Experimental investigation of forced and wind assisted domestic solar hot water systems

Abstract

This paper investigates a proposal to replace the electrically operated pump of a forced circulation solar hot water system with a windmill-driven pump. A two-stage centrifugal pump driven by a vertical axis windmill with a Savonius type rotor is added to the fluid loop. Tests on the forced circulation system (FCS) mode, with two different pump speeds, driven by an electrically operated pump or in wind-assisted system (WAS) mode were carried out during January, April, July, and October 2009. Test results obtained on clear days are reported. A daily average thermal efficiency level of between 30 and 37 per cent was obtained in FCS mode and it was between 31 and 36 per cent in WAS mode. With higher wind velocities, higher collector flow rates and higher efficiencies are obtained. In general, the performance of a domestic hot water system operating in WAS mode is on a par with that obtained in FCS mode. The WAS mode is a viable alternative to FCS mode in remote areas where the supply of electricity is problematic.

Keywords

solar hot water system forced circulation system windmill-driven pump

Get full access to this article

View all access options for this article.

References

Thirugnanasambandam

Iniyan

Ranko

A review of solar thermal technologies. Renew. Sustain. Energy Rev., 2010, 14, 312–322.

Abdul-jabbar

N. K.

Forced versus natural circulation solar water heaters: a comparative performance study. Renew. Energy, 1988, 14(1–4), 77–82.

Abd-al Zahra

H. A. A.

Joudi

K. A.

An experimental investigation into the performance of a domestic thermosyphon solar water heater under varying operating conditions. Energy Convers. Mgment., 1984, 24(3), 205–214.

Fanney

A. H.

Klein

S. A.

Thermal performance comparisons for solar hot water systems subjected to various collector and heat exchanger flow rates. Solar Energy40(1), 1–11.

Jaisankar

Radhakrishnan

T. K.

Sheeba

K. N.

Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system ﬁtted with spacer the trailing edge of twisted tapes. Appl. Thermal Engng., 2009, 29, 1224–1231.

AlShamaileh

Testing of a new solar coating for solar water heating applications. Solar Energy, 2010, 84, 1637–1643.

Sopian

Zulkifli

Sahari

Othman

M. Y.

Thermal performance of thermoplastic natural rubber collector. J. Mater. Process. Technol., 2002, 123, 179–184.

Allen

S. R.

Hammond

G. P.

Harajli

H. A.

McManus

M. C.

Winnett

A. B.

Integrated appraisal of a solar hot water system. Energy, 2010, 35, 1351–1362.

Muhsin

Cabeza

L. F.

Mazman

Mehling

Nogues

Evliya

Paksoy

H. O.

Utilization of phase change materials in solar domestic hot water systems. Renew. Energy, 2009, 34, 1639–1643.

10.

Talmatsky

Kribus

PCM storage for solar DHW: an unfulﬁlled promise?. Solar Energy, 2008, 82, 861–869.

11.

Tripanagnostopoulos

Aspects and improvements of hybrid photovoltaic/thermal solar energy systems. Solar Energy, 2007, 81, 1117–1131.

12.

Chow

T. T.

A review on photovoltaic/thermal hybrid solar technology. Appl. Energy87, 365–379.

13.

Grassie

MacGregor

Muneer

Kubie

Design of a PV driven low flow solar domestic hot water system and modeling of the system collector outlet temperature. Energy Convers. Mgment., 2002, 43, 1063–1078.

14.

Al-Ibrahim

A. M.

Beckman

W. A.

Klein

S. A.

Mitchell

J. W.

Design procedure for selecting an optimum photovoltaic pumping system in a solar domestic hot water system. Solar Energy, 1998, 64(4–6), 227–239.

15.

Kalogirou

S. A.

Tripanagnostopoulos

Hybrid PV/T solar systems for domestic hot water and electricity production. Energy Convers. Mgment., 2006, 47, 3368–3382.

16.

Al-Bahadly

Building a wind turbine for rural home. Energy Sustain. Develop., 2009, 13, 159–165.

17.

Holman

J. P.

Experimental methods for engineers, 19844th ednMcGraw Hill, Auckland, New Zealand).