This paper introduces a novel parallel mechanism having Schönflies motion. The mechanism consists of only two RRPaR-type limbs. After a short description of its structure, its position analysis is conducted and its screw-based kinematic model is derived. Next, its singularity analysis is performed via Grassmann line geometry and then its optimal kinematic characteristics are examined with respect to workspace size and isotropy property. The results show that the proposed parallel mechanism has a very high potential to be used as a manipulator or a haptic device. A prototype of this mechanism was developed and tested to corroborate its performance.
Clavel R. Delta, a fast robot with parallel geometry. In: 18th international symposium on industrial robots, Lausanne: IFS Publications, April 1988, pp.91–100.
2.
Choi HB, Company O, Pierrot F, et al. Design and control of a novel 4-DOF parallel robot H4. In: Proceedings of IEEE international conference on robotics and automation, Taipei, 14–19 September 2003, pp.1185–1190.
3.
Krut S, Company O, Benoit M, et al. I4: New parallel mechanism for scara motions. In: Proceedings of IEEE international conference on robotics and automation, Taipei, 14--19 September 2003, pp.1875–1880.
4.
CompanyOMarquetFPierrotF. A new high-speed 4-DOF parallel robot synthesis and modelling issues. IEEE Trans Robot Autom2003; 19: 411–420.
5.
Krut S, Nabat V, Company O, et al. A high-speed parallel robot for scara motions. In: Proceedings of IEEE international conference on robotics and automation, New Orleans, 26 April--1 May 2004, pp.4109–4115.
6.
KrutSPierrotF. Internal singularity analysis of a class of lower mobility parallel manipulators with articulated traveling plate. Robotics, IEEE Transactions on2006; 22: 1–11.
7.
PierrotFNabatVCompanyO. Optimal design of a 4-DOF parallel manipulator: From academia to industry. Robotics, IEEE Transactions on2009; 25: 213–224.
8.
Cammarata A, Angeles J and Sinatra R. Kinetostatic and inertial conditioning of the McGill Schönflies-motion generator. In: Advances in Mechanical Engineering 2010; 2010: Article ID 186203.
9.
HuangZLiQC. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint synthesis methods. Int J Robot Res2003; 22: 59–79.
10.
RichardPLGosselinCMKongX. Kinematic analysis and prototyping of a partially decoupled 4-DOF 3T1R parallel manipulator. ASME J Mech Des2007; 129: 611–616.
11.
SalgadoOAltuzarraOPetuyaV. Synthesis and design of a novel 3T1R fully-parallel manipulator. ASME J Mech Des2008; 130: 042305–042305.
12.
GoguG. Structural synthesis of fully-isotropic parallel robots with Schönflies motions via theory of linear transformations and evolutionary morphology. Eur J Mech A/Solid2007; 26: 242–269.
13.
Kim SM, Kim WK and Yi B-J. Kinematic analysis and optimal design of a 3T1R type parallel mechanism. In: Proceedings of IEEE international conference on robotics and automation, Kobe, Japan, 12–17 May 2009, pp.2199–2204.
14.
KimSMYiB-JKimWK. Forward kinematic singularity avoiding design of a Schönflies motion generator by asymmetric attachment of subchains. Int J Control Autom Syst2013; 11: 116–127.
15.
YiB-JKimSMKwakHK. Multi-task oriented design of an asymmetric 3T1R type 4-DOF parallel mechanism. Proc IMechE, Part C: J Mechanical Engineering Science. 2013; 227(10): 2236–2255.
16.
Arata J, Kondo H, Sakaguchi M, et al. A haptic device DELTA-4: Kinematics and its analysis. In: Third joint Eurohaptics conference and symposium on haptic interfaces for virtual environment and teleoperator systems, Salt Lake City, 18--20 March 2009, pp.452–457.
17.
ArataJKondoHIkedoN. Haptic device using a newly developed redundant parallel mechanism. IEEE Trans Robot2011; 27: 201–214.
18.
DaiJSHuangZLipkinH. Mobility of over-constrained parallel mechanisms. Trans ASME J Mech Des2006; 128: 220–229.
19.
TsaiL-W. Robot analysis: The mechanics of serial and parallel manipulatorsNew York: Wiley InterscienceJohn Wiley & Sons, Inc., 1999.
Zlatanov D, Bonev IA and Gosselin CM. Constraint singularities of parallel mechanisms. In: Proceedings of IEEE international conference on robotics and automation, Washington D.C., 11--15 May 2002, pp.496–502.
22.
MerletJP. Singular configurations of parallel manipulators and Grassmann geometry. Int J Robot Res1989; 8: 45–56.
23.
HaoFMcCarthyJM. Conditions for line-based singularities in spatial platform manipulators. J Robot Syst1998; 15: 43–55.
24.
LeeJHYiB-JOhS-R. Optimal design and development of a five-bar finger with redundant actuation. Mechatronics2000; 11: 27–42.
