MWCNT-reinforced polyarylene ether nitrile nanocomposites

Abstract

In this study, we investigated the effect of surface roughness of acidulated multi-walled carbon nanotube (MWCNT) on the physical performances of MWCNT/polyarylene ether nitrile (MWCNT/PEN) nanocomposites. Acidulated MWCNTs with different surface roughnesses were prepared by ultrasonicating and refluxing of MWCNTs in the mixture solvent of sulfuric acid/nitric acid and characterized by atomic force microscopy. With longer acidulating time, more and more oxygen functional groups including carboxyl and hydroxyl groups which result in the coarser surface of the obtained MWCNT, were generated. MWCNT/PEN composites were fabricated by using the solution-casting method with the acidulated MWCNTs and PEN. SEM observation showed that the acidulated MWCNTs are well-embedded in the polymer matrix without aggregation. differential scanning calorimetry and thermogravimetric analysis results showed that the incorporation of acidulated MWCNTs can improve the thermal behavior of the resulted polymer composites. The coarser the surface of the acidulated MWCNT, the better the mechanical performances of the obtained composites, while opposite results were observed for the dielectric properties of the nanocomposites. The dynamical rheological results showed that a better compatibility between the MWCNT and PEN is achieved when the coarser MWCNT is used.

Keywords

Surface roughness MWCNT polyarylene ether nitrile

Get full access to this article

View all access options for this article.

References

Chatterjee

Nueesch

Chu

BTT

. Comparing carbon nanotubes and graphene nanoplatelets as reinforcements in polyamide 12 composites. Nanotechnology 2011; 22: 275714.

Ahmad

Mark

. Polyimide-ceramic hybrid composites by the sol-gel route. Chem Mater 2001; 13: 3320–3330.

Liaw

Wang

Huang

. Advanced polyimide materials: syntheses, physical properties and applications. Prog Polym Sci 2012; 37: 907–974.

Rahate

Nemade

Waghuley

. Polyphenylene sulfide (PPS): state of the art and applications. Rev Chem Eng 2013; 29: 471–489.

Zhao

Xue

Ran

. Modification of polyethersulfone membranes-a review of methods. Prog Mater Sci 2013; 58: 76–150.

Wang

Zhou

. Fast photoinduced large deformation of colloidal spheres from a novel 4-arm azobenzene compound. ACS Appl Mater Inter 2015; 7: 16889–16895.

Long

Wei

Huang

. Mechanical, dielectric, and rheological properties of poly(arylene ether nitrile)-reinforced poly(vinylidene fluoride). High Perform Polym. 2017; 29(2): 178–186.

Tong

Liu

Long

. Study of polyarylene ether nitrile terminated with phthalonitrile/hybrid Fe₃O₄ nanospheres composites by orthogonal experiments. J Appl Polym Sci 2014; 131: 40418.

Wang

. High dielectric constants of composites of fiber-like copper phthalocyanine-coated graphene oxide embedded in poly(arylene ether nitriles). J Electron Mater 2015; 44: 2378–2386.

10.

Long

Chen

Liu

. Carboxyl-containing polyarylene ether nitrile/Fe₃O₄ hybrids and their effects on the PEN composites. Polym Compos 2015; 36: 1325–1334.

11.

Amir

Zhou

Liu

. Synthesis and characterization of self-catalyzed imide-containing pthalonitrile resins. J Polym Sci A Polym Chem 2010; 48: 5916–5920.

12.

Yang

Zou

. Graphene nanoplatelet-reinforced semi-crystal poly(arylene ether nitrile) nanocomposites prepared by the twin-screw extrusion. Polym Compos 2014; 35: 404–411.

13.

Zhou

Yang

. One step grafting of iron phthalocyanine containing flexible chains on Fe₃O₄ nanoparticles towards high performance polymer magnetic composites. J Magn Magn Mater 2015; 385: 368–376.

14.

Tong

Zheng

Tang

. Novel high-temperature-resistant single-polymer composites based on self-reinforced phthalonitrile end-capped polyarylene ether nitrile. Mater Lett 2015; 159: 337–340.

15.

Feng

Jin

Huang

. In situ fabrication of MWCNTs reinforce dielectric performances of polyarylene ether nitrile nanocomposite. J Mater Sci Mater El 2015; 26: 1–10.

16.

Iijima

. Helical microtubes of graphitic carbon. Nature 1991; 354: 56–58.

17.

Ajayan

. Nanotubes from carbon. Chem Rev 1999; 99: 1787–1799.

18.

