A numerical model is formulated to analyze the tooth contact dynamic load distribution and dynamic transmission error of a pair of spur gears under the influence of bearing elasticity and gearbox assembly errors. In the proposed model, the deformation of the tooth is computed by applying a combination of finite elements and contact mechanics. The elasticity of the bearings is represented with infinitesimal linear spring elements, while the shafts and gears except the teeth that are in engagement are assumed to be rigid bodies. Applying those assumptions, three sets of highly coupled governing equations representing the meshing teeth flexible behavior, gear-bearing assembly translation dynamics and gear rotation dynamics are derived. The resultant model is then used to predict the dynamical behaviors of the geared rotor system, tooth contact dynamic load, and dynamic transmission error. A set of parametric studies is also performed to analyze the gear dynamic response.
LitvinFLLuJTownsendDP. Computerized simulation of meshing of conventional helical involute gears and modification of geometry. Mech Mach Theory1999; 34: 123–147.
2.
LitvinFLDonnoMDPengA. Integrated computer program for simulation of meshing and contact of gear drives. Comput Meth Appl Mech Eng2000; 181: 71–85.
3.
LitvinFLLianQKapelevichAL. Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis. Comput Meth Appl Mech Eng2000; 188: 363–390.
4.
ArgyrisJDonnoMDLitvinFL. Computer program in Visual Basic language for simulation of meshing and contact of gear drives and its application for design of worm gear drive. Comput Meth Appl Mech Eng2000; 189: 595–612.
5.
LitvinFLArgentieriGDonnoMD. Computerized design, generation and simulation of meshing and contact of face worm-gear drives. Comput Meth Appl Mech Eng2000; 189: 785–801.
6.
LitvinFLNavaAFanQ. New geometry of face worm gear drives with conical and cylindrical worms: generation, simulation of meshing, and stress analysis. Comput Meth Appl Mech Eng2002; 191: 3035–3054.
7.
LitvinFLFuentesAGonzalez-PerezI. New version of Novikov-Wildhaber helical gears: computerized design. simulation of meshing and stress analysis. Comput Meth Appl Mech Eng2002; 191: 5707–5740.
8.
FuentesALitvinFLMullinsBR. Design and stress analysis of low-noise adjusted bearing contact spiral bevel gears. ASME J Mech Des2002; 124: 524–532.
9.
LitvinFLVecchiatoDDemenegoA. Design of one stage planetary gear train with improved conditions of load distribution and reduced transmission errors. ASME J Mech Des2002; 124: 745–752.
10.
LitvinFLShevelevaGIVecchiatoD. Modified approach for tooth contact analysis of gear drives and automatic determination of guess values. Comput Meth Appl Mech Eng2005; 194: 2927–2946.
11.
ZhangYFangZ. Analysis of tooth contact and load distribution of helical gears with crossed axes. Mech Mach Theory1999; 34: 41–57.
12.
WangSZhanDLiuH. Tooth contact analysis of toroidal involute worm mating with involute helical gear. Mech Mach Theory2002; 37: 685–691.
13.
TsengRTTsayCB. Contact characteristics of cylindrical gears with curvilinear shaped teeth. Mech Mach Theory2004; 39: 905–919.
14.
LiuCCTsayCB. Mathematical models and contact simulations of concave beveloid gears. ASME J Mech Des2002; 124: 753–760.
VogelOGriewankABarG. Direct gear tooth contact analysis for hypoid bevel gears. Comput Meth Appl Mech Eng2002; 191: 3965–3982.
17.
VimercatiM. Mathematical model for tooth surfaces representation of face-hobbed hypoid gears and its application to contact analysis and stress calculation. Mech Mach Theory2007; 42: 668–690.
18.
SimonV. Load distribution in hypoid gears. ASME J Mech Des2000; 122: 529–535.
19.
VecchiatoD. Tooth contact analysis of a misaligned isostatic planetary gear train. Mech Mach Theory2006; 41: 617–631.
20.
SimonV. Influence of tooth errors and shaft misalignments on loaded tooth contact in cylindrical worm gears. Mech Mach Theory2006; 41: 707–724.
21.
SimonV. Computer simulation of tooth contact analysis of mismatched spiral bevel gears. Mech Mach Theory2007; 42: 365–381.
22.
SimonV. Influence of tooth errors and misalignments on tooth contact in spiral bevel gears. Mech Mach Theory2008; 43: 1253–1267.
23.
LiS. Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications. Mech Mach Theory2007; 42: 88–114.
24.
