Dimensional analysis and a potential classification algorithm for prediction of wear in friction stir welding of metal matrix composites

Abstract

The objective of this study is to develop a dimensionless parameter which can be used to estimate the amount of volumetric wear, a friction stir welding tool will experience in joining a metal matrix composite. Metal matrix composites are strong, lightweight materials consisting of a metal matrix (often an aluminum alloy) reinforced with ceramic particles or fibers. This study derives a dimensionless number based on three major process variables in friction stir welding: rotation speed, traverse speed, and length of weld. This number is correlated with wear data collected from experiments in which a steel friction stir welding tool was used to join Al 359/SiC/20p. The use of the dimensionless number as a classifier for tool condition is also evaluated.

Keywords

Friction stir welding metal matrix composites dimensional analysis tool wear

Get full access to this article

View all access options for this article.

References

Rabinowicz

. Friction and wear of materials. New York, NY: John Wiley & Sons, 1965.

Thomas WM, Nicholas ED, Needham JC, et al. Friction stir welding. US Patent 5460317, USA, 24 October 1995.

NASA. ‘Friction stir welding’, Space Shuttle Technology Summary, http://www.nasa.gov/centers/marshall/pdf/104835main_friction.pdf (2001, accessed October 2009).

Stellwag WL and TJ Lienert. Friction stir welding of aluminum metal matrix composites progress report, 2001 Columbus: Edison Welding Institute.

Storjohann

Barabash

Babu

. Fusion and friction stir welding of aluminum metal matrix composites. Metall Mater Trans A 2005; 36A: 3237–3247.

Prado

Murr

Soto

. Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al₂O₃MMC. Mater Sci Eng 2003; 349: 156–165.

Prado

Murr

Shindo

. Tool wear in the friction-stir welding of aluminum alloy 6061+Al₂O₃: a preliminary study. Scriptamaterialia 2001; 45: 75–80.

Prater

Strauss

Cook

. Statistical modeling and prediction of wear in friction stir welding of a metal matrix composite (Al 359/SiC/20p). J Manuf Technol Res 2010; 2: 1–13.

Nunes AC, Bernstein EL and McClure JC. A rotating plug model for friction stir welding. Presented at 81^st American welding society annual convention, Chicago, IL, USA, 26–28 April 2000.