalak R, editors. Carol Stream, IL: Quintessence, pp. 57-72.
22.
Cowin SC, Van Buskirk WC, Ashman RB (1987). Properties of bone. In: Handbook of bioengineering . Skalak R, Chien S, editors. New York: McGraw-Hill , pp. 2.1-2. 27.
23.
Currey JD (1984). The mechanical adaptations of bones. Princeton: Princeton University Press.
24.
Davies JE (1996). In vitro modeling of the bone/implant interface . Anat Rec245:426-445.
25.
Davies JE (1998). Mechanisms of endosseous integration. Int J Prosthodont11:391-401.
26.
Dunlap J. (1988). Implants: implications for general dentists. Dent Econ78:101-112.
27.
Edwards JT, Brunski JB, Higuchi KW (1997). Mechanical and morphologic investigation of the tensile strength of a bone-hydroxyapatite interface. J Biomed Mater Res36:454-468.
28.
Fazzalari NL, Forwood M., Manthey BA, Smith K., Kolesik P. (1997). Three-dimensional images of microdamage in cancellous bone. In: 1997 Bioengineering Conference. Vol. 35. Chandran KB, Vanderby R Jr, and Hefzy MS, editors. New York: American Society of Mechanical Engineers, pp. 305-306.
29.
Frost HM (1983). The regional acceleratory phenomenon: a review . Henry Ford Hosp Med J31:3-9.
30.
Frost HM (1987). The mechanostat: a proposed pathogenic mechanism of osteoporoses and the bone mass effects of mechanical and nonmechanical agents. Bone and Mineral2:73-85.
31.
Fyhrie DP, Hamid MS (1993). The probability distribution of trabecular level strains for vertebral cancellous bone. Trans 39th Orthop Res Soc Meeting, Feb. 15-18, San Francisco, p. 175.
32.
Glantz P.-O, Rangert B., Svensson A., Stafford GD, Arnvidarson B., Randow K., et al. (1993). On clinical loading of osseointegrated implants: a methodological and clinical study. Clin Oral Impl Res4:99-105.
33.
Goldstein SA, Wanders N., Guldberg R., Steen H., Senunas L., Goulet J., et al. (1994). Stress morphology relationships during distraction osteogenesis: linkages between mechanical and architectural factors in molecular regulation. In: Bone formation and repair. Brighton CT, Friedlander G, Lane JM, editors. Rosemont, IL: American Academy of Orthopaedic Surgeons , pp. 405-420.
34.
Graf H. ( 1969). Bruxism. Dent Clin North Am16:659-665.
35.
Graf H. ( 1975). Occlusal forces during function. In: Occlusion: research on form and function. Rowe NH, editor. Ann Arbor: University of Michigan, p. 90-11.
36.
Gross U., Roggendorf W., Schmitz H-J., Strunz V. (1988). Biomechanical and morphometric testing methods for porous and surface-reactive biomaterials. In: Quantitative characterization and performance of porous implants for hard tissue applications , ASTM STP 953. Lemons JE, editor. Philadelphia: American Society for Testing and Materials, pp. 330-346.
37.
Guo XE, Gibson LJ, McMahon TA (1993). Fatigue of trabecular bone: avoiding end-crushing effects. In: Trans 39th Orthop Res Soc, Feb. 15-18, 1993. San Francisco, CA: ORS, p. 584.
38.
Haut RC ( 1993). Biomechanics of soft tissues. In: Accidental injury, biomechanics and prevention. Nahum AM, Melvin JW, editors. New York: Springer-Verlag, pp. 224-246.
39.
Higuchi KW, Slack JM (1991). The use of titanium fixtures for intraoral anchorage to facilitate orthodontic tooth movement. Int J Oral Maxillofac Implants6:38-344.
40.
Hipp JA ( 1986). An experimental and analytical study of the tissue response to loaded and control implants in bone (dissertation). Troy, NY: Rensselaer Polytechnic Institute.
41.
Hong L., Hengchang X., de Groot K. (1992). Tensile strength of the interface between hydroxyapatite and bone. J Biomed Mater Res26:7-18.
42.
Hoshaw SJ, Brunski JB, Cochran Gvb (1994a). Mechanical loading of Branemark fixtures affects interfacial bone modeling and remodeling. Int J Oral Maxillofac Implants9:345-360.
43.
Hoshaw SJ, Fyhrie DP, Schaffler MB (1994b). The effect of implant insertion and design on bone microdamage. In: The biological mechanisms of tooth eruption, resorption and replacement by implants. Davidovitch Z, editor. Boston: Harvard Society for the Advancement of Orthodontics, pp. 735-741.
