An improved particle swarm fuzzy PID for adaptive control of temperature in CFRP induction heating

Abstract

Graphical abstract

An Improved Particle Swarm Optimization-Based Fuzzy PID Control Algorithm(IPSO-PID) is used to address the problem of poor CFRP molding quality caused by the inadequate adaptive capability and slow response time of the induction heating temperature control system during the curing process of carbon fiber reinforced polymer (CFRP) by electromagnetic induction heating. The three PID parameters are optimized and self-adjusted using the improved algorithm. This algorithm combines the advantages of PSO and Fuzzy-PID algorithms. It guarantees the control accuracy and search performance of the improved algorithm during the iterative process and prevents the improved algorithm from settling for the local optimal solution. The outcomes of simulation and experimentation demonstrate that the algorithm significantly improves the controller’s capacity for adaptation and shortens the adjustment period. In contrast to the conventional PID algorithm, this algorithm is better suited for controlling the temperature of electromagnetic induction heating CFRP because it reduces overshoot and steady-state error more than it does.

Keywords

CFRP electromagnetic induction heating temperature control adaptive control

Get full access to this article

View all access options for this article.

References

Grouve

Vruggink

Sacchetti

, et al. Induction heating of UD C/PEKK cross-ply laminates. Procedia Manuf 2020; 47: 29–35.

Lucía

Maussion

Dede

, et al. Induction heating technology and its applications: past developments, current technology, and future challenges. IEEE Trans Ind Electron 2013; 61(5): 2509–2520.

Segreto

Bottillo

Palmieri

, et al. Ultrasonic evaluation of induction heat treatment applied to thermoplastic matrix CFRP. Procedia CIRP 2020; 88: 467–472.

Choudhury

Debnath

. A review of the research and advances in electromagnetic joining of fiber-reinforced thermoplastic composites. Polym Eng Sci 2019; 59(10): 1965–1985.

Dormeier

. Extruder control. IFAC Proc Volumes 1980; 13(12): 551–560.

Meshram

Kanojiya

. Tuning of PID controller using Ziegler-Nichols method for speed control of DC motor. In: IEEE-international conference on advances in engineering, science and management (ICAESM-2012), Nagapattinam, India, 30–31 March 2012, pp.117–122. New York: IEEE.

Duan

Wang

. Novel approach to nonlinear PID parameter optimization using ant colony optimization algorithm. J Bionic Eng 2006; 3: 73–78.

Howell

Best

. On-line PID tuning for engine idle-speed control using continuous action reinforcement learning automata. Control Eng Pract 2000; 8(2): 147–154.

Aghaei

Onat

Eksin

, et al. Fuzzy PID controller design using Q-learning algorithm with a manipulated reward function. In: 2015 European control conference (ECC), Linz, Austria, 15–17 July 2015, pp.2502–2507. New York: IEEE.

10.

Ravari

Taghirad

. A novel hybrid Fuzzy-PID controller for tracking control of robot manipulators. In: 2008 IEEE international conference on robotics and biomimetics, Bangkok, Thailand, 22–25 February 2009, pp.1625–1630. New York: IEEE.

11.

Karasakal

Yeşil

Güzelkaya

, et al. Implementation of a new self-tuning fuzzy PID controller on PLC. Turk J Electr Eng Comput Sci 2005; 13(2): 277–286.

12.

Luo

. Design and simulation of fuzzy-PID controller based on mixed injection molding machine. In: 2010 2nd international workshop on intelligent systems and applications, Wuhan, China, 22–23 May 2010, pp.1–3. New York: IEEE.

13.

Hou

Wang

. Induction heating furnace temperature control based on the fuzzy PID. Appl Mech Mater 2012; 217–219: 2463–2466.

14.

Chang

Chiang

Tai

. A modified self-tuning fuzzy logic temperature controller for metal induction heating. Rev Sci Instrum 2020; 91(6): 064905.

15.

Chang

. Nonlinear system identification and control using a real-coded genetic algorithm. Appl Math Model 2007; 31(3): 541–550.

16.

Pourmostaghimi

Zadshakoyan

Khalilpourazary

, et al. A hybrid particle swarm optimization and recurrent dynamic neural network for multi-performance optimization of hard turning operation. Artif Intell Eng Des Anal Manuf 2022; 36: e28.

17.

Qazani

MRC

Pourmostaghimi

Moayyedian

, et al. Estimation of tool–chip contact length using optimized machine learning in orthogonal cutting. Eng Appl Artif Intell 2022; 114: 105118.