Several aromatic sulfonated copoly(ether–amide)s, based on the aromatic diamines 4,4′-(hexafluoroisopropylidene)bis(p-phenyleneoxy)-dianiline (HFD) and 2,4-diaminobenzensulfonic acid (DABS) and 4,4′-oxybis(benzoic acid) (OBA), were synthesized through a polycondensation reaction. The sulfonation degree was controlled by introducing different concentrations of 2,4-DABS from 40 mol% up to 80 mol%. Proton nuclear magnetic resonance validated the expected concentrations of sulfonic acid groups in the sulfonated aromatic copoly(ether–amide)s. Thermal decomposition of sulfonic groups was found to initiate at 280°C, while main chain decomposition initiates at 410°C. Proton conductivity between 30°C and 75°C was 19.0 and 45.0 mS/cm, respectively, for the copolymer with the highest concentration of sulfonic groups (–SO3H). Comparison with structurally similar sulfonated copolyamides and copoly(ether–amide)s indicates that these new sulfonated copoly(ether–amide)s based on 4,4′-OBA show improved mechanical properties, but a decrease in ion exchange capacity and proton conductivity.
PeighambardoustSJRowshanzamirSAmjadiM. Review of the proton exchange membranes for fuel cell applications. Int J Hydrogen Energ2010; 35: 9349–9384.
3.
KraytsbergAEin-EliY. Review of advanced materials for proton exchange membrane fuel cells. Energy Fuels2014; 28: 7303–7330.
4.
ShangXFangSMengY. Synthesis and characterization of poly (arylene ether ketone) with sulfonated fluorene pendants for proton exchange membrane. J Membr Sci2007; 297: 90–97.
5.
WilesKde DiegoCde AbajoJ. Directly copolymerized partially fluorinated disulfonated poly (arylene ether sulfone) random copolymers for PEM fuel cell systems: Synthesis, fabrication and characterization of membranes and membrane–electrode assemblies for fuel cell applications. J Membr Sci2007; 294: 22–29.
6.
GohYTPatelRImSJ. Synthesis and characterization of poly (ether sulfone) grafted poly (styrene sulfonic acid) for proton conducting membranes. Korean J Chem Eng2009; 26: 518–522.
7.
BenaventeJGarcíaJMRileyR. Sulfonated poly (ether ether sulfones): characterization and study of dielectrical properties by impedance spectroscopy. J Membr Sci2000; 175: 43–52.
8.
BasileAPaturzoLIulianelliA. Sulfonated PEEK-WC membranes for proton-exchange membrane fuel cell: effect of the increasing level of sulfonation on electrochemical performances. J Membr Sci2006; 281: 377–385.
9.
CaiHShaoKZhongS. Properties of composite membranes based on sulfonated poly (ether ether ketone) s (SPEEK)/phenoxy resin (PHR) for direct methanol fuel cells usages. J Membr Sci2007; 297: 162–173.
10.
LiXHaoXXuD. Fabrication of sulfonated poly (ether ether ketone ketone) membranes with high proton conductivity. J Membr Sci2006; 281: 1–6.
11.
ZhongSLiuCDouZ. Synthesis and properties of sulfonated poly (ether ether ketone ketone) containing tert-butyl groups as proton exchange membrane materials. J Membr Sci2006; 285: 404–411.
12.
HuZYinYChenS. Synthesis and properties of novel sulfonated (co)polyimides bearing sulfonated aromatic pendant groups for PEFC applications. J Polym Sci Part A: Polym Chem2006; 44: 2862–2872.
13.
ZhaiFGuoXFangJ. Synthesis and properties of novel sulfonated polyimide membranes for direct methanol fuel cell application. J Membr Sci2007; 296: 102–109.
14.
PuffrRŠebendaJ. On the structure and properties of polyamides. XXVII. The mechanism of water sorption in polyamides. J Polym Sci Part C: Polym Symp1967; 16: 79–93.
15.
TashiroKKobayashiMTadokoroH. Elastic moduli and molecular structures of several crystalline polymers, including aromatic polyamides. Macromolecules1977; 10: 413–420.
16.
TakayanagiMOgataTMorikawaM. Polymer composites of rigid and flexible molecules: system of wholly aromatic and aliphatic polyamides. J Macromol Sci Part B: Physics1980; 17: 591–615.
17.
JeongHJOishiYKakimotoMA. Synthesis and characterization of novel aromatic polyamides from 3, 4-bis (4-aminophenyl)-2, 5-diphenylfuran and aromatic diacid chlorides. J Polym Sci Part A: Polym Chem1990; 28: 3293–301.
18.
BenrabahDSanchezJArmandM. New polyamide-ether electrolytes. Electrochim Acta1992; 37: 1737–1741.
19.
BottinoFADi PasqualeGLeonardiN. Synthesis and properties of new poly (ether sulfone) amides. J Polym Sci Part A: Polym Chem1996; 34: 1305–1310.
20.
JinSMungaraPGonsalvesK. Synthesis of polyamides and polyureas containing leucine–tyrosine linkages. J Polym Sci Part A: Polym Chem1997; 35: 499–507.
21.
CuiWKerresJEigenbergerG. Development and characterization of ion-exchange polymer blend membranes. Sep Purif Technol1998; 14: 145–154.
22.
LiawDJLiawBY. Synthesis and characterization of new poly(amide–imide)s from 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene with various diamines. J Polym Sci Part A: Polym Chem1998; 36: 2301–2307.
23.
LufranoFSquadritoGPattiA. Sulfonated polysulfone as promising membranes for polymer electrolyte fuel cells. J Appl Polym Sci2000; 77: 1250–1256.
