Space Environment Exposure of Polymer Films on the Materials International Space Station Experiment: Results from MISSE 1 and MISSE 2

Abstract

A total of thirty-one samples were included in the National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Polymer Film Thermal Control (PFTC) and Gossamer Materials experiments, which were exposed to the low Earth orbit environment for nearly 4 years on the exterior of the International Space Station (ISS) as part of the Materials International Space Station Experiment (MISSE 1 and MISSE 2). This paper describes objectives, materials, and characterizations for the MISSE 1 and MISSE 2 GRC PFTC and Gossamer Materials samples. Samples included films of polyimides, fluorinated polyimides, and Teflon® fluorinated ethylene propylene (FEP) with and without second-surface metalized layers and/or surface coatings. Films of polyphenylene benzobisoxazole (PBO) and a polyarylene ether benzimidazole (TOR-LM^TM) were also included. Polymer film samples were examined post-flight for changes in mechanical and optical properties. The environment in which the samples were located was characterized through analysis of sapphire contamination witness samples and samples dedicated to atomic oxygen (AO) erosion measurements. Results of the analyses of the PFTC and Gossamer Materials experiments are discussed.

Keywords

Space environment International Space Station spacecraft thermal control polymer films

Get full access to this article

View all access options for this article.

References

Dever, J.A. , Banks, B.A. , de Groh, K.K. , and Miller, S.K. (2005). Degradation of Spacecraft Materials, In: Kutz, M. (ed.), Handbook of Environmental Degradation of Materials, William Andrew Publishing, Norwich, New York.

Dever, J.A. , Miller, S.K. , Messer, R.K. , Sechkar, E.A. , and Tollis, G. ( 2001). Exposure of Polymer Film Thermal Control Materials on the Materials International Space Station Experiment (MISSE), AIAA 2001-4924 , American Institute of Aeronautics and Astronautics.

Pippin, G. (2006). Summary Status of MISSE-1 and MISSE-2 Experiments and Details of Estimated Environmental Exposures for MISSE-1 and MISSE-2, AFRL-ML-WP-TR-2006-4237, Air Force Research Laboratory .

American Society for Testing and Materials (1995). Standard Test Method for Tensile Properties of Plastics, ASTM D 638-95, American Society for Testing and Materials, West Conshohocken.

American Society for Testing and Materials (1992). Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres, ASTM E 903-82, Re-approved 1992, American Society for Testing and Materials, West Conshohocken.

Jaworske, D.A. , and Skowronski, T.J. Portable Infrared Reflectometer for Evaluating Emittance, In: Proceedings of the Space Technology and Applications International Forum (STAIF) 2000, Albuquerque, NM, February 2000, American Institute of Physics, Melville, New York , 791-796.

de Groh, K.K. , Banks, B.A. , McCarthy , C.E. , Rucker, R.N. , Berger, L.A. and Roberts, L.M. (2006). Analyses of the MISSE PEACE Polymers International Space Station Exposure Experiment, In: Proceedings of the 10th International Symposium on "Materials in a Space Environment" & 8th International Conference on "Protection of Materials and Structures in a Space Environment", Collioure , France, June 2006.

Wang, HSU and Wittberg , (1991). "Oxidation Kinetics of Silicon Carbide Whiskers Studied by X-Ray Photoelectron Spectroscopy", J. Mater. Sci. , 26: 1655-1658.

Powell , and Jablonski , (2001). "Effects of Elastic-Electron Scattering on Measurements of Silicon Dioxide Film Thicknesses by X-Ray Photoelectron Spectroscopy", J. Elec. Spec., 114-116: 1139-1143.