Cure kinetics and chemorheological behavior of a wind epoxy resin system and its viscoelastic properties reinforced by glass fiber matt with process of vacuum assisted resin transfer molding
Restricted accessResearch articleFirst published online September, 2011
Cure kinetics and chemorheological behavior of a wind epoxy resin system and its viscoelastic properties reinforced by glass fiber matt with process of vacuum assisted resin transfer molding
In order to investigate the processability of a wind epoxy resin for the vacuum-assisted resin transfer molding (VARTM) process, a differential scanning calorimeter and rheometry instrument were applied to characterize the curing properties and study the chemorheological behavior to obtain a better understanding of the resin system in order to define the implementation of the process. The curing temperature parameters were established along with a cure kinetic model to predict the cure behavior. In addition, the influence of the gelation and vitrification was also examined by rheological methods. No obvious vitrification appeared in the epoxy system and the apparent active energy of the cure reaction calculated by gel time was almost the same as the differential scanning calorimetry result. What is more, the viscoelastic properties of the composite reinforced by glass fiber matt was characterized through dynamic mechanical analysis, and it proved that post-cure was necessary to ensure complete cure and that the stiffness increased several magnitudes after glass fiber reinforcement.
CaiZ-QMovvaSGuerraDEffect of carbon nanofiber and polyaniline surface modification on cure kinetics of wind blade epoxy resin. J Appl Polym Sci2010; 118: 2328–2335.
2.
DanismanM. Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors. Compos Sci Technol2007; 67: 367–379.
3.
BeckwithSWCraigRH. Resin transfer molding, a decade of technology advances. SAMPE J1998; 34: 297–311.
4.
PeringGAFarrellPVSpringerGS. Degradation of tensile and shear properties of composites exposed to fire or high temperature. J Compos Mater1980; 14: 54–58.
5.
ZhouGMovvaSLeeLJ. Nanoclay and long-fiber-reinforced composites based on epoxy and phenolic resins. J Appl Polym Sci2008; 108: 3720–3726.
ChatterjeeAGillespieJWJr. Room temperature-curable VARTM epoxy resins: promising alternative to vinyl ester resins. J Appl Polym Sci2010; 115: 665–673.
8.
GreenKJDeanDRVaidyaUKNyairoE. Multiscale fiber reinforced composites based on a carbon nanofiber/epoxy nanophased polymer matrix: synthesis, mechanical, and thermomechanical behavior. Compos Part A2009; 40: 1470–1475.
9.
ColeKCA new approach to modeling the cure kinetics of epoxy/amine thermosetting resins. 1. Mathematical development. Macromolecules1991; 24: 3093–3097.
10.
HorieKHiuraHSawadaMMitaIKambeH. Calorimetric investigation of polymerization reactions. III. Curing reaction of epoxides with amines. J Polym Sci, Part A-11970; 8: 1357–1372.
11.
HsiaoKTLittleRRestrepoOMinaieB. A study of direct cure kinetics characterization during liquid composite molding. Compos Part A, 2006; 37: 925–933.
12.
LiuLLiM. Curing mechanisms and kinetic analysis of DGEBA cured with a novel imidazole derivative curing agent using DSC techniques. J Appl Polym Sci2010; 117: 3220–3227.
13.
DuSVGuoZSZhangBMWuZJ. Cure kinetics of epoxy resin used for advanced composites. Polym Int2004; 53: 1343–1347.
14.
HwangJGRowCGHwangILeeSJ. A chemorheological study on the curing of thermosetting resins. Ind Eng Chem Res1994; 33: 2377–2383.
15.
HanCD (2007) Rheology and Processing of Polymeric Materials. Volume 1 Polymer Rheology, Oxford; New York: Oxford University Press.
16.
RatnaDVarleyRSimonGP. Processing and chemorheology of epoxy resins and their blends with dendritic hyperbranched polymers. J Appl Polym Sci2004; 92: 1604–1610.
17.
HaddadiHMohammadHFamiliNNazokdastEMoradiS. Chemorheological analyses of a reaction injection moulding polyurethane formulation. Iranian J Polymer2006; 15: 967–977.
18.
GuigoNMijaAVincentLSbirrazzuoliN. Chemorheological analysis and model-free kinetics of acid catalysed furfuryl alcohol polymerization. Phys Chem Chem Phys2007; 9: 5359–5366.
19.
PrimeRB. Differential scanning calorimetry of the epoxy cure reaction. Polym Eng Sci1973; 13: 365–371.
20.
LuYDuanYXLiangZYZhangZG. Studies on rheological behaviors of phenolic resin system for resin transfer molding. Acta Materiae Compositae Sinica2002; 19: 33–37(in Chinese).
21.
KamalMR. Thermoset characterization for moldability analysis. Polym Eng Sci1974; 14: 231–239.
HalleyPJGeorgeGA. Chemorheology of Polymers from Fundamental Principles to Reactive Processing. Cambridge; New York: Cambridge University Press, 2009.
24.
SimonSLMckennaGBSindtO. Modeling the evolution of the dynamic mechanical properties of a commercial epoxy during cure after gelation. J Appl Polym Sci2000; 76: 495–508.
25.
WangXGillhamJK. Physical aging in the glassy state of a thermosetting system vs. extent of cure. J Appl Polym Sci1992; 47: 447–460.
26.
OyangurenPAWilliamsRJJ. Rejuvenation of epoxy glasses subjected to uniaxial compression. J Appl Polym Sci1994; 35: 5279–5282.
27.
RaghavanSRChenLAMcdowellCKhanSA. Rheological study of crosslinking and gelation in chlorobutyl elastomer systems. Polymer1996; 37: 5869–5875.
28.
HameedNSreekumarPAFrancisBYangWThomasS. Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fiber composites. Compos Part A: Appl Sci Manufact2007; 38: 2422–2432.
29.
OrnaghiHLBolnerASFiorioRJrZatteraAJ. Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding. J Appl Polym Sci2010; 118: 887–896.
30.
TsigeMLorenzCDStevensMJ. Role of network connectivity on the mechanical properties of highly cross-linked polymers. Macromolecules2004; 3: 8466–8472.
