Experimental and numerical study of flow characteristics of flat-walled diffuser/nozzles for valveless piezoelectric micropumps

Abstract

The flat-walled diffuser/nozzles are classified into two types, i.e. Tube I and Tube II, based on their different flow resistance characteristics. Tube I has less pressure loss coefficients in the diffuser direction than the nozzle direction, and Tube II has larger pressure loss coefficients in the diffuser direction than the nozzle direction. This work focuses on the characterization of the diffuser efficiency, and flow rectification of these two types of diffuser/nozzles. The characterization is performed with diverging angles in the range of 5°–60° and length–width ratios in the range of 1–20, and the pressure drop ranging from 1 to 10 kPa. The results show that with the increase in pressure drop and the decrease in length–width ratio, Tube I type of diffuser/nozzles can change to Tube II. For Tube I type of diffuser/nozzles, the smaller the diverging angle and the longer the length, the better the performance. For Tube II type of diffuser/nozzles, the larger the diverging angle and shorter the length, the better the flow rectification performance. Simulation results match well with the experiment data. Of particular interest, simulation of the diffuser flow fields suggests that the flow separation has a significant impact on pressure loss coefficients in the diffuser direction.

Keywords

Valveless piezoelectric micropumps flat-walled diffuser/nozzles flow resistance characteristics numerical simulation micromachining

Get full access to this article

View all access options for this article.

References

LaVan

McGuire

Langer

. Small-scale systems for in vivo drug delivery. Nat Biotechnol 2003; 21: 1184–1191.

Junwu

Zhigang

Taijiang

. Design and test of a high-performance piezoelectric micropump for drug delivery. Sens Actuators A 2005; 121: 156–161.

Cui

Liu

Zha

. Study on a piezoelectric micropump for controlled drug delivery system. Microfluid Nanofluid 2007; 3: 377–390.

Schluter M, Kampmeyer U, Tahhan I, et al. A modular structured, planar micro pump with no moving part(NMP) valve for fluid handling in microanalysis systems. In Proceedings of the 2nd annual international on IEEE-EMBS special topic conference on microtechnologies in medicine and biology, 2–4 May 2002, Madison, WI. New York: IEEE.

Andersson

van der Wijngaart

Nilsson

. A valve-less diffuser micropump for microfluidic analytical systems. Sens Actuators B 2001; 72: 259–265.

Cheng

Chien

. Ejection characteristics of micropump for motorcycle fuel atomizer in high-temperature environment. Appl Therm Eng 2007; 28: 94–109.

Zhang

Wang

. Valveless piezoelectric micropump for fuel delivery in direct methanol fuel cell (DMFC) devices. J Power Sources 2005; 140: 72–80.

Verma

Chatterjee

Nagarajan

. Design and development of a modular valveless micropump on a printed circuit board for integrated electronic cooling. J Mech Eng Sci 2009; 223: 953–963.

Sheen

Hsu

. Experimental study of flow characteristics and mixing performance in a PZT self-pumping micromixer. Sens Actuators A 2007; 139: 237–244.

10.

Wiederkehr

Salvadori

Brugger

. The gas flow rate increase obtained by an oscillating piezoelectric actuator on a micronozzle. Sens Actuators A 2008; 144: 154–160.

11.

Dopper

Clemens

Ehrfeld

. Micro gear pumps for dosing of viscous fluids. J Micromech Microeng 1997; 7: 230–232.

12.

Yamahata

Chastellain

Parashar

. Plastic micropump with ferrofluidic actuation. J