44.
Hoshaw SJ, Watson JT, Schaffler MB, Fyhrie DP (1995). Microdamage at bone-implant interfaces affects bone remodeling activity. In: Trans 41st Orthop Res Soc, Feb. 13-16. Orlando, FL: ORS, p. 188.
45.
Huja SS, Katona T., Moore BK, Roberts WE (1998). Microhardness and anisotropy of the vital osseous interface and endosseous implant supporting bone. J Orthop Res16:54-60.
46.
Isidor F. (1996). Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographical study in monkeys. Clin Oral Impl Res7:143-152.
47.
Kawaguchi H., McKee MD, Okamoto H., Nanci A. (1993). Immunocytochemical and lectin-gold characterization of the interface between alveolar bone and implanted hydroxyapatite in the rat. Cells and Materials3:337-350.
48.
Kelly PJ, Bronk JT (1994). Circulation, blood flow, and interstitial fluid flow in fracture healing. In: Bone formation and repair. Brighton CT, Friedlander G, Lane JM, editors. Rosemont, IL: American Academy of Orthopaedic Surgeons , pp. 197-212.
49.
Kosmidou L., Toljanic JA, Moran WJ, Panje WR (1998). The use of percutaneous implants for the prosthetic rehabilitation of orbital defects in irradiated cancer patients: a report of clinical outcomes and complications. Int J Oral Maxillofac Implants13:121-126.
50.
Lekholm U., van Steenberghe D., Herrmann I., Bolender C., Folmer T., Gunne J., et al. (1994). Osseointegrated implants in the treatment of partially edentulous jaws: a prospective 5-year multicenter study. Int J Oral Maxillofac Implants9:627-635.
51.
McKee MD, Nanci A. (1993). Ultrastructural, cytochemical and immunocytochemical studies on bone and its interfaces. Cells and Materials3:219-243.
52.
Mailath G., Schmid M., Lill W., Miller J. (1991). 3D-finiteelemente-Analyse der Biomechanik von rein Implantatgetragenen Extensionbrucken. Z Zahnärztl Implantol7:205-211.
53.
Mailath-Pokorny G., Solar P. (1996). Biomechanics of endosseous implants. In: Endosseous implants: scientific and clinical aspects. Watzek G, editor. Carol Stream, IL: Quintessence, pp. 291-318.
54.
Martin B. (1995). Mathematical model for repair of fatigue damage and stress fracture in osteonal bone. J Orthop Res13:309-316.
55.
Martin RB, Burr DB ( 1989). Structure, function, and adaptation of compact bone. New York: Raven Press.
56.
Mericske-Stern R. (1998). Three-dimensional force measurements with mandibular overdentures connected to implants by ball-shaped retentive anchors. A clinical study. Int J Oral Maxillofac Implants13:36-43.
57.
Mori S., Burr M. ( 1993). Increased cortical remodeling following fatigue microdamage . Bone14:103-109.
58.
Nakamura T., Yamamuro T., Higashi S., Kokubo T., Itoo S. ( 1985). A new glass-ceramic for bone replacement: evaluation of its bonding to bone tissue. J Biomed Mater Res19:685-698.
59.
Nanci A., McKee MD (1994). The bone-biomaterial interface contains similar components as naturally-occurring cement lines in bone. In: Electron microscopy 1994-Applications in biological sciences. Vol. 3BJouffrey B, Colliex C, Hernandez-Verdun D, Schrevel J, Thomas D, editors. Les Ulis Cedex A, France: Les editions de physique , pp. 885-886.
60.
Nanci A., McCarthy GF, Zalzal S., Clokie Cml, Warshawsky H., McKee MD (1994). Tissue response to titanium implants in the rat tibia: ultrastructural, immunocytochemical and lectin-cytochemical characterization of the bone-titanium interface. Cells and Materials4:1-30.
61.
Nicolella DP, Lankford J., Jepsen K., Davy DT ( 1997). Correlation of physical damage development with microstructure and strain localization in bone. In: 1997 Bioengineering Conference. Vol. 35. Chandran KB, Vanderby R Jr, Hefzy MS, editors. New York: American Society of Mechanical Engineers, pp. 311-312.
62.
Nicolella DP, Nicholls AE, Lankford J. (1998). Micromechanics of creep in cortical bone. In: Trans 44th Orthop Res Soc, March 16-19, 1998. New Orleans, LA: ORS, p. 137.
63.
Osborn JW, Mao J. (1993). A thin bite force transducer with three-dimensional capabilities reveals a consistent change in bite force direction during jaw muscle endurance tests. Arch Oral Biol38:139-144.
