Configuration estimation of elastic wire has been confined to small-sized continuum bodies. This work aims at configuration estimation algorithm of general elastic wires using minimum number of information (i.e. two magnetic sensor and length of wire) with consideration of gravity load of the elastic wire. The elastic wire is modelled as a kinematically redundant manipulator with multiple links and joints. An optimization algorithm minimizing the potential energy of the elastic wire is employed. The performance of the configuration estimation algorithm is proven by comparison of simulation and experiment results.
SicilianoB. Kinematic control of redundant robot manipulators: A tutorial. J Intell Robot Syst1990; 3: 201–212.
2.
Yoshikawa T. Manipulability and redundancy control of robotic mechanisms. In: Proceedings of IEEE international conference on robotics and automation, St. Louis, Missouri, 1985, pp.1004–1009.
3.
Robinson G. Continuum robots – a state of the art. In: Proceedings of IEEE international conference on robotics and automation, Roma, Italy, 1999, pp.2849–2854.
4.
Hannan MW and Walker ID. Novel kinematics for continuum robots. Adv in Robot Kinemat 2000; 227–238.
5.
Tatlicioglu E, Walker ID and Dawson DM. Dynamic modelling for planar extensible continuum robot manipulators. In: Proceedings of IEEE international conference on robotics and Automation, Detroit, Michigan, 2007, pp.1357–1362.
6.
Su H, Cardona DC, Shang W, et al. A MRI-guided concentric tube continuum robot with piezoelectric actuation: A feasibility study. In: Proceedings of IEEE international conference on robotics and automation, Rome, Italy, 2007, pp.1939–1945.
7.
Tatlicioglu E, Walker ID and Dawson DM. New dynamic models for planar extensible continuum robot manipulators. In: Proceedings of IEEE/RSJ international conference on intelligent robots and systems, San Diego, U.S.A., 2007, pp.1485–1490.
8.
Grissom MD, Diemmo D, Pritts M, et al. Design and experimental testing of the OctArm soft robot manipulator. In: Proceedings of SPIE 6230, Unmanned Systems Technology VIII, Orland FL, 200662301F, 2006.
9.
Yoon H-S, Jeon J, Chung JH, et al. A continuum module for developing a biopsy device. In: Proceedings of international conference on ubiquitous robots and ambient intelligence, Daejeon, Korea, 2012, pp.442–444.
10.
HaiyanHMantianLPengfeiW. Development of a continuum robot for colonoscopy. High Technology Lett2009; 15: 115–119.
11.
BretlTMcCarthyZ. Mechanics and quasi-static manipulation of planar elastic kinematic chains. IEEE Transactions on Robotics2013; 29: 1–14.
12.
Bell CS, Puerto GA, Mariottini G-L, et al. Six DOF motion estimation for teleoperated flexible endoscopes using optimal flow: A comparative study. In: Proceedings of IEEE international conferences on Robotics and Automation, Hong Kong, 2014, pp.5386–5392.
13.
Ryu SC and Dupont PE. FBG-based shape sensing tubes for continuum robots. In: Proceedings of IEEE international conference on robotics and automation, Hong Kong, 2014, pp.3531–3537.
14.
Kim B, Ha J, Park FC, et al. Optimizing curvature sensor placement for fast, accurate shape sensing of continuum robot. In: Proceedings of IEEE international conference on robotics and automation, Hong Kong, 2014, pp.5374–5379.
15.
Chen Y, Liang J and Hunter IW. Continuum robotic endoscope design and path planning. In: Proceedings of IEEE international conference on robotics and automation, Hong Kong, 2014, pp.5593–5540.
16.
ShahSPearsonHMossS. Magnetic endoscope imaging: A new technique for localizing colonic lesions. Endoscopy2002; 34: 900–904.
17.
Jeon J and Yi B-J. Shape prediction algorithm for flexible endoscope. In: Proceedings of IEEE international conference on robotics and automation, Hong Kong, 2014, pp.2856–2861.
18.
Craig JJ. Introduction to Robotics. 3rd ed. Prentice Hall.
19.
GrafflinCPAlunniNSuayHB. Toward a user-guided manipulation framework for high-DOF robots with limited communication. Intell Service Robotics2014; 7: 121–131.
