A combined FEM/BEM model and experimental investigation into the effects of fluid-borne noise sources on the air-borne noise generated by hydraulic pumps and motors

Abstract

A common assumption about fluid power systems is that the outlet pressure ripple is a primary source for air-borne noise. Fluid pressure fluctuations are caused by flow ripples generated by positive displacement units that are the prime power movers in these systems. The present research aims to leverage previous efforts in the topic of noise generation in hydrostatic units, formulating a method to predict air-borne noise for a particular reference machine. A numerical model has been developed to gain knowledge on the mechanisms of noise generation in external gear machines. The simulated noise sources are then applied to the structure in order to predict the propagation of noise to the surroundings. Also, experimental activity based on an innovative method of interpretation of noise measurements is also accomplished in order to better characterize the dependency between fluid-borne noise and air-borne noise. Measurements are made of total sound power level as well as sound pressure level at representative points to better understand the acoustic performance of external gear machines at a wide variety of operating conditions.

Keywords

Fluid power air-borne noise fluid-borne noise structure-borne noise external gear machines

Get full access to this article

View all access options for this article.

References

Fiebig

. Location of noise sources in fluid power machines. Int J Occup Saf Ergon 2007; 13(4): 441–450.

Cho YT and Bolton JS. Acoustical visualization of a refrigeration compressor by using statistically optimized near-field acoustical holography in cylindrical coordinates. In: The 2004 National Conference on Noise Control Engineering, Baltimore, Maryland, 12–14 July 2004.

Harari

. A survey of finite element methods for time-harmonic acoustics. Comput Methods Appl Mech Eng 2006; 195(13–16): 1594–1607.

Casoli P, Vacca A and Berta GL. Optimization of relevant design parameters of external gear pumps. In: The 7th JFPS international symposium on fluid power, Toyama, Japan, 15–18 September 2008.

Vassena A and Vacca A. Design optimization of the sliding elements of external gear machines. In: 6th FPNI – PhD symposium, West Lafayette, IN, USA, 15–19 June 2010.

Devendran R and Vacca A. Optimal design of gears and lateral bushes of external gear machines. In: FPMC 2012 Bath/ASME symposium on fluid power and motion control, Bath, UK, 12–14 September 2012.

Seeniraj

Ivantysynova

. Multi-objective optimization tool for noise reduction in axial piston machines. SAE Int J Commer Veh 2008; 1(1): 544–552.

Seeniraj

Ivantysynova

. A multi-parameter multi-objective approach to reduce pump noise generation. Int J Fluid Power 2011; 12(1): 7–17.

Ericson L, Johansson A and Palmberg J-O. Noise reduction by means of non-uniform placement of pistons in fluid power machines. In: Proceedings of the 2009 ASME dynamic systems and control conference and bath/ASME symposium on fluid power & motion control theme: system engineering, Hollywood, CA, USA, 12–14 October 2009.

10.

Hartmann K, Harms HH and Lang T. A model based approach to optimize the noise harmonics of internal gear pumps by reducing the pressure pulsation. In: 8th international fluid power conference (IFK), Dresden, Germany, 26–28 March 2012.

11.

Casoli

Vacca

Franzoni

. Modeling of fluid properties in hydraulic positive displacement machines. Simul Model Pract Theory 2006; 14: 1059–1072.

12.

Wang

Sakura

Kasarekar

. Numerical modeling and analysis of external gear pumps by applying generalized control volumes. Math Comput Modell Dyn Syst 2011; 17(5): 501–513.

13.

Negrini S. A gear pump designed for noise abatement and flow ripple reduction. In: International fluid power exposition and technical conference, Chicago, Illinois, 23–25 April 1996.

14.

Lätzel M and Schwuchow D. An innovative external gear pump for low noise applications. In: 8th International fluid power conference (IFK), Dresden, Germany, 26–28 March 2012.

15.

Klop R and Ivantysynova M. Sound intensity measurements to investigate noise generation of hydrostatic transmissions. In: Proceedings of the 7th international fluid power conference, Aachen, Germany, 2010 (7IFK), vol. 2, pp.229–242.

16.

Fiebig W and Helle K. The new way of noise reduction in external gear pumps. In: 7th international fluid power conference, Aachen, Germany, 2010.

17.

Yamazaki

Kojima

. Prediction of sound power radiated from oil hydraulic pump using FEM and BEM. Acoust Sci Technol 2003; 24(2): 103–105.

18.

Ortwig

. Experimental and analytical vibration analysis in fluid power systems. Int J Solids Struct 2005; 42: 5821–5830.

19.

Earnhart NE, Marek KA and Cunefare KA. Novel, compact devices for reducing fluid-borne noise. In: SAE 2011 noise and vibration conference and exhibition, Grand Rapids, MI, USA, 2011.

20.

Vacca

Guidetti

. Modelling and experimental validation of external spur gear machines for fluid power applications. Simul Model Pract Theory Elsevier 2011; 19: 2007–2031.

21.

Vacca A, Dhar S and Opperwall T. A coupled lumped parameter and CFD approach for modeling external gear machines. In: The twelfth Scandinavian international conference on fluid power, Tampere, Finland, 2011.

22.

Dhar

Vacca

. A novel CFD-axial motion coupled model for the axial balance of lateral bushings in external gear machines. Simul Model Pract Theory Elsevier 2012; 26: 60–76.

23.

Ivantysyn

Ivantysynova

. Hydrostatic pumps and motor, principles, designs, performance, modeling, analysis, control and testing, New Delhi: Academic Books International, 2001.

24.

Sandberg G and Ohayon R. Computational aspects of structural acoustics and vibration. New York: Springer, 2009.

25.

Desmet W, Sas P and Vandepitte D. Numerical acoustics theoretical manual. Leuven, Belgium: LMS International, 2012.

26.

Bonanno A and Pedrielli F. A study of the structure borne noise of hydraulic gear pumps. In: 7th JFPS international symposium on fluid power, Toyama, Japan, Toyama, Japan, 2008, pp.641–646.