A strategy for wear analysis using numerical and experimental tools,applied to orbital type hydraulic motors

Abstract

An accurate and reliable wear analysis requires detailed knowledge of the tribological conditions of the studied system. In this work, a numerical model which can quantify wear and is applicable to hydraulic motors is developed. Detailed tribological knowledge can be acquired through strategic experimental testing and numerical simulations. The model is constructed to include the effect on wear from varying lubricant film thickness. The development of the wear model includes consideration of wear observed in the Scanning Electron Microscopy (SEM) analysis of tested motors. The model is of the Archard type, in which the k-value is estimated from experiments, after considering the effect of lubrication. The contact pressure is the solution to a lubrication model that governs both the hydrodynamics of the lubricant film and the direct contact between the rough surfaces. To validate the model, a hydraulic motor is run at different operating conditions and the apparent wear depth is analysed after the tests. Numerical simulations mimicking the same configuration are performed and the predicted wear depths are compared to the experimental results. Similarities and differences are discussed and it is evident that a clear correlation exists between the wear predicted with the model and the measurement data of the apparent wear in the hydraulic motor. There are also discrepancies because of the model simplicity and the uncertainty in the specifications of the tested system. The results imply that wear analysis using numerical simulations aid the understanding of wear in machinery. The combined knowledge of physical conditions on different important scales enables in-depth analysis with numerical tools which cannot be achieved through experimental investigations alone. Furthermore, the numerical model can be refined leading to better wear predictions.

Keywords

Hydraulic motor gerotor wear simulation orbital motor

Get full access to this article

View all access options for this article.

References

Meng

Ludema

. Wear models and predictive equations; their form and content. Wear 1994; 181–183: 443–457.

Archard

. Contact and rubbing of flat surfaces. J Appl Phys 1953; 24: 981–988.

Vargonen

Yang

Huang

. Molecular simulation of tip wear in a single asperity sliding contact. Wear 2013; 307: 150–154.

Lim

Ashby

Brunton

. Wear-rate transitions and their relationship to wear mechanisms. Acta Metal 1987; 35: 1343–1348.

Amari

Khonsari

Brahmeshwarkar

. On the relationship between wear and thermal responce in sliding systems. Tribol Lett 2010; 38: 147–154.

Maxian

Brown

Pederser

. A sliding-distance-coupled finite element formultaion for polyethylene wear in total hip arthroplasty. J Biomech 1996; 29: 687–692.

Põdra

Andersson

. Simulating sliding wear with finite element method. Tribol Int 1999; 32: 71–81.

Sfantos

Aliabadi

. Application of bem and optimization technique to wear problems. Int J Solid Struct 2006; 43: 3626–3642.

Tembleque

Abascal

Aliabadi

. A boundary element formulation for wear modeling on 3 d contact and rolling-contact problems. Int J Solid Struct 2010; 47: 2600–2612.

10.

Andersson

Almqvist

Larsson

. Numerical simulation of a wear experiment. Wear 2011; 271: 2947–2952.

11.

Flodin

Andersson

. A simplified model for wear prediction in helical gears. Wear 2001; 249: 285–292.

12.

Spiegelberg

Andersson

. Simulation of friction and wear in the contact between the valve bridge and rocker arm pad in a cam mechanism. Wear 2006; 261: 58–67.

13.

Põdra

Andersson

. Wear simulation with the winkler surface model. Wear 1997; 207: 79–85.

14.

Öqvist

. Numerical simulations of mild wear using updated geometry with different step size approaches. Wear 2001; 249: 6–11.

15.

Zhu

Martini

Wang

. Simulation of sliding wear in mixed lubrication. Transact ASME 2007; 129: 544–552.

16.

Beheshti

Khonsari

. An engineering approach for the prediction of wear in mixed lubricated contacts. Wear 2013; 308: 121–131.

17.

Dowson

Higginson

. Elasto-hydrodynamic lubrication: The fundamentals of roller and gear lubrication, Oxford: Pergamon Press, 1966.

18.

Griffiths

. Using hydraulic low speed high torque motors. Control Eng 1974; 21: 47–49.

19.

Ding H, Lu XJ and Jiang B. A cfd model for orbital gerotor motors. In: 26th LAHR symposium on hydraulic machinery and systems, Tsinghua University, Beijing, China, 19–23 August 2012.

20.

Jiang

Perng

C-Y

. An efficient 3 d transient computational model for vane oil pump and gerotor oil pump simulations. Sensor Actuator 1997; 1245: 91–100.

21.

Armstrong B and Yuan Q. Multi-level control of hydraulic gerotor motors and pumps. In: Proceedings of the 2006 American Control Conference, Minneapolis, MN, USA, 14–16 June 2006.

22.

Furustig

Larsson

Almqvist

. A wear model for ehl contacts in gerotor type hydraulic motors. Proc IMechE, Part C: J Mechanical Engineering Science 2014; 1: 1–1.

23.

Almqvist

Sahlin

Larsson

. On the dry elastoplastic contact of nominally flat surfaces. Tribol Int 2007; 40: 574–579.

24.

Marsheck

Shen

. Discretization pressure-wear theory for bodies in sliding contact. J Tribol 1989; 111: 95–100.

25.

Lim

Ashby

. Wear-mechanism maps. Acta Metal 1987; 35: 1–24.