N, N, N′, N′ -Tetrapropargyl-p, p′-diaminodiphenylmethane (TPDDM) is synthesized and used to blended with 4,4′-bismaleimide diphenylmethane (BDM) as propargyl compound in a molten state to obtain a TPDDM modified bismaleimide (BTP) resin. The BTP resins are cured under electron-beam (EB) irradiation as well as heat. The cure degree and reactions of BTP resins are studied. The thermal stability and mechanical properties of the cured BTP resins are further investigated. The results show that the BTP resins can be cured under EB irradiation and have over 82% degree of cure, which increases with the increase of EB irradiation dose. The cure reactions of EB-cured BTP resin are similar to that of heat-cured BTP resin. The temperature at 5% weight loss (Td5) and mechanical properties of the cured BTP resins are close analogies between EB and heat cure processes although the cure degrees of EB-cured BTP resins are lower. The glass transition temperature (Tg) and flexural modulus of the EB-cured BTP resin are higher than that of the heat-cured BTP resin. The Tg of the EB-cured BTP resin can reach over 385°C. The TPDDM-modified BDM is a candidate bismaleimide resin for the EB irradiation curing process in advanced manufacturing technology.
DaoBHawthorneDGHodgkinJH, et al.Preparation and characterization of some novel bismaleimide monomers and polymers based on diaminobisimides. High Perform Polym1996; 8: 243–263.
2.
IredaleRJWardCHamertonI. Modern advances in bismaleimide resin technology: a 21st century perspective on the chemistry of addition polyimides. Prog Polym Sci2017; 69: 1–21.
3.
JavadiAMehrHSSobaniM, et al.Cure-on-command technology: a review of the current state of the art. Prog Org Coating2016; 100: 2–31.
4.
BhattacharyaA. Radiation and industrial polymer. Prog Polym Sci2000; 25: 371–401.
5.
RaghavanJ. Evolution of cure, mechanical properties, and residual stress during electron beam curing of a polymer composite. Compos Part A: Appl S2009; 40: 300–308.
6.
KinstleJF. Electron-beam curing of polymeric materials. In: HoyleCEKinstleJF (eds) ACS Symposium Series (Radiation curing of polymeric materials). Washington: American Chemical Society, 1990.
SalehoonEAhmadiSJRazaviSM, et al.Thermal and corrosion resistance properties of unsaturated polyester/clay nanocomposites and the effect of electron beam irradiation. Polym Bull2017; 74: 1629–1647.
9.
CrivelloJVFanMBiD. The electron beam-induced cationic polymerization of epoxy resins. J Appl Polym Sci1992; 44: 9–16.
10.
FoedingerRReaDGrandeR. Electron beam curing of filament wound composite pressure vessels. Int SAMPE Symp Exhib. 1999; 44: 248–258.
11.
CoqueretXKrzeminskiMPonsaudP, et al.Recent advances in electron beam curing of carbon fiber-reinforced composites. Radiat Phys Chem2009; 78: 557–561.
12.
AblizDDuanYZhaoX, et al.Low-energy electron beam cured tape placement for out-of-autoclave fabrication of advanced polymer composites. Compos Part A: Appl S2014; 65: 73–82.
13.
ZhaoXDuanYLiD, et al.Investigation of curing characteristics of carbon fiber/epoxy composites cured with low-energy electron beam. Polym Compos2015; 36: 1731–1737.
14.
ZhangJDuanYZhaoX, et al.Irradiation dose control for polymer-matrix composites fabricated by in situ curing with low-energy electron beam. J Appl Polym Sci2017; 134: 44944.
KorenevS. Electron beam curing of composites. Vacuum2001; 2: 233–236.
17.
BerejkaAJEberleC. Electron beam curing of composites in North America. Radiat Phys Chem2002; 63: 551–556.
18.
LiYMorganRJTschenF, et al.Electron-beam curing of bismaleimide-reactive diluent resins. J Appl Polym Sci2004; 94: 2407–2416.
19.
Grenier-LoustalotMFDenizotVBeziersD. Study of the polymerization of high-performance polymers by electrons and X-rays: 2. The case of bismaleimide/N-vinylpyrrolidone. High Perform Polym1995; 1: 181–217.
