Large-Eddy simulation of rim seal ingestion

Unsteady flow dynamics in turbine rim seals are known to be complex and attempts accurately to predict the interaction of the mainstream flow with the secondary air system cooling flows using computational fluid dynamics (CFD) with Reynolds-averaged Navier–Stokes (RANS) turbulence models have proved difficult. In particular, published results from RANS models have over-predicted the sealing effectiveness of the rim seal, although their use in this context continues to be common. Previous studies have ascribed this discrepancy to the failure to model flow structures with a scale greater than the one which can be captured in the small-sector models typically used. This article presents results from a series of Large-Eddy Simulations (LES) of a turbine stage including a rim seal and rim cavity for, it is believed by the authors, the first time. The simulations were run at a rotational Reynolds number Re_θ = 2.2 × 10⁶ and a main annulus axial Reynolds number Re_x = 1.3 × 10⁶ and with varying levels of coolant mass flow. Comparison is made with previously published experimental data and with unsteady RANS simulations. The LES models are shown to be in closer agreement with the experimental sealing effectiveness than the unsteady RANS simulations. The result indicates that the previous failure to predict rim seal effectiveness was due to turbulence model limitations in the turbine rim seal flow. Consideration is given to the flow structure in this region.