64.
Oyola A., Brunski JB (1997). A finite element simulation of debonding at an osseointegrated bone-dental implant interface. In: 1997 Bioengineering Conference. Vol. 35. Chandran KB, Vanderby R Jr, Hefzy MS, editors. New York: American Society of Mechanical Engineers, pp. 577-578.
65.
Pattin CA, Caler WE, Carter DR (1996). Cyclic mechanical property degradation during fatigue loading of cortical bone. J Biomechan29:69-79.
66.
Pilliar RM (1991). Quantitative evaluation of the effect of movement at a porous coated implant-bone interface. In: The bone-biomaterial interface. Davies JE, editor. Toronto: University of Toronto Press, pp. 380-387.
67.
Pilliar RM, Deporter DA, Watson PA, Valiquett N. (1991). Dental implant design-effect on bone remodeling . J Biomed Mater Res25:889-902.
68.
Plenk H. Jr, Zitter H. (1996). Material considerations. In: Endosseous implants: scientific and clinical aspects. Watzek G, editor. Carol Stream, IL: Quintessence, pp. 63-99.
69.
Prabhu A., Brunski JB (1997a). Finite element analysis of a clinical case involving overload of an oral implant interface. In: 1997 Bioengineering Conference BED. Vol. 35. Chandran KB, Vanderby R Jr , Hefzy MS, editors. New York: American Society of Mechanical Engineers , pp. 575-576.
70.
Prabhu AA, Brunski JB (1997b). An overload failure of a dental prosthesis: a 3D finite element nonlinear contact analysis. In: 1997 Advances in Bioengineering BED. Vol. 36. Simon B, editor. New York: American Society of Mechanical Engineers, pp. 141-142.
71.
Prendergast PJ, Huiskes R., Søballe K. (1997). Biophysical stimuli on cells during tissue differentiation at implant surfaces. J Biomechan30:539-548.
72.
Quirynen M., Naert I., van Steenberghe D. (1992). Fixture design and overload influence marginal bone loss and fixture success in the Branemark implant system. Clin Oral Impl Res3:104-111.
73.
Rangert B., Gunne J., Glantz P-O., Svensson A. (1995a). Vertical load distribution on a three-unit prosthesis supported by a natural tooth and a single Branemark implant. Clin Oral Impl Res6:40-46.
74.
Rangert B., Krogh Phj, Langer B., van Roekel N. (1995b). Bending overload and implant fracture: a retrospective clinical analysis. Int J Oral Maxillofac Implants10:326-334.
75.
Richter E-J (1998). In vivo horizontal bending moments on implants . Int J Oral Maxillofac Implants13:232-243.
76.
Roberts WE (1988). Bone tissue interface. J Dent Educ52 :804-809.
77.
Roberts WE, Turley PK, Brezniak N., Fielder PJ (1987). Bone physiology and metabolism. CA Dent Assoc J15:54-61.
78.
Rubin CT, McLeod KJ (1990). Biologic modulation of mechanical influences in bone remodeling. In: Biomechanics of diarthrodial joints. Vol. II. Mow VC, Ratcliffe A, Woo SL-Y , editors. New York: Springer-Verlag , pp. 97-118.
79.
Schenk R., Hunziker EB (1994). Histologic and ultrastructural features of fracture healing. In: Bone formation and repair. Brighton CT, Friedlander G, Lane JM, editors. Rosemont, IL: American Academy of Orthopaedic Surgeons, pp. 117-146.
80.
Schenk RK, Buser D., Hardwick WR, Dahlin C. (1994). Healing pattern of bone regeneration in membrane-protected defects: a histological study in the canine mandible. Int J Oral Maxillofac Implants9:13-29.
81.
Schielphake H., Berding G. (1998). Evaluation of bone healing in patients with bone grafts and endosseous implants using positron emission tomography (SPECT) . Clin Oral Impl Res9:34-42.
82.
Schmikal T. (1984). Vergleichende Untersuchungen über die Knochenhaftung verschiedener Implantatwerkstoffe mit hilfe enossaler Implantate (dissertation) . Cologne, Germany: University of Cologne.
83.
Schnitman PA, Wohrle PS, Rubenstein JE (1990). Immediate fixed interim prostheses supported by two-stage threaded implants: methodology and results. J Oral Implantol16 :96-105.
84.
Skalak R. (1983). Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent49:843-848.
85.
