Dynamic mechanical spectroscopy is used to investigate the variation of the glass rubbery transition temperature (Tg) of graphene/polyimide nanocomposites. The Tg was obtained as the temperature corresponding to the peak of the tan δ versus temperature curve for the alpha transition. Cole–Cole curve was constructed for the matrix and the composites composite at 1 Hz and a hemispherical curve was obtained suggesting that the constituents have similar relaxation behavior. The time–temperature superposition principle was used to model the behavior of the nanocomposites at lower frequencies and longer times. Frequency sweep was performed in the range of 0.05–100 Hz at different temperatures. The storage modulus curves obtained at different temperatures (isothermal), as a function of frequency, were shifted horizontally to construct a continuous master curve. Both the generalized reduced gradient method and the Williams–Landel–Ferry (WLF) equation were used to calculate the activation energy for glass–rubber transition. The universal constants C1 and C2 were determined using the WLF equation. The dependence of relaxation time on temperature was verified.
JiangQWangXZhuY. Mechanical, electrical and thermal properties of aligned carbon nanotube/polyimide composites. Compos B Eng2014; 56: 408–412.
2.
SoHHChoJWSahooNG. Effect of carbon nanotubes on mechanical and electrical properties of polyimide/carbon nanotubes nanocomposites. Eur Polym J2007; 43(9): 3750–3756.
3.
ChoDLeeSYangG. dynamic mechanical and thermal properties of phenylethynyl-terminated polyimide composites reinforced with expanded graphite nanoplatelets. Macromol Mater Eng2005; 290(3): 179–187.
ZhuBKXieSHXuZK. Preparation and properties of the polyimide/multi-walled carbon nanotubes (MWNTs) nanocomposites. Compos Sci Technol2006; 66(3): 548–554.
6.
DalmasFCavailléJYGauthierC. Viscoelastic behavior and electrical properties of flexible nanofiber filled polymer nanocomposites. Influence of processing conditions. Compos Sci Technol2007; 67(5): 829–839.
7.
TarapowJABernalCRAlvarezVA. Mechanical properties of polypropylene/clay nanocomposites: effect of clay content, polymer/clay compatibility, and processing conditions. J Appl Polym Sci2009; 111(2): 768–778.
8.
Van KrevelenDWNijenhuisKT. Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions. Amsterdam: Elsevier, 2009, p. 442.
9.
WilliamsMLLandelRFFerryJD. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J Am Chem Soc1955; 77(14): 3701–3707.
10.
ShawMTMacKnightWJ. Introduction to polymer viscoelasticity. New York: John Wiley & Sons, 2005.
11.
RotterGIshidaH. Dynamic mechanical analysis of the glass transition: curve resolving applied to polymers. Macromolecules1992; 25(8): 2170–2176.
12.
GalfordJEMcElhaneyJH. A viscoelastic study of scalp, brain, and dura. J Biomech1970; 3(2): 211–221.
TajvidiMFalkRHHermansonJC. Time–temperature superposition principle applied to a kenaf-fiber/high-density polyethylene composite. J Appl Polym Sci2005; 97(5): 1995–2004.
15.
FerryJD. Viscoelastic properties of polymers. New York: John Wiley & Sons, 1980.
16.
PrydeCA. IR studies of polyimides. I. Effects of chemical and physical changes during cure. J Polym Sci A Polym Chem1989; 27(2): 711–724.
17.
RoylanceD. Engineering viscoelasticity. Department of Materials Science and Engineering–Massachusetts Institute of Technology, Cambridge MA20012139: 1–37.
18.
CapodagliJLakesR. Isothermal viscoelastic properties of PMMA and LDPE over 11 decades of frequency and time: a test of time–temperature superposition. Rheol Acta2008; 47(7): 777–786.
19.
MacaubasPHPDemarquetteNR. Time-temperature superposition principle applicability for blends formed of immiscible polymers. Polym Eng Sci2002; 42(7): 1509–1519.
20.
PirkRRouleauLDortonaV. Modeling viscoelastic damping insertion in lightweight structures with generalized maxwell and fractional derivative models. In: Proceedings of ISMA conference, Belgium: Leuven, September 15–17.
21.
AliAFHassanMLWardAA. Processing, dynamic mechanical thermal analysis, and dielectric properties of barium titanate/cellulosic polymer nanocomposites. Polym Compos2015. doi: 10.1002/pc.23651
22.
GuedesRM (ed). Creep and fatigue in polymer matrix composites. New York: Elsevier, 2010.
AmdouniNSautereauHGerardJF. Epoxy composites based on glass beads. I. Viscoelastic properties. J Appl Polym Sci1992; 4510: 1799–1810.
25.
BessonovMIKuznetsovNPAdrovaNA. The relaxation mechanical properties of aromatic polyimides of varying structure. Polym Sci USSR1974; 16(9): 2425–2435.
26.
LongunJIrohJO. Nano-graphene/polyimide composites with extremely high rubbery plateau modulus. Carbon2012; 50(5): 1823–1832.
27.
DebyeP, Polar molecules. New York: The Chemical Catalog Co., Reprinted by Dover Publications, 1929.
28.
SondergaardKLyngaae-JorgensenJ. Rheo-Physics of Multiphase Polymer Systems: Characterization by Rheo-Optical Techniques. Lancaster: CRC Press, 1995.
29.
NgaiKLCasaliniRCapaccioliS. Do theories of the glass transition, in which the structural relaxation time does not define the dispersion of the structural relaxation, need revision?J Phys Chem B2005; 109(37): 17356–17360.
30.
StroblG. The physics of polymers: concepts for understanding their structures and behavior. 3rd ed. Berlin, Heidelberg: Springer-Verlag, 2007, p. 247.
31.
NinomiyaKFerryJD. Some approximate equations useful in the phenomenological treatment of linear viscoelastic data. J Colloid Sci1959; 14(1): 36–48.
32.
MenardKP, Dynamic mechanical analysis: a practical introduction. Boca Raton: CRC Press, 1999, p. 175.
