Structure-property Relationship of Polyimides Derived from Sulfonated Diamine Isomers

Abstract

Four novel sulfonated diamine monomers which are isomers to each other, 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid (pBAPBDS), 4,4′-bis(3-aminophenoxy)biphenyl-3,3′-disulfonic acid (mBAPBDS), 2,2′-bis(4-aminophenoxy)biphenyl-5,5″-disulfonic acid (oBAPBDS), and 4,4--bis(4-amino-2-sulfophenoxy)biphenyl (iBAPBDS), were synthesized and the related sulfonated polyimides (SPIs) were prepared from these sulfonated diamines and 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA). The resulting SPIs had the same chemical composition and ion exchange capacity (IEC) but quite different solubility behaviors and water stability. Nonlinear sulfonated diamine (m-BAPBDS and oBAPBDS)-based polyimides showed much better solubility in many organic solvents than the linear diamine (pBAPBDS and iBAPBDS)-based ones. It was found that the water stability of the SPI membranes was the total effects of solubility stability and hydrolysis stability. Solubility stability is mainly determined by the IEC level and the configuration of the sulfonated diamine moiety. High IEC and nonlinear configuration lead to poor solubility stability and vice versa. Hydrolysis stability is strongly dependent on the basicity of the sulfonated diamine moiety. Highly basic diamines give much better hydrolysis stability than weakly basic ones. Water stability is also affected by the chain flexibility of the SPIs, i.e., polyimides with flexible structure tend to have better water stability than the ones with rigid structure. As a result, NTDA-pBAPBDS, which has linear and highly basic diamine moiety and flexible main chain showed excellent water stability at high temperature. For example, it could maintain mechanical strength after being soaked in water at 80°C for more than 1000 h and the pBAPBDS-based co-SPIs displayed much better water stability at 100 or 130°C.

Keywords

Fuel cell isomer mechanical property polymer electrolyte membrane proton conductivity sulfonated diamine sulfonated polyimides hydrolysis water stability

Get full access to this article

View all access options for this article.

References

Ghosh M K and Mittal K L , eds 1996 Polyimides: Fundamentals and Applications ( New York: Marcel Dekker )

Mittal K L , eds 2001 Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications Vol 1 ( Utrecht: VSP )

Faure S, Mercier R, Aldebert P, Pineri M and Sillion B 1996 French Pat 9605707

Faure S , Cornet N , Gebel G , Mercier R , Pineri M and Sillion B 1997 Proceedings of Second International Symposium on New Materials for Fuel Cell and Modern Battery Systems

Montreal Canada

July 6-10 p 818-818

Vallejo E , Pourcelly G , Gavach C , Mercier R and Pineri M 1999 J. Membr. Sci. 160 127-127

Genies C , Mercier R , Sillion B , Cornet N , Gebel G and Pineri M 2001 Polymer 42 359-359

Zhang Y , Litt M , Savinell R F and Wainright J S 1999 Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 40 480-480

Kim H and Litt M 2001 Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 42 486-486

Lee C , Sundar S , Kwon J and Han H 2004 J. Polym. Sci.: Part A: Polym. Chem. 42 3612-3612

10.

Fang J , Guo X , Harada S , Watari T , Tanaka K , Kita H and Okamoto K 2002 Macromolecules 35 9022-9022

11.

Guo X , Fang J , Watari T , Tanaka K , Kita H and Okamoto K 2002 Macromolecules 35 6707-6707

12.

Watari T , Fang J , Tanaka K , Kita H and Okamoto K 2004 J. Membr. Sci. 230 111-111

13.

Guo X , Fang J , Tanaka K , Kita H and Okamoto K 2004 J. Polym. Sci.: Part A: Polym. Chem. 42 1432-1432

14.

Genies C , Mercier R , Sillion B , Petiaud R , Cornet N , Gebel G and Pineri M 2001 Polymer 42 5097-5097

15.

Sroog C 1991 Prog. Polym. Sci. 16 561-561