20.
FurutaniHIdaJNaganoH. Novel propargylether-terminated ester-imide prepolymers: III. Thermoset/thermoset blend prepolymers as matrix resins for composites. High Perform Polym2000; 12: 489–496.
21.
LiuFLiWWeiL, et al.Bismaleimide modified bis propargyl ether bisphenol A resin: synthesis, cure, and thermal properties. J Appl Polym Sci2006; 102: 3610–3615.
22.
LiuFLiWWeiL, et al.Blended resins based on a new propargyl-functional resin: synthesis, cure, and thermal properties. J Appl Polym Sci2006; 102: 4207–4212.
23.
ZhouJWangJJinK, et al.s-Triazine-based functional monomers with thermocrosslinkable propargyl units: synthesis and conversion to the heat-resistant polymers. Polymer2016; 102: 301–307.
24.
ZhangHWangLYuanQ, et al.Preparation and properties of bismaleimide resin blended with alkynyl-terminated modifiers. High Perform Polym2021; 33: 1192–1204.
25.
GeMLiangGGuA. A facile strategy and mechanism to achieve biobased bismaleimide resins with high thermal-resistance and strength through copolymerizing with unique propargyl ether-functionalized allyl compound. React Funct Polym2023; 186: 105570.
26.
HayASBolonDALeimerKR. Photosensitization of polyacetylenes. J Polym Sci Part A-11970; 8: 1022–1023.
27.
RozenbergBADzhavadyanEAMorganRJ, et al.The polyaddition, chain, and polycondensation mechanisms of formation of networks based on bismaleimides. Macromol Symp2001; 171: 87–96.
28.
WanLQLuoYHXueL, et al.Preparation and properties of a novel polytriazole resin. J Appl Polym Sci2007; 104: 1038–1042.
29.
ZhangYWangLYuanQ, et al.Bismaleimide resin modified by a propargyl substituted aromatic amine with ultrahigh glass transition temperature, thermomechanical stability and intrinsic flame retardancy. React Funct Polym2023; 193: 105740.
30.
Grenier-LoustalotMFDa CunhaL. Study of molten-state polymerization of bismaleimide monomers by solid-state 13C n.m.r. and FTi.r. Polymer1998; 39: 1833–1843.
31.
PhelanJCSungCSP. Cure characterization in bis(maleimide)/diallylbisphenol A resin by fluorescence, FT-IR, and UV-reflection spectroscopy. Macromolecules1997; 30: 6845–6851.
32.
GuastiFRosiE. Low energy electron beam curing for thick composite production. Compos Part A-Appl S1997; 28: 965–969.
33.
PurbayaMKobayashiTThamrongsiripakN, et al.Electron beam irradiation for enhancing the properties of natural rubber latex. Radiat Phys Chem2023; 212: 111193.
34.
PinaevaU. Effect of electron-beam irradiation on poly(2-hydroxyethyl methacrylate). Eur Polym J2023; 189: 111959.
35.
CoqueretX. Obtaining high performance polymeric materials by irradiation. In: Radiation chemistry: from basics to applications in material and life sciences. Les Ulis: EDP Sciences, 2008.
36.
NishidaMHongoATakaharaH, et al.Effects of electron beam irradiation on hypervelocity impact behavior of carbon fiber reinforced plastic plates. J Compos Mater2021; 55: 4295–4304.
37.
NechausovSSAleksanovaAAMorozovOS, et al.Low-melting phthalonitrile monomers containing maleimide group: synthesis, dual-curing behavior, thermal and mechanical properties. React Funct Polym2021; 164: 104932.
38.
FomineSSanchezSOgawaT. Diacetylene-containing polymers VII. synthesis and characterization of new diacetylene-containing polyesters and copolyesters derived from dipropargyl-1, 10-decanate, dipropargyl terephthalate, 4,4′-dipropargyloxy diphenyl, and 4,4′-bis[(5-carbopropargyloxy)pentoxy]diphenyl. Polym J1995; 27: 165–172.
39.
LinKFChenJ-C. Curing, compatibility, and fracture toughness for blends of bismaleimide and a tetrafunctional epoxy resin. Polym Eng Sci1996; 36(2): 211–217.
