In the course of expansion in turbines, steam first supercools and then nucleates to become a two-phase mixture. The fluid then consists of a very large number of extremely small droplets which are carried by and interact with the parent vapour. The formation and subsequent behaviour of the liquid phase cause problems which lower the performance of the wet stages of steam turbines. To treat such flows the general conservation equations governing the whole field are combined with those describing droplet nucleation and growth and the set treated numerically. The article examines the solution of throughflows of nucleating steam in a turbine stage using a time-marching technique. The treatment which is the refinement of an earlier one has been applied to the flow in a turbine stage. Comparisons are presented between the results of theoretical solutions and direct measurements upstream and downstream of the nucleating stage and the agreement obtained is good.
BakhtarFBamkoleBO. An examination of the throughflow of nucleating steam in a turbine stage by a time-marching method. Proc IMechE, Part A: J Power and Energy1989; 203(A4): 233–243.
2.
OswatitschK. Kondensationsercheinungen in Überschalldüsen. Z Agnew Math Mechanics1942; 22: 1–14.
3.
Gyarmathy G. Grundlagen einer Theorie der Nassdampfturbine. 1962, Dissertation, Inst. for Thermal Turbo-Machines, Federal technical University, Zurich. English translation CEGB (London), Report no. T 781, 1963.
4.
Gyarmathy G and Meyer H. Spontaneous condensation phenomena – Parts 1 and 2. 1965, VDI Forschungsheft, vol 508, (VDI-Verlag, Dusseldorf). English Translation CEGB Translation No 4160.
5.
Wu CH. A general theory of three dimensional flow in subsonic and supersonic turbomachines of axial, radial and mixed flow types. NACA, TN 2604, 1952.
6.
BakhtarFYoungJB. A study of choking conditions in the flow of wet steam. Proc Instn Mech Eng1978; 192(21): 237–242.
7.
BakhtarFMohammadi TochaiMT. An investigation of two-dimensional flows of nucleating and wet steam by the time-marching method. Int J Heat Fluid Flow1980; 2(1): 5–18.
8.
MashmoushyHMahpeykarMRBakhtarF. Studies of nucleating and wet steam flows in two-dimensional cascades. Proc IMechE, Part C: J Mechanical Engineering Science2004; 218(C8): 843–858.
9.
BakhtarFWhiteAJMashmoushyH. Theoretical treatments of two-dimensional two-phase flows of steam and comparison with cascade measurements. Proc IMechE, Part C: J Mechanical Engineering Science2005; 219(C12): 1335–1355.
10.
BakhtarFMamatZAJadayelOC. On the performance of a cascade of improved turbine nozzle blades in nucleating steam. Part 1: surface pressure distributions. Proc IMechE, Part C: J Mechanical Engineering Science2009; 223(C8): 1903–1914.
11.
BakhtarFMamatZAJadayelOC. On the performance of a cascade of improved nozzle blades in nucleating steam. Part 2: wake traverses. Proc IMechE, Part C: J Mechanical Engineering Science2009; 223(C8): 1915–1929.
12.
BakhtarFZamriMY. On the performance of a cascade of improved nozzle blades in nucleating steam. Part 3: theoretical analysis. Proc IMechE, Part C: J Mechanical Engineering Science2011; 225(C7): 1649–1671.
13.
Singh G, Hunt R and McCallum M. Wet steam analysis using Eulerian method for two-dimensional droplet growth and nucleation rate equations. In: Proceedings of the institution of mechanical engineers third European conference on turbo-machinery, London, UK, March 1999, paper no. C557/099/99, pp.783–801.
14.
Singh U. Method for nucleating steam flow in low-pressure turbine stages. In: Proceedings of the institution of mechanical engineers third European conference on turbo-machinery. London, UK, March 1999, paper no. C557/010/99, pp.827–836.
15.
Liberson AS, Hesler SH, McCloskey TH. A unified CFD approach to a variety of condensation processes in low pressure steam turbines. In: Proceedings of EPRI/VGB conference – steam chemistry: interaction of chemical species with water, steam and materials during evaporation, superheating and condensation, Freiburg, Germany, June 1999, EPRI, TR-114837.
16.
GerberAG. Two-phase Eulerian/Lagrangian model for nucleating steam flow. J Fluids Eng2000; 124: 465–475.
17.
SenooSShikanoY. Two-dimensional analysis for non-equilibrium homogeneously condensing flows through steam turbine cascade. Japan Soc Mech Eng Int J Ser B2002; 45(4): 865–871.
18.
Zhang D, Liu J, Sturmayr A, et al. A practical numerical simulation approach for 3D wet steam flow. In: Proceedings of international joint power generation conference, Atlanta, GA, 16–19 June 2003, pp.389–395. New York, NY: ASME.
19.
GerberAGKermaniMJ. A pressure based Eulerian-Eulerian multi-phase model for non-equilibrium condensation in transonic steam flow. Int J Heat Mass Transfer2004; 47: 2217–2231.
20.
YamamotoS. Computation of practical flow problems with release of latent heat. Energy2005; 30: 197–208.
21.
Ikeda T and Suzuki A. Some findings on the flow behaviour of last-stage turbine buckets by linear cascade tests in steam. In: Proceedings of the institution of mechanical engineers conference on heat and fluid flow in steam and gas turbine plant, Warwick University, UK, 1973, C26/73, pp.45–55.
