Analysis of heat transfer across phase change material filled reinforced cement concrete roof for thermal management

Abstract

Analysis of heat transmission across three roof structures, namely, bare reinforced cement concrete roof, reinforced cement concrete roof with weathering coarse and reinforced cement concrete roof with phase change material above reinforced cement concrete are analysed. A transient numerical procedure is developed. The numerical procedure is validated against the available experimental data. The simulation is carried out on 365 days of year for these three roofs. The phase change material melts from 8 to 18 h and solidifies during the rest of the day. From March to August, the net heat entering into the room per day is positive, thus more and more phase change material melts and becomes liquid. The liquid portion of phase change material increases from March to August. During September to February, there is a net heat rejection per day, thus the melted phase change material becomes solid progressively, and at the end of February, almost all phase change material has become solid. Thus, there is melting cycle on daily basis and over the year. It takes care of all the external climatic variations and keeps the roof bottom surface temperature almost constant and closes to room air temperature. On yearly basis, about 56% reduction in heat transmission into the room is obtained with phase change material roof when compared to the conventional weathering coarse laid roof.

Keywords

Heat transmission building roof reinforced cement concrete phase change material weathering coarse energy conservation

Get full access to this article

View all access options for this article.

References

Hawes

Feldman

. Absorption of phase change materials in concrete. Sol Energy Mater Sol Cells 1992; 27: 91–101.

Arkar C and Medved S. Enhanced solar assisted building ventilation system using sphere encapsulated PCM thermal heat storage. Sol Energy 2005; 78(2): 341–349.

Stritih U and Novak P. Thermal storage of solar energy in the wall for building ventilation. In: Proceedings of the second workshop of IEA, ECESIA Annex 17, advanced thermal energy storage techniques-feasibility studies and demonstration projects, Ljubljana, Slovenia, 3–5 April 2002. IEA ECESA.

Feustel HE and Stetiu C. Thermal performance of phase change wallboard for residential cooling application. Report no. LBL-38320, 1997. Berkeley, CA: Lawrence Berkeley National laboratory.

Neeper

. Thermal dynamics of wall board with latent heat storage. Solar Energy 2000; 68: 393–403.

Athienitis

Liu

Hawes

. Investigation of the thermal performance of a passive solar test-room with wall latent heat storage. Build Environ 1997; 32: 405–410.

Lee

Hawes

Banu

. Control aspects of latent heat storage and recovery in concrete. Sol Energy Mater Sol Cells 2000; 62: 217–237.

Hadjieva

Stoykov

Filipova

. Composite salt-hydrate concrete system for building energy storage. Renewable Energy 2000; 19: 11–15.

Mehling H, Krippner R and Hauer A. Research project on PCM in wood-light weight- concrete. In: Proceedings of the second workshop of IEA ECES IA Annex 17, advanced thermal energy storage techniques-feasibility studies and demonstration projects, Ljubljana, Slovenia, 3–5 April 2002. IEA ECESA.

10.

Zhang

Lin

Yang

. Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings. Energy Build 2006; 38: 1262–1269.

11.

Cabeza

Castellon

Nogues

. Use of microencapsulated PCM in concrete walls for energy savings. Energy Build 2007; 39: 113–119.

12.

Griffiths

Eames

. Performance of chilled ceiling panels using phase change material slurries as the heat transport medium. Appl Therm Eng 2007; 27: 1756–1760.

13.

Pasupathy

Velraj

. Effective of double layer phase change material in building roof for year round thermal management. Energy Build 2008; 40: 193–203.

14.

Al-Sanea

. Thermal performance of building roof elements. Build Environ 2002; 37: 665–675.