A new six-parallel-legged walking robot for drilling holes on the fuselage

Abstract

In this paper, a new kind of six-parallel-legged robot is presented. It is designed for drilling holes on the aircraft surface. Each leg of the robot is a 3-DOF parallel mechanism with three chains: 1UP and 2UPS. The three prismatic joints are active joints and can be controlled either by position or by force. First, the task process and the gait plan are discussed and then, according to the requirement, the control method is introduced. After that, the mechanism topology patterns under different working conditions are studied and the control mode of each motor is determined. Then the kinematical model is built up, based on which the position control curves can be obtained. The simulation result shows that the robot can walk pretty well on the fuselage surface and that the actuation forces are quite smooth. Furthermore, the first prototype has been manufactured and some experiments such as walking and manipulation have been done.

Keywords

Parallel mechanism legged robot topology pattern hybrid control

Get full access to this article

View all access options for this article.

References

Sarh

Buttrick

Munk

Bossi

Aircraft manufacturing and assembly. In: Nof

(ed.) Springer handbook of automation, Springer Publishing Company, Incorporated, 2009, pp. 893–910.

Atkinson

Hartmann

Jones

Gleeson

. Robotic drilling system for 737 aileron. In: SAE 2007 AeroTech Congress & Exhibition, Los Angeles, CA, USA, September, 2007. SAE Technical Papers 2007-01-3821.

Devlieg

Szallay

. Applied accurate robotic drilling for aircraft fuselage. SAE Internat J Aerospace 2010; 3: 180–186.

Liang

. Robotic drilling system for titanium structures. Internat J Adv Manuf Technol 2011; 54: 767–774.

Ariffin

MKAM

Ali

MIM

Sapuan

Ismail

. An optimise drilling process for an aircraft composite structure using design of experiments. Sci Res Essays 2009; 4: 1109–1116.

Zhang

Wang

. Four-point regulation algorithm for an end-effector of a flexible drilling robot. Appl Mech Mater 2012; 141: 298–302.

Merlet

. Parallel robots, New York: Springer, 2006.

Murphy

Saunders

Moreira

. The littledog robot. Int J Robotics Res 2011; 30: 145–149.

Saranli

Buehler

Koditschek

. Rhex: a simple and highly mobile hexapod robot. Int J Robotics Res 2001; 20: 616–631.

10.

Wang

. Application of parallel leg mechanisms in quadruped/biped reconfigurable walking robot[J]. Chin J Mech Eng 2009; 45: 24–30.

11.

Figliolini

Rea

Mechanics and simulation of six-legged walking robots. In: Zhang

(ed.) Climbing and walking robots towards new applications, Austria: I-Tech Education and Publishing, 2007, pp. 1–22.

12.

Figliolini

Rea

Conte

Mechanical design of a novel biped climbing and walking robot. In: Parenti-Castelli

Schiehlen

(eds). ROMANSY 18 Robot design, dynamics and control, New York: Springer, 2010, pp. 199–206.

13.

Bellakehal

Andreff

Mezouar

Tadjine

. Force/position control of parallel robots using exteroceptive pose measurements. Meccanica 2011; 46: 195–205.

14.

Wang

Meng

. Experimental research on force/position control of a wire-driven parallel rehabilitative robot. Appl Mech Mater 2012; 138: 68–73.

15.

Wang

. Dynamics and control of a planar 3-DOF parallel manipulator with actuation redundancy. Mech Machine Theory 2009; 44: 835–849.

16.

Zhang

Lei

. Kinematic analysis of a novel 3-DOF actuation redundant parallel manipulator using artificial intelligence approach. Robotics Comput – Integr Manuf 2011; 27: 157–163.

17.

Tang

Yao

Cheng

Zhao

. Hybrid force/position control investigation of parallel machine tool with redundant actuation. Appl Mech Materials 2012; 121: 2040–2044.