22.
Cox HJA, Forster VT and Hobson G. Aerodynamic development of steam turbine blading. In: Institution of mechanical engineers conference steam turbines for the 1980’s, London, UK, October 1979, 1979-12, paper no. C230/79, pp.293–304.
23.
Hosenfeld HG. The steam test rig at KWU and its cascade steam tunnel. In: Symposium on measuring techniques in transonic and supersonic flows, Oxford, UK, March 1988.
24.
SejnaMLainJ. Numerical modelling of wet steam flow with homogeneous condensation on unstructured triangular meshes. Z Angew Math Mech1994; 74(5): T375–T378.
25.
Pitto P, Trucco Martinenzo A and Nurzia F. Non-equilibrium two-dimensional analysis of wet steam flow in turbine blade cascades and steam tunnel experimentation. In: International symposium on two-phase flow modelling and experimentation, Rome, Italy, 9–11, October 1995.
26.
DobesJFortJHalmaJ. Numerical solution of single and multi-phase internal transonic flow problems. Int J Numer Methods Fluids2005; 48: 91–97.
27.
WhiteAJYoungJBWaltersPT. Experimental validation of condensing flow theory for a stationary cascade of steam turbine blades. Proc Royal Soc A1996; 354: 59–80.
28.
Moore MJ, Walters PT, Crane RI, et al. Predicting the fog drop size in wet steam turbines, In: Institution of mechanical engineers, University of Warwick, Coventry, UK, 1973, Publication 3, paper no. C37/73, 101–109.
29.
SnoeckJTwo dimensional condensing flow in transonic turbine cascades. In: MooreMJSieverdingCH (eds). Aerothermodynamics of low pressure steam turbines and condensers. New York, NY: Hemisphere Publishing Corporation, 1987, pp. 113–133.
30.
BakhtarF. Special issue on wet steam. Proc IMechE, Part C: J Mechanical Engineering Science2004; 218(C8):
31.
BakhtarF. Special issue on wet steam. Part 2. Proc IMechE, Part C: J Mechanical Engineering Science2005; 219(C12):
32.
GerberAGSiggRVölkerL. Predictions of non-equilibrium phase transition in a model low pressure steam turbine. Proc IMechE, Part A: J. Power and Energy2007; 221(A6): 825–835.
33.
Gardzilewicz A, Kolovratnik M, Wróbleswski W, et al. Experimental and theoretical investigation of steam condensation in LP part of a large power turbine. In: ETC7-509, European Turbo-machinery Conference ETC-7, Athens, Greece, 2007, paper no. 059, pp.1–11.
34.
Torre A and Cecchi S. Latest developments & perspectives in the optimised design of low pressure steam turbines at Ansaldo Energia. In: Invited lecture, ETC7-503, European turbo-machinery conference ETC-7, Athens, Greece, 2007, paper no. ETC 7-503, pp.1–22.
35.
SturmayrAHirschCH. Throughflow model for design and analysis integrated in a three-dimensional Navier-Stokes solver. Proc IMechE, Part A: J Power and Energy1999; 213(A4): 263–273.
36.
DentonJDDawesWN. Computational fluid dynamics for Turbomachinery design. Proc IMechE, Part C: J Mechanical Engineering Science1999; 213(C2): 107–124.
37.
DentonJD. Throughflow calculations for transonic axial flow turbines. Trans ASME J Eng Power1978; 100: 212–218.
38.
YeohCCYoungJB. Non-equilibrium streamline curvature throughflow calculations in wet steam turbines. Trans ASME J Eng Power1982; 104: 489–496.
39.
YeohCCYoungJB. Non-equilibrium throughflow analyses of low pressure wet steam turbines. Trans ASME J Eng Power1984; 106: 716–724.
40.
SpurrA. The prediction of 3D transonic flows in turbomachinery using a combined throughflow and blade-to-blade time-marching method. Int J Heat Fluid Flow1980; 2(4): 189–199.
41.
BakhtarFMahpeykarMR. On the performance of a cascade of turbine rotor tip section blading in nucleating steam Part 3: theoretical treatment. Proc IMechE, Part C: J Mechanical Engineering Science1997; 211(C3): 195–210.
42.
BakhtarFZamriMYRodriguez-LelisJM. A comparative study of treatment of two-dimensional two-phase flows of steam by a Runge-Kutta and by Denton’s methods. Proc IMechE, Part C: J Mechanical Engineering Science2007; 221(C6): 689–706.
43.
KleitzADoreyJM. Instrumentation for wet steam. Proc IMechE, Part C: J Mechanical Engineering Science2004; 218(C8): 811–842.
44.
MooreMJInstrumentation for wet steam. In: MooreMJSieverdingCH (eds). Two-phase steam flow in turbines and separators, New York, NY: Hemisphere Publishing, 1976.
45.
Cox HJA. Experimental development of blading for large steam turbines, von Karman Institute for Fluid Dynamics, Lecture Series 180-6, Steam turbines for large power outputs, Rhode Saint Genese, Belgium, April 1980.
46.
Denton JD. An improved time-marching method for turbomachinery flow calculations. In: Trans ASME : J Eng for Gas Turbines and Power 1983; 105(3): 514–521.