Skalak R., Brunski JB, Mendelson M. (1993). A method for calculating the distribution of vertical forces among variable-stiffness abutments supporting a dental prosthesis. In: 1993 Bioengineering Conference-BED. Vol. 24. Langrana NA, Friedman MH , Grood ES, editors. New York: American Society of Mechanical Engineers , pp. 347-350.
86.
Søballe K., Hansen ES, B-Rasmussen H., Jørgensen PH, Bunger C. (1992a). Tissue ingrowth into titanium and hydroxyapatite coated implants during stable and unstable mechanical conditions. Acta Orthop Scand64(Suppl 225):28.
87.
Søballe K., B-Rasmussen H., Hansen ES, Bunger C. (1992b). Hydroxyapatite coating modifies implant membrane formation. Controlled micromotion studied in dogs. Acta Orthop Scand63:128-140.
88.
Søballe K., Hansen ES, B-Rasmussen H., Bunger C. (1993). Hydroxyapatite coating converts fibrous tissue to bone around loaded implants. J Bone Jt Surg75(B):270-278.
89.
Spector M., Lalor P. (1996). In vivo assessment of tissue compatibility. In: Biomaterials science: an introduction to materials in medicine . Ratner BD, Hoffman AS, Schoen FJ, Lemons JE, editors. New York: Academic Press, pp. 220-228.
90.
Stegaroiu R., Sato T., Kusakari H., Miyakawa 0 (1998). Influence of restoration type on stress distribution in bone around implants: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants13:82-90.
91.
Steinemann SG, Eulenberger J., Maeusli P-A., Schroeder A. (1986). Adhesion of bone to titanium. In: Biological and biomechanical performance of biomaterials. Christel P, Meunier A, Lee AJC, editors. Amsterdam: Elsevier, pp. 409-414.
92.
Szmukler-Moncler S., Salama H., Reingewirtz Y., Dubuille JH (1998). Timing and loading and effect of micromotion on bone-dental implant interface: review of experimental literature. J Biomed Mater Res (Appl Biomater)43:192-203.
93.
Taylor JL, Brunski JB, Hoshaw SJ, Cochran Gvb, Higuchi KW (1992). Interfacial bond strengths of Ti-6A1-4V and hydroxyapatite-coated Ti-6A1-4V implants in cortical bone. In: Tissue integration in oral, orthopedic and maxillofacial reconstruction. Laney WR, Tolman DE, editors. Chicago: Quintessence, pp. 125-132.
94.
Treharne RW (1981). Review of Wolff's Law and its proposed means of operation. Orthop Rev10:35-47.
95.
Vaillancourt H., Pilliar RM, McCammond D. (1995). Finite element analysis of bone remodeling around porous coated dental implants. J Appl Biomater6:267-282.
96.
Vaillancourt H., Pilliar RM, McCammond D. (1996). Factors affecting crestal bone loss with dental implants partially covered with a porous coating: a finite element analysis . Int J Oral Maxillofac Implants11:351-359.
97.
Van Eijden Tmgj (1991). Three-dimensional analyses of human bite-force magnitude and moment. Arch Oral Biol36:535-539.
98.
van Rietbergen B., Huiskes R., Weinans H., Sumner DR, Turner TM, Galante JO (1993). The mechanism of bone remodeling and resorption around press-fitted THA stems. J Biomechan26:369-382.
99.
van Steenberghe D., Jacobs R. (1992). Physiological aspects of implant-supported prostheses . In: Tissue-integrated prostheses. Branemark P-I, Zarb GA, Albrektsson T, editors. Chicago: Quintessence, pp. 40-46.
100.
van Steenberghe D., Tricio J., Van den Eynde, Naert I., Quirynen M. (1994). Soft and hard tissue reactions towards implant design and surface characteristics and the influence of plaque and/or occlusal loads. In: The biological mechanisms of tooth eruption, resorption and replacement by implants. Davidovitch Z , editor. Boston: Harvard Society for the Advancement of Orthodontics, pp. 687-697.
101.
Wachtel EF, Keaveny TM (1997). Dependence of trabecular damage on mechanical strain. J Orthop Res15:781-787.
102.
Weinreb M., Rodan GA, Thompson DD (1989). Osteopenia in the immobilized rat hind limb is associated with increased bone resorption and decreased bone formation. Bone10:187-194.
103.
Wong M., Eulenberger J., Schenk R., Hunziker E. (1995). Effect of surface topology on the osseointegration of implant materials in trabecular bone. J Biomed Mater Res29 :1567-1576.
104.
Zioupos P., Currey JD (1994). The extent of microcracking and the morphology of microcracks in damaged bone. J Mater Sci29:978-986.
