The effects of composite fabrication, such as pre-curing, curing temperature, and cooling rate, were studied. In this work, the pre-curing was defined as heat treatment of Multi-Walled Carbon Nanotubes (MWNCTs) with Diglycidyl Ether of Bisphenol A (DGEBA) epoxy resin. Acid purified MWCNTs were characterized by Raman spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). The pre-curing facilitated bonding between MWCNTs and epoxy via the oxirane ring of DGEBA, which accelerated the curing process of epoxy and increased mechanical properties. The elevated curing temperature on the pre-cured sample further improved the composite’s mechanical properties by increasing interfacial bonding due to cross-linking. The rapid cooling using liquid nitrogen during pre-curing treatment prevented re-agglomeration of MWCNTs, showing smaller agglomerates and improving the mechanical properties. Agglomeration was characterized by scanning electron microscopy, while the bonding between MWCNTs and epoxy was examined by the length of fibre pull-out on the fracture surface. Tensile testing was deployed for mechanical properties characterization. The degree of cure was determined by FTIR and Differential Thermal Analysis (DTA).
TangJYeFXieY, et al.Improved mechanical and electromagnetic interference shielding performance of segregated UHMWPE/CNTs via microwave-assisted sintering. High Perform Polym2020; 32: 1140–1149.
2.
WangLYangBGuoY, et al.Synthesis of multielement phosphazene derivative and the study on flame-retardant properties of epoxy resin. High Perform Polym2020; 32: 1169–1180.
3.
HaritoCPorrasRBavykinDV, et al.Electrospinning of in situ and ex situ synthesized polyimide composites reinforced by titanate nanotubes. J Appl Polym Sci2017; 134: 1–9.
4.
HaritoCBavykinD V.YuliartoB, et al.Inhibition of polyimide photodegradation by incorporation of titanate nanotubes into a composite. J Polym Environ2019; 27: 1505–1515.
5.
HaritoCBavykinDVLightME, et al.Titanate nanotubes and nanosheets as a mechanical reinforcement of water-soluble polyamic acid: experimental and theoretical studies. Compos Part B Eng2017; 124: 54–63.
6.
IsaMRMHassanANordinNA, et al.Mechanical, rheological and thermal properties of montmorillonite-modified polyhydroxybutyrate composites. High Perform Polym2020; 32: 192–200.
7.
FanBZhaoYPutraBR, et al.Photoelectroanalytical oxygen detection with titanate nanosheet – platinum hybrids immobilised into a polymer of intrinsic microporosity (PIM-1). Electroanalysis2020; 32: 2756–2763.
8.
SankarSParvathiKRamesanM. Structural characterization, electrical properties and gas sensing applications of polypyrrole/Cu-Al 2 O 3 hybrid nanocomposites. High Perform Polym2020; 32: 719–728.
9.
FengDXuDWangQ, et al.Highly stretchable electromagnetic interference (EMI) shielding segregated polyurethane/carbon nanotube composites fabricated by microwave selective sintering. J Mater Chem C2019; 7: 7938–7946.
10.
XuDChenWLiuP. Enhanced electromagnetic interference shielding and mechanical properties of segregated polymer/carbon nanotube composite via selective microwave sintering. Compos Sci Technol2020; 199: 108355.
11.
MunirA.Microwave radar absorbing properties of multiwalled carbon nanotubes polymer composites: a review. Adv Polym Technol2017; 36: 362–370.
12.
KausarARafiqueIMuhammadB. Review of applications of polymer/carbon nanotubes and epoxy/CNT composites. Polym Plast Technol Eng2016; 55: 1167–1191.
13.
AtesBKoytepeSUluA, et al.Chemistry, structures, and advanced applications of nanocomposites from biorenewable resources. Chemical Reviews2020; 120: 9304–9362.
14.
BregarTAnDGharavianS, et al.Carbon nanotube embedded adhesives for real-time monitoring of adhesion failure in high performance adhesively bonded joints. Sci Rep2020; 10: 16833.
15.
GaoAChenSZhaoS, et al.The interaction between N, N-dimethylacrylamide and pristine graphene and its role in fabricating a strong nanocomposite hydrogel. J Mater Sci2020; 55: 7652–7664.
16.
HaritoCBavykinDVYuliartoB, et al.Polymer nanocomposites having a high filler content: synthesis, structures, properties, and applications. Nanoscale2019; 11: 4653–4682.
17.
ShuklaMKSharmaK. Measurement of dispersion and homogeneity of functionalized graphene/CNT hybrid epoxy composite. SN Appl Sci2019; 1: 1–7.
18.
KimHWangMLeeSK, et al.Tensile properties of millimeter-long multi-walled carbon nanotubes. Sci Rep2017; 7: 9512.
19.
MaP-CMoS-YTangB-Z, et al.Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites. Carbon2010; 48: 1824–1834.
20.
RathoreDKPrustyRKRayBC. Mechanical, thermomechanical, and creep performance of CNT embedded epoxy at elevated temperatures: an emphasis on the role of carboxyl functionalization. J Appl Polym Sci2017; 134: 44851.
21.
SharmaKSen KaushalyayanKShuklaM. Pull-out simulations of interfacial properties of amine functionalized multi-walled carbon nanotube epoxy composites. Comput Mater Sci2015; 99: 232–241.
22.
JudawisastraHHaritoCAbdullahAHD. Effect of amide functionalization and precuring on tensile properties of MWCNT/epoxy nanocomposites. Macromol Symp2015; 353: 88–95.
23.
ProlongoSGGudeMRUreñaA. Improving the flexural and thermomechanical properties of amino-functionalized carbon nanotube/epoxy composites by using a pre-curing treatment. Compos Sci Technol2011; 71: 765–771.
24.
