Pressure effects on the performance of external gear pumps under cavitation

Abstract

The numerical analysis of an external gear pump with cavitation effects has been validated with experimental data obtained by applying Time-Resolved Particle Image Velocimetry. The effect of inlet and outlet pressure on volumetric efficiency has been studied numerically. First, the Particle Image Velocimetry method was used to analyze the two-dimensional velocity field in the middle plane of the suction chamber of the gear pump. The main improvement, with respect to previous similar analysis is the use of alginate micro particles as tracers. It is seen that the two-dimensional model is able to characterize the flow field of the real pump in the region of the inlet chamber in which cavitation is expected. In a previous study, it was seen that a cavitation cloud acted as a virtual contact point at low pressure, being responsible for an increase on the volumetric efficiency. The first set of simulations represents the pump working with high outlet pressure. Now, the cavitation cloud is not present and cavitation no longer helps to improve the efficiency of the pump. The second set of simulations represents the pump with an inlet loss factor, which implies a mean inlet pressure below atmospheric conditions. This allows cavitation clouds to propagate upstream. Despite the larger cavitation clouds, volumetric efficiency only drops at high operating velocities, when some clouds become trapped between gears and casing and are transported to the pressure side.

Keywords

Cavitation Particle Image Velocimetry computational fluid dynamics gear pumps volumetric efficiency

Get full access to this article

View all access options for this article.

References

Borghi M, Zardin B and Specchia E. External gear pump volumetric efficiency: numerical and experimental analysis. SAE ISSN 2009-01-2844, 2009.

Del Campo

Castilla

Raush

. Numerical analysis of external gear pumps including cavitation. J Fluid Eng – T ASME 2012; 134: 081105–081105.

Coutier-Delgosha

Fortes-Patella

Reboud

. Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation. J Fluid Eng – T ASME 2003; 125: 38–45.

Singhal

Athavale

. Mathematical basis and validation of the full cavitation model. J Fluid Eng – T ASME 2002; 124: 617–624.

Ding

Visser

Jiang

. Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications. J Fluid Eng – T ASME 2011; 133: 011101–011101.

Zhou

Wang

. Numerical simulation of cavitation around a hydrofoil and evaluation of a RNG k-ɛ model. J Fluid Eng - T ASME 2011; 133: 081301–081301.

Schnerr GH and Sauer J. Physical and numerical modeling of unsteady cavitation dynamics. In: Fourth international conference on multiphase flow, New Orleans, US, 2001.

Zwart PJ, Gerber AG and Belamri T. A two-phase flow model for predicting cavitation dynamics. In: ICMF international conference on multiphase flow, Yokohama, Japan, 2004.

Mejri

Bakir

Rey

. Comparison of computational results obtained from a homogeneous cavitation model with experimental investigations of three inducers. J Fluid Eng – T ASME 2006; 128: 1308–1323.

10.

Yamaguchi A. Cavitation characteristics of long orifices in hydraulic systems. In: 5th international fluid power symposium, Durham, UK, 1978.

11.

Strasser

. CFD Investigation of gear pump mixing using deforming/agglomerating mesh. J Fluid Eng – T ASME 2007; 129: 476–484.

12.

Houzeaux

Codina

. A finite element method for the solution of rotary pumps. Comput Fluids 2007; 36: 667–679.

13.

Castilla

Gamez-Montero

Ertuürk

. Numerical simulation of the turbulent flow in the suction chamber of a gear pump using deforming mesh and mesh replacement. Int J Mech Sci 2010; 52: 1334–1342.

14.

Castilla

Wojciechowski

Gamez-Montero

. Analysis of the turbulence in the suction chamber of an external gear pump using time resolved particle image velocimetry. J Flow Meas Instrum 2008; 19: 377–384.

15.

Ertürk

Vernet

Castilla

. Experimental analysis of the flow dynamics in the suction chamber of an external gear pump. Int J Mech Sci 2011; 53: 135–144.

16.

Erturk N. Particle image velocimetry applications in complex flow systems. PhD Thesis, Rovira i Virgili University, Spain, 2012.

17.

Van der Graaf G. GPIV: an open source project for PIV. In: Presentation at PIVNET/ERCOFTAC workshop, Lisbon, Portugal, 2004.

18.

Guiseppe M, Cadalfach J, van der Graaf G, et al. Air cavities with parallel slats inside. In: EuroSun2004, Freiburg, Germany, 2004.

19.

Scarano

. Iterative image deformation methods in PIV. Meas Sci Technol 2002; 13: R1–R1.

20.

Westerweel

Scarano

. Universal outlier detection for PIV data. Exp Fluids 2005; 39: 1096–1100.