Study on extraction of electrical runout in eddy current measurement using finite element method

Abstract

Electrical runout is a bottleneck problem of eddy current sensor, which is caused by the maldistribution/variation of material electromagnetic properties of measurement target. However, extraction methods of electrical runout in eddy current displacement measurement remain ambiguous. Here, a 2D finite element model for the influence analysis of conductivity and permeability of ferromagnetic material on coil impedance of eddy current sensor is reported, which will be beneficial for detecting material properties and guiding manufacturing process. The relationships between the real and imaginary part of coil impedance with the varied material conductivity, relative permeability and the lift-off, which indicates the detecting distance, are investigated. When the conductivity, relative permeability of ferromagnetic material and the lift-off vary within a certain range, the relationships between the real and imaginary part of coil impedance are all nearly linear. This paper further shows that the character of distribution of resistance and reactance in diagram under different material properties and same measuring distance is linear. Furthermore, these lines under different measuring distances are parallel. Also the character under different measuring distances and same material property is linear, but these lines under different material properties are diffuse with same intercept. Altogether, the study shows that this method based on redesign of signal processing and its circuit is feasible and instructive in separating electrical runout from the output of eddy current sensor.

Keywords

Electrical runout eddy current sensor finite element method ferromagnetic material coil impedance

Get full access to this article

View all access options for this article.

References

Littrell

. Understanding and mitigating shaft runout. Orbit Mag 2005; 25: 5–17.

DeBlock MJ, Wood BM and McDonnell JW. Predicting shaft proximity probe track runout on API motors and generators. In: Petroleum and chemical industry technical conference, Calgary, Alta, 17--19 September 2007, pp.1–8.

Biggs DH. Method for removing electrical runout in machine shafts and apparatus for use with the same. United States patent No.3986380, 1975.

Kikaganeshwala Y. Method for measuring slow roll characteristics of partially machined shaft of an electrodynamic machine. United States patent No. 20110309828, 2011.

Tian

Zhao

Baines

. The research of inhomogeneity in eddy current sensors. Sens Actuators A 1998; 69: 148–151.

Petrovic

Jakovljevic

. Dynamic compensation of electrical run-out in eddy current contactless measurements of non-stationary ferromagnetic target. Sens Lett 2009; 7: 191–202.

Yating

Tuo

Pingan

. A new eddy current displacement measuring instrument independent of sample electromagnetic properties. NDT&E Int 2012; 48: 16–22.

Yu YT and Du PA. Research on the correlation between measured material properties and output of eddy current sensor. In: Proceedings of IEEE international conference on industrial technology, Hong Kong, 14--17 December 2005, pp.428–431.

Gao

Cao

. Research of spindle runout testing methods. Appl Mech Mater 2012; 121–126: 1455–1459.

10.

Dodd

Deeds

Luquire

. Integral solutions to some eddy current problems. Int J Nondestructive Test 1970; 1: 29–90.

11.

Theodoulidis

Kriezis

. Series expansions in eddy current nondestructive evaluation models. J Mater Process Technol 2005; 161: 343–347.

12.

Yating

Pingan

Lichuan

. Coil impedance calculation of an eddy current sensor by the finite element method. Russ J Nondestructive Test 2008; 44: 296–302.

13.

Rachek

Feliachi

. 3-D movement simulation techniques using FE methods: application to eddy current non-destructive testing. NDT&E Int 2007; 40: 35–42.

14.

KimT-O LeeG-S Kim

H-Y

. Modeling of eddy current sensor using geometric and electromagnetic data. J Mech Sci Technol 2007; 21: 465–475.

15.

Neugebauer R, Drossel W-G, Mainda P, et al. Sensitivity analysis of eddy current sensors using computational simulation. In: Progress in electromagnetics research symposium proceedings, Suzhou, China, 12--16 September 2011, pp.441–445.

16.

Iswahjudi H and Gatzen HH. FEM simulation for design and evaluation of an eddy current microsensor. In: Proceedings 14th European simulation symposium, SCS Europe BVBA, 2002.

17.

Konrad A. Eddy current and modeling. IEEE Transactions on Magnetics 1985; 21: 1805–1810.