Analysis of continuously variable transmission for flywheel energy storage systems in vehicular application

Abstract

Energy storage devices are an essential part of hybrid and electric vehicles. The most commonly used ones are batteries, ultra capacitors and high speed flywheels. Among these, the flywheel is the only device that keeps the energy stored in the same form as the moving vehicle, i.e. mechanical energy. In order to connect the flywheel with the vehicle drive line, a suitable means is needed which would allow the flywheel to vary its speed continuously, in other words a continuously variable transmission (CVT) is needed. To improve the efficiency and speed ratio range of the variators, a power spilt CVT (PSCVT) can be employed. This paper discusses the kinematics of PSCVT used to connect the flywheel to the driveline. A methodology describing the characteristic equations of speed ratio, power flow and efficiency of the PSCVT for various types including power recirculating and multi regime in both directions of power flow has been presented. An example of a PSCVT for a flywheel energy storage system (FESS) is computed using the derived equations and the results compared.

Keywords

Flywheel planetary gear set continuously variable transmission kinematics efficiency

Get full access to this article

View all access options for this article.

References

Dhand

Pullen

. Review of flywheel based internal combustion engine hybrid vehicles. Int J Automotive Technol 2013; 14: 797–804.

Fuchs

Tamura

Mccullough

. The making of the full toroidal variator. JTEKT Eng J English Ed 2009, pp. 1006E–1006E.

Srivastava

Haque

. A review on belt and chain continuously variable transmissions (CVT): Dynamics and control. Mech Machine Theory 2009; 44: 19–41.

Kluger

Long

. An overview of current automatic, manual and continuously variable transmission efficiencies and their projected future improvements. SAE Technical Paper 1999-01-1259; 1999.

White

. Properties of differential transmissions. Engineer 1967; 224: 105–111.

Pennestri

Freudenstein

. The mechanical efficiency of epicyclic gear trains. J Mech Des 1993; 115: 645–651.

Planetary gear set [image on the internet], http://www.dacoglu.com/desotocd/11A_ThreeSpeed%20With%20Overdrive/Plymouth%20Bulletin%20-%20Overdrive%20Transmission.htm (2013, accessed 16 April 2013).

White

. Multiple-stage, split-power transmissions. J Mech 1970; 5(4): 505–520.

Beachley

. On the mechanical efficiency of differential gearing. J Mech Transm Automat Des 1985; 107: 61–67.

10.

Hsieh

Yan

. On the mechanical efficiency of continuously variable transmissions with planetary gear trains. Int J Vehicle Des 1990; 11: 176–187.

11.

Yan

Hsieh

. Maximum mechanical efficiency of infinitely variable transmissions. Mech Mach Theory 1994; 29: 777–784.

12.

Mangialardi

Mantriota

. Comments on: maximum mechanical efficiency infinitely variable transmissions. Mech Mach Theory 1998; 33: 443–447.

13.

Mangialardi

Mantriota

. Power flows and efficiency in infinitely variable transmissions. Mech Mach Theory 1999; 34: 973–994.

14.

Mantriota

. Power split continuously variable transmission systems with high efficiency. Proc IMechE, Part D: J Automobile Engineering 2001; 215: 357–368.

15.

Mantriota

. Theoretical and experimental study of a power split continuously variable transmission system part 1. Proc IMechE, Part D: J Automobile Engineering 2001; 215: 837–850.

16.

Mantriota

. Theoretical and experimental study of a power split continuously variable transmission system part 2. Proc IMechE, Part D: J Automobile Engineering 2001; 215: 851–864.

17.

Mantriota

. Performances of a series infinitely variable transmission with type I power flow. Mech Mach Theory 2002; 37: 579–597.

18.

Mantriota

. Performances of a parallel infinitely variable transmissions with a type II power flow. Mech Mach Theory 2002; 37: 555–578.

19.

Fussner

Singh

. Development of single stage input coupled split power transmission arrangements and their characteristics. SAE Technical Paper 2002-01-1294; 2002.

20.

Beachley

Anscomb

Burrows

. Evaluation of split path extended range continuously variable transmissions for automotive applications. J Franklin Institute 1984; 317: 235–262.

21.

Martinez-Gonzalez P. A study on the integration of a high-speed flywheel as an energy storage device in hybrid vehicles. PhD Thesis, Imperial College London, 2010.

22.

Bottiglione

Mantriota

. Reversibility of power-split transmissions. J Mech Des 2011; 133: Article Id 084503–Article Id 084503.

23.

Read M. Flywheel energy storage systems for rail. PhD Thesis, Imperial College London, 2010.

24.

White

. A two-stage variable-speed transmission for extended speed ranges. Mach Tool Res 1965; 4: 115–120.

25.

Pennestri

Valentini

. A review of formulas for the mechanical efficiency analysis of two degrees-of-freedom epicyclic gear trains. J Mech Des 2003; 125: 602–608.

26.

Macmillan

. Power flow and loss in differential mechanisms. J Mech Eng Sci 1961; 3: 37–41.