24.
Sosa-GonzálezWEPalí-CasanovaRAguilar-VegaM. Sulfonated aromatic copoly(ether–amide) membranes: preparation and characterization for possible application in polymer electrolyte membrane fuel cells. High Perform Polym2014; 26: 997–1006.
25.
LiawDJLiawBYChenJR. Synthesis and properties of new soluble polyamides derived from 2,2′-dimethyl-4,4′-bis(4-carboxyphenoxy)biphenyl. Macromolecules1999; 32: 6860–6863.
26.
FaghihiKHagibeygiM. New polyamides containing azobenzene unites and hydantoin derivatives in main chain: synthesis and characterization. Eur Polym J2003; 39: 2307–2314.
27.
Aguilar-VegaMPerez-PadillaYLoria-BastarracheaMI. Sulfonated membranes from random aramide copolyisophtalamides with increasing sulfonation degree: characterization for possible use as solid electrolyte in fuel cell. Polym Plast Technol Eng2015; 54: 711–718.
28.
PanJZhuLHanJ. Mechanically tough and chemically stable anion exchange membranes from rigid-flexible semi-interpenetrating networks. Chem Mater2015; 27: 6689–6698.
29.
ZhangYZhangSHuangX. Synthesis and properties of branched sulfonated polyimides for membranes in vanadium redox flow battery application. Electrochim Acta. 2016; 210: 308–320.
30.
ChangYLeeYBBaeC. Partially fluorinated sulfonated poly(ether amide) fuel cell membranes: influence of chemical structure on membrane properties. Polymers2011; 3: 222–235.
31.
VicenteMSGottifrediJCde la CampaJG. Water vapor sorption and diffusion in sulfonated aromatic polyamides. J Polym Sci Part B: Polym Phys2007; 45: 2007–2014.
32.
WangCShenBZhouY. Sulfonated aromatic polyamides containing nitrile groups as proton exchange fuel cell membranes. Inter J Hydrogen Energy2015; 40: 6422–6429.
33.
JoSGKimTHYoonSJ. Synthesis and investigation of random-structured ionomers with highly sulfonated multi-phenyl pendants for electrochemical applications. J Membr Sci2016; 510: 326–337.
34.
Aguilar-LugoCSantiago-GarcíaJLLoría-BastarracheaMI. Synthesis, characterization, and structure-property relationships of aromatic polyimides containing 4,4′-diaminotriphenylmethane. J Polym Res2016; 23: 49.
35.
Pérez-PadillaYSmitMAAguilar-VegaM. Preparation and characterization of sulfonated copolyamides based on poly(hexafluoroisopropylidene) isophthalamides for polymer electrolytic membranes. Ind Eng Chem Res2011; 50: 9617–9624.
36.
Carrera-FigueirasCAguilar-VegaM. Gas permeability and selectivity of benzophenone aromatic isophthalic copolyamides. J Polym Sci Part B: Polym Phys2007; 45: 2083–2096.
37.
Carrera-FigueirasCAguilar-VegaM. Gas permeability and selectivity of hexafluoroisopropylidene aromatic isophthalic copolyamides. J Polym Sci Part B: Polym Phys2005; 43: 2625–2638.
38.
YamazakiNMatsumotoMHigashiF. Studies on reactions of the N-phosphonium salts of pyridines. XIV. Wholly aromatic polyamides by the direct polycondensation reaction by using phosphites in the presence of metals salt. J Polym Sci Polym Chem Ed1975; 13: 1373–1380.
39.
ManeaCMulderM. Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell applications. J Membr Sci2002; 206: 443–453.
40.
MauritzKAMooreRB. State of understanding of Nafion. Chem Rev2004; 104: 4535–4585.
41.
FangJGuoXHaradaS. Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 1. Synthesis, proton conductivity, and water stability of polyimides from 4,4′-diaminodiphenylether-2,2′-disulfonic acid. Macromolecules2002; 35: 9022–9028.
42.
GuoXFangJWatariT. Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 2. Synthesis and proton conductivity of polyimides from 9,9-bis(4-aminophenyl)fluorene-2,7-disulfonic acid. Macromolecules2002; 35: 6707–6713.
43.
OkazakiYNagaokaSKawakamiH. Proton-conductive membranes based on blends of polyimides. J Polym Sci Part B: Polym Phys2007; 45: 1325–1332.
44.
WatariTFangJTanakaK. Synthesis, water stability and proton conductivity of novel sulfonated polyimides from 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid. J Membr Sci2004; 230: 111–120.
45.
GabrielliC.Identification of electrochemical processes by frequency response analysis. Solartron Instrumentation Group. Pub, Paris, France: Centre National de la Recherche Scientifique GR4 Physique des Liquides et Electrochimie Universite P et M Curie. 1984, p. 130.
46.
02 AD. Standard test method for tensile properties of thin plastic sheeting1. D 882 02. Pennsylvania: ASTM, p. 10.
47.
ShangXYShuDWangSJ. Fluorene-containing sulfonated poly(arylene ether 1,3,4–oxadiazole) as proton-exchange membrane for PEM fuel cell application. J Membr Sci2007; 291: 140–147.
48.
JoTSOzawaCHEagarBR. Synthesis of sulfonated aromatic poly(ether amide)s and their application to proton exchange membrane fuel cells. J Polym Sci Part A: Polym Chem2009; 47: 485–496.
49.
EikerlingMKornyshevAASpohrE. Proton-conducting polymer electrolyte membranes: water and structure in charge. Adv Polym Sci2008; 215: 15–54.
