The random fibre oscillatory behaviour induced by turbulence in the diffuser of an industrial spunbonding rig is measured experimentally. The turbulent air flow is firstly characterised by constant temperature hot-wire anemometry: averaged flow quantities, such as the mean velocity and the turbulent kinetic energy, as well as time dependent quantities, such as the integral time and the energy spectrum, are measured. The influence of the turbulent flow on the dynamics of a nylon fibre of diameter 200 µm and a spunbonding fibre of diameter 18 µm in the diffuser is then investigated by extracting the transverse displacement from images acquired by a digital camera.
MatsuiM. Air drag on a continuous fibre in melt spinning. T Soc Rheol1976; 20: 465–473.
4.
HearleJWSSultanMAIGovenderS. Form taken by threads laid on a moving belt - I. Experimental study. J Text Inst1976; 67: 373–376.
5.
HearleJWSSultanMAIGovenderS. Form taken by threads laid on a moving belt - II. Mechanisms and theory. J Text Inst1976; 67: 377–381.
6.
HearleJWSSultanMAIGovenderS. Form taken by threads laid on a moving belt - III. Comparison of materials. J Text Inst1976; 67: 382–386.
7.
RaoRSShambaughRL. Vibration and stability in the melt blowing process. Ind Eng Chem1993; 32: 3100–3111.
8.
MarlaVTShambaughRL. Three-dimensional model of the melt-blowing process. Ind Eng Chem2003; 42: 6993–7005.
9.
BoZ. Experimental study and numerical analysis for prediction of the fibre diameter of polylactic acid (PLA) spunbonded nonwovens. Fibres Text East Eur2009; 76: 82–86.
10.
MarheinekeNWegenerR. Modeling and application of a stochastic drag for fibers in turbulent flows. Int J Multiphase Flow2011; 37: 136–148.
11.
KlarAMarheinekeNWegenerR. Hierarchy of mathematical models for production processes of technical textiles. ZAMM2009; 12: 941–961.
12.
GrothausMKlarAMaringerJ. Application of a three-dimensional fiber lay-down model to non-woven production processes. ZAMM2009; 12: 941–961.
13.
OkwuobiPACAzadRS. Turbulence in a conical diffuser with fully developed flow at entry. J Fluid Mech1973; 57: 603–622.
14.
WuTTShambaughRL. Characterization of the melt blowing process with laser doppler velocimetry. Ind Eng Chem1992; 31: 379–389.
15.
BeardJHShambaughRLShambaughBR. On-line measurement of fibre motion during melt blowing. Ind Eng Chem2007; 46: 7340–7352.
16.
Battocchio F and Sutcliffe MPF. Fibre behaviour in the spunbonding process. Part II: Modelling fibre dynamics in the diffuser. Proc IMechE, Part C: J Mechanical Engineering Science 2015.
17.
Battocchio F. Manufacture and characterisation of spunbonded nonwovens. PhD Thesis, University of Cambridge, UK, 2014.
18.
DavidsonPA. Turbulence. An introduction for scientists and engineers, New York: Oxford University Press, 2004.
19.
WhiteFM. Fluid mechanics, New York: McGraw Hill, 2001.
20.
BruunHH. Hot-wire anemometry, principles and signal analysis, New York: Oxford University Press, 1995.
21.
Jorgensen EF. How to measure turbulence with hot-wire anemometers. A practical guide. DANTEC Dynamics, 2002.
22.
BallCGFellouahHPollardA. The flow field in turbulent round free jets. Prog Aerosp Sci2012; 50: 1–26.
23.
OppenheimAV. Discrete-time signal processing, Upper Saddle River: Prentice Hall, 1999.
24.
TaylorGI. The spectrum of turbulence. Proc R Soc A1938; 164: 479–490.
25.
PopeSB. Turbulent flows, Cambridge: Cambridge University Press, 2000.
26.
GonzalesRCWoodsREEddinsSL. Digital image processing using MATLAB, Knoxville, TN: Gatesmark Publishing, 2009.
27.
RossS. A first course in probability, Upper Saddle River: Prentice Hall, 1998.