Baughman

Zakhidov

de Heer

. Carbon nanotubes-the route toward applications. Science 2002; 297: 787–792.

19.

Sun

Lin

. Functionalized carbon nanotubes: properties and applications. Accounts Chem Res 2002; 35: 1096–1104.

20.

Moniruzzaman

Winey

. Polymer nanocomposites containing carbon nanotubes. Macromolecules 2006; 39: 5194–5205.

21.

Tasis

Tagmatarchis

Bianco

. Chemistry of carbon nanotubes Chem Rev 2006; 106: 1105–1136.

22.

Coleman

Khan

Gun’ko

. Mechanical reinforcement of polymers using carbon nanotubes. Adv Mater 2006; 18: 689–706.

23.

Kim

Liu

Wang

. Flexible, highly durable, and thermally stable SWCNT/polyimide transparent electrodes. ACS Appl Mater Inter 2015; 7: 20865–20874.

24.

Meng

Zhang

. Carbon nanotube composite films with switchable transparency. ACS Appl Mater Inter 2011; 3: 658–661.

25.

Zhuang

Liu

. An investigation into the hydrogen bond of poly (p-phenylene benzobisoxazole)/carboxylic carbon nanotube composites, insight from quantum mechanics/molecular mechanics simulation. Polym Compos 2015; 36: 1454–1461.

26.

Dai

. Self-assembled graphene/carbon nanotube hybrid films for supercapacitors. J Phys Chem Lett 2010; 1: 467–470.

27.

Luo

Liu

. Structure-property-processing relationships of single-wall carbon nanotube thin film piezoresistive sensors. Carbon 2013; 59: 315–324.

28.

Feng

Meng

. Introducing magnetic-responsive CNT/Fe₃O₄ composites to enhance the mechanical properties of sulfonated poly(arylene ether nitrile) proton-exchange membranes. J Polym Res 2015; 22: 37.

29.

Jin

Feng

Jia

. Aminophenoxyphthalonitrile modified MWCNTs/polyarylene ether nitriles composite films with excellent mechanical, thermal, dielectric properties. J Mater Sci Mater El 2015; 26: 5152–5160.

30.

Jin

Feng

Huang

. Effect of SiO₂ grafted MWCNTs on the mechanical and dielectric properties of PEN composite films. Appl Surf Sci 2015; 357: 704–711.

31.

Huang

Feng

. BaTiO₃@MWCNTs core/shell nanotubes embedded PEN nanocomposite films with high thermal stability and high permittivity. Mater Lett 2013; 96: 139–142.

32.

Huang

Tong

. Novel PEN/BaTiO₃/MWCNT multicomponent nanocomposite film with high thermal stability for capacitor applications. J Electron Mater 2013; 42: 726–733.

33.

Chen

Long

. Synthesis and properties of sulfonated poly(arylene ether nitrile) copolymers containing carboxyl groups for proton-exchange membrane materials. J Appl Polym Sci 2014; 131: 40213.

34.

Jia

Liu

. Covalent grafting of a-CNTs on copper phthalocyanine for the preparation of PEN nanocomposites with high dielectric constant and high thermal stability. J Mater Sci Mater El 2015; 26: 8922–8932.

35.

Tang

Zhong

Yang

. Flexible polyarylene ether nitrile/BaTiO₃ nanocomposites with high energy density for film capacitor applications. J Electron Mater 2011; 40: 141–148.

36.

Feng

Huang

Tang

. Effects of surface modification on interfacial and rheological properties of CCTO/PEN composite films. Colloid Surf A 2014; 441: 556–564.

37.

Meng

Zhao

Zhan

. Design of thorn-like micro/nanofibers: fabrication and controlled morphology for engineered composite materials applications. J Mater Chem 2011; 21: 16385–16390.

38.

Huang

Feng

Liu

. Design of bristle-like TiO₂-MWCNT nanotubes to improve the dielectric and interfacial properties of polymer-based composite films. RSC Adv 2014; 4: 4985–4992.

39.

Lue

Zhang

. Effects of carbon nanotubes on rheological behavior in cellulose solution dissolved at low temperature. Polymer 2010; 51: 2748–2754.

40.

Ajji

Choplin

Prud’Homme

. Rheology and phase separation in polystyrene/poly (vinyl methyl ether) blends. J Polym Sci B Polym Phys 1988; 26: 2279–2289.

41.

Cole

RH.

Dispersion and absorption in dielectrics I. Alternating current characteristics. J Chem Phys 1941; 9: 341–351.