Forward kinematics analysis of parallel mechanisms with restricted workspace

Abstract

The iterative search method (Newton-Raphson or Quasi-Newton) is an important numerical method for solving the forward kinematics problem of parallel mechanisms. But there may be a failure when the iterative search method solves the forward kinematics problems of a class of mechanisms, whose workspace is restricted. The extreme displacement singularity in the limbs is one reason for the workspace restriction. An equivalent method is proposed to remove the extremely displacement singularity in the limbs, and the forward kinematics solutions of two representative 6 degree of freedom mechanisms are given to illustrate the mechanism equivalence. For the coupled fewer degree of freedom mechanisms, the coupled motion is another reason for the workspace restriction. The virtual mechanism method and modified Jacobian matrix method are applied to solve the forward kinematics problems of this class of mechanisms. Numerical examples are given to validate the theories proposed above.

Keywords

Forward kinematics iterative search method parallel mechanism restricted workspace

Get full access to this article

View all access options for this article.

References

Griffis

Duffy

. A forward displacement analysis of a class of Stewart platforms. J Robotic Syst 1989; 6: 703–720.

Innocenti

Parenti-Castelli

. Direct position analysis of the Stewart platform mechanism. Mech Mach Theory 1990; 25: 611–621.

Wen

Liang

. Displacement analysis of the 6-6 Stewart platform mechanisms. Mech Mach Theory 1994; 29: 547–557.

Wampler

. Forward displacement analysis of general six-in-parallel SPS (Stewart) platform manipulators using soma coordinates. Mech Mach Theory 1996; 31: 331–337.

Boudreau

Turkkan

. Solving the forward kinematics of parallel manipulators with a genetic algorithm. J Robotic Syst 1996; 13: 111–125.

McAree

Daniel

. A fast, robust solution to the Stewart platform forward kinematics. J Robotic Syst 1996; 13: 407–427.

Lim

. Forward kinematics solution of Stewart platform using neural networks. Neurocomputing 1997; 16: 333–349.

Geng Z and Haynes L. Neural network solution for the forward kinematics problem of a Stewart platform. In: IEEE International conference on robotics and automation, Sacramento, California, 9–11 April 1991, pp.2650–2655. IEEE. DOI: 10.1109/ROBOT.1991.132029.

Innocenti C and Parenti-Castelli V. A novel numerical approach to the closure of the 6-6 Stewart platform mechanism. In: Fifth International conference on advanced robotics, ‘Robots in Unstructured Environments’, Pisa, Italy, 19–22 June 1991, pp.851–855. IEEE. DOI: 10.1109/ICAR.1991.240568.

10.

Lee

Shah

. Kinematic analysis of a three-degrees-of-freedom in-parallel actuated manipulator. IEEE J Robot Autom 1988; 4: 354–360.

11.

Waldron

Raghavan

Roth

. Kinematics of a hybrid series-parallel manipulation system. J Dyn Syst Meas Contr 1989; 111: 211–221.

12.

Hashimoto

Imamura

. Kinematic analysis and design of a 3 DoF parallel mechanism for a passive compliant wrist of manipulators. Trans Jpn Soc Mech Eng 1998; C64: 2116–2123.

13.

Pfreundschuh GH, Kumar V and Sugar TG. Design and control of a 3-DoF in-parallel actuated manipulator. In: IEEE International conference on robotics and automation, Sacramento, California, 9–11 April 1991, pp.1659–1664. IEEE. DOI: 10.1109/ROBOT.1991.131857.

14.

Nguyen CC, Zhou ZL, Antrazi SS, et al. Efficient computation of forward kinematics and Jacobian matrix of a Stewart platform-based manipulator. In: IEEE Proceedings of Southeastcon’91, Williamsburg, VA, USA, 7–10 April 1991, pp.869–874. IEEE. DOI: 10.1109/SECON.1991.147884.

15.

Zhao

Peng

. A successive approximation algorithm for the direct position analysis of parallel manipulators. Mech Mach Theory 2000; 35: 1095–1101.

16.

Wang

LCT

Oen

. Numerical direct kinematic analysis of fully parallel linearly actuated platform type manipulators. J Robotic Syst 2002; 19: 391–400.

17.

Zhang

Wang

. Forward kinematics of general Stewart platform and the application. Chin J Mech Eng-CN 2002; 38: 108–112.

18.

Merlet

. Parallel robots, 2nd ed. Heidelberg: Springer, 2006.

19.

Broyden

. A class of methods for solving nonlinear simultaneous equations. Math Comput 1965; 19: 577–593.

20.

Dennis

Toward a unified convergence theory for Newton-like methods. In: Rail

(ed.). Nonlinear functional analysis and applications, New York: Academic Press, 1971, pp. 425–472.

21.

Dennis

Moré

. A characterization of superlinear convergence and its application to quasi-Newton methods. Math Comput 1974; 28: 549–560.

22.

Zhao

. Research on the direct kinematics of the 3-RRRT parallel manipulator. J Tianjin Univ Technol 2010; 26: 15–18.

23.

Ceccarelli M. Parallel manipulator architectures from CAPAMAN design. In: Proceedings of the RAAD 2010, Budapest, Hungary, 24–26 June 2010, pp.187–192. IEEE. DOI: 10.1109/RAAD.2010.5524588.

24.

Liu X, Zhao TS, Luo EJ, et al. Coupling 3-PSR/PSU 5-axis compensation mechanism for stabilized platform and its analysis. Proc IMechE, Part C: J Mechanical Engineering Science 2013: 227: 1619–1629.

25.

Huang

Zhao

. Advanced spatial mechanism, Beijing: China Higher Education Press, 2006.