LiS. Effects of machining errors, assembly errors and tooth modifications on loading capacity, load-sharing ratio and transmission error of a pair of spur gears. Mech Mach Theory2007; 42: 698–726.
25.
LiS. Contact problem and numeric method of planetary drive with small teeth number difference. Mech Mach Theory2008; 43: 1065–1086.
26.
WinkCHSerpaAL. Investigation of tooth contact deviations from the plane of action and their effects on gear transmission error. Proc IMechE. Part C: J Mechanical Engineering Science2005; 219: 501–509.
27.
KimWYooHHChungJ. Dynamic analysis for a pair of spur gears with translational motion due to bearing deformation. Journal of Sound and Vibration2010; 329: 4409–4421.
28.
Gonzalez-PerezIIserteJLFuentesA. Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact. Mech Mach Theory2011; 46: 765–783.
29.
LundvallOStrombergNKlarbringA. A flexible multi-body approach for frictional contact in spur gears. J Sound Vib2004; 278: 479–499.
30.
AjmiMVelexP. A model for simulating the quasi-static and dynamic behavior of solid wide-faced spur and helical gears. Mech Mach Theory2005; 40: 173–190.
31.
BettaiebMNVelexPAjmiM. A static and dynamic model of geared transmissions by combining substructures and elastic foundations-applications to thin-rimmed gears. ASME J Mech Des2007; 129: 184–194.
32.
KahramanASinghR. Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system. J Sound Vib1991; 146: 135–156.
33.
KuburMKahramanAZiniDM. Dynamic analysis of a multi-shaft helical gear transmission by finite elements: model and experiment. ASME J Vib Acoust2004; 126: 399–406.
34.
Al-shyyabAKahramanA. Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: sub-harmonic motions. J Sound Vib2005; 279: 417–451.
35.
Al-shyyabAKahramanA. Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: period-one motion. J Sound Vib2005; 284: 151–172.
36.
VinayakHSinghR. Multi-body dynamics and modal analysis of compliant gear bodies. J Sound Vib1998; 210: 171–214.
37.
VijayakarS. A combined surface integral and finite element solution for a three-dimension contact problem. Int J Numer Meth Eng1991; 31: 525–545.
38.
ParkerRGVijayakarSMImajoT. Non-linear dynamic response of a spur gear pair: modeling and experimental comparisons. J Sound Vib2000; 237: 435–455.
39.
ParkerRGAgasheVVijayakarSM. Dynamic response of a planetary gear system using a finite element/contact mechanics model. J Mech Des2000; 122: 304–310.
40.
ChoiSTMauSY. Dynamic analysis of geared rotor-bearing systems by the transfer matrix method. ASME J Mech Des2001; 123: 562–568.
41.
AnderssonAVedmarL. A dynamic model to determine vibrations in involute helical gears. J Sound Vib2003; 260: 195–212.
42.
TheodossiadesSNatsiavasS. Non-linear dynamics of gear pair systems with periodic stiffness and backlash. J Sound Vib2000; 229: 287–310.
43.
LitakGFriswellMI. Vibration in gear systems. Chaos Soliton Fractal2003; 16: 795–800.
44.
LitakGFriswellMI. Dynamics of a gear system with faults in meshing stiffness. Nonlin Dyn2005; 41: 415–421.
45.
SpitasCSpitasV. Calculation of overloads induced by indexing errors in spur gearboxes using multi-degree-of-freedom dynamical simulation. Proc IMechE. Part K: J Multi-body Dynamics2006; 220: 273–282.
46.
WangS. Shen Y and Dong H, Chaos and bifurcation analysis of a spur gear pair with combined friction and clearance. Chin J Mech Eng2002; 38: 8–11.
47.
WangJQinDLimTC. Influence of combined assembly error and bearing elasticity on spur gear tooth contact load distribution. Proc IMechE. Part C: J Mechanical Engineering Science2011; 225: 1507–1521.
48.
BatheKJ. Finite element procedures in engineering analysis, Englewood Cliffs: Prentice Hall, 1982.
49.
LitvinFLFuentesA. Gear geometry and applied theory, 2nd edn. Cambridge: Cambridge University Press, 2004.
50.
JohnsonKL. Contact Mechanics, Cambridge University Press, 1985.
51.
de MulJMKalkerJJFredrikssonB. The contact between arbitrarily curved bodies of finite dimensions. J Tribol Trans ASME1986; 108: 140–147.
52.
JalonJGBayoE. Kinematic and dynamic simulation of multi-body systems, New York: Springer Verlag, 1994.