CiLBaiJ. The reinforcement role of carbon nanotubes in epoxy composites with different matrix stiffness. Compos Sci Technol2006; 66: 599–603.
25.
DavisCSOrloffNDWoodcockJW, et al.Cure temperature influences composite electrical properties by carbon nanotube-rich domain formation. Compos Sci Technol2016; 133: 23–32.
26.
MgbemenaCOLiDLinMF, et al.Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: a review of scientific challenges. Composites Part A: Appl Sci Manuf2018; 115: 88–103.
27.
NikolicGZlatkovicSCakicM, et al.Fast Fourier transform IR characterization of epoxy GY systems crosslinked with aliphatic and cycloaliphatic EH polyamine adducts. Sensors2010; 10: 684–696.
28.
ScherzerT. Characterization of diol modified epoxy resins by near- and mid-infrared spectroscopy. J Appl Polym Sci1994; 51: 491–502.
29.
RubabZAfzalASiddiqiHM, et al.Preparation, characterization, and enhanced thermal and mechanical properties of epoxy-titania composites. Sci World J2014; 2014: 515739.
30.
RoySDasTMingY, et al.Specific functionalization and polymer grafting on multiwalled carbon nanotubes to fabricate advanced nylon 12 composites. J Mater Chem A2014; 2: 3961.
31.
SamantaSKFritschMScherfU, et al.Conjugated polymer-assisted dispersion of single-wall carbon nanotubes: the power of polymer wrapping. Acc Chem Res2014; 47: 2446–2456.
32.
LiuLEtikaKCLiaoK-S, et al.Comparison of covalently and noncovalently functionalized carbon nanotubes in epoxy. Macromol Rapid Commun2009; 30: 627–632.
33.
FujigayaTNakashimaN. Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants. Sci Technol Adv Mater2015; 16: 024802.
34.
IrurzunVMRuizMPResascoDE. Raman intensity measurements of single-walled carbon nanotube suspensions as a quantitative technique to assess purity. Carbon2010; 48: 2873–2881.
35.
JorioAPimentaMAFilhoAGS, et al.Characterizing carbon nanotube samples with resonance Raman scattering. New J Phys2003; 5: 139–139.
36.
HeiseHMKuckukROjhaAK, et al.Characterisation of carbonaceous materials using Raman spectroscopy: a comparison of carbon nanotube filters, single- and multi-walled nanotubes, graphitised porous carbon and graphite. J Raman Spectrosc2009; 40: 344–353.
37.
LeeSPengJ-WLiuC-H. Probing plasma-induced defect formation and oxidation in carbon nanotubes by Raman dispersion spectroscopy. Carbon2009; 47: 3488–3497.
38.
CoatesJ. Interpretation of infrared spectra, a practical approach. In: MeyersRAMcKelvyML (eds) Encyclopedia of Analytical Chemistry. Chichester, UK: John Wiley & Sons, Ltd, 2006, pp. 1–23.
39.
YanLChouwNHuangL, et al.Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites. Constr Build Mater2016; 112: 168–182.
40.
GoyatMJaglanVTomarV, et al.Superior thermomechanical and wetting properties of ultrasonic dual mode mixing assisted epoxy-CNT nanocomposites. High Perform Polym2019; 31: 32–42.
41.
VyazovkinSSbirrazzuoliN. Mechanism and kinetics of epoxy-amine cure studied by differential scanning calorimetry. Macromolecules1996; 29: 1867–1873.
42.
XiaLZuoLZhaS, et al.Kinetic research on low-temperature cure of epoxy adhesive. Int J Adhes Adhes2014; 50: 255–264.
43.
ShenZLiuYLiJ, et al.Preparation of benzoxazine-modified halloysite nanotubes and its application on epoxy/benzoxazine composites. High Perform Polym2020; 32: 1122–1130.
44.
GeDYangLLiY, et al.Hydrophobic and thermal insulation properties of silica aerogel/epoxy composite. J Non Cryst Solids2009; 355: 2610–2615.
45.
MontazeriAMadahDShormastiNK. The comparison of cure behavior of epoxy and multi-wall carbon nanotube/epoxy composites. J Therm Anal Calorim2016; 124: 1441–1448.
SaebMRBakhshandehEKhonakdarHA, et al.Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: a review. Sci World J2013; 2013: 703708.
48.
AllaouiAEl BouniaN. How carbon nanotubes affect the cure kinetics and glass transition temperature of their epoxy composites? – A review. Express Polym Lett2009; 3: 588–594.
49.
XieHLiuBYuanZ, et al.Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry. J Polym Sci Part B Polym Phys2004; 42: 3701–3712.
50.
NouriNZiaei-RadS. A molecular dynamics investigation on mechanical properties of cross-linked polymer networks. Macromolecules2011; 44: 5481–5489.
51.
MengQWangZ. Theoretical model of fiber debonding and pull-out in unidirectional hybrid-fiber-reinforced brittle-matrix composites. J Compos Mater2015; 49: 1739–1751.
52.
XiangDHarkin-JonesELintonD. Effect of cooling rate on the properties of high density polyethylene/multi-walled carbon nanotube composites. In: AIP Conference Proceedings. American Institute of Physics, 2015; 1664: 070005.
53.
ShaoYXuFLiuW, et al.Influence of cryogenic treatment on mechanical and interfacial properties of carbon nanotube fiber/bisphenol-F epoxy composite. Compos Part B Eng2017; 125: 195–202.
54.
ParkSHBandaruPR. Improved mechanical properties of carbon nanotube/polymer composites through the use of carboxyl-epoxide functional group linkages. Polymer2010; 51: 5071–5077.
55.
JiaYChenZYanW. A numerical study on carbon nanotube pullout to understand its bridging effect in carbon nanotube reinforced composites. Compos Part B Eng2015; 81: 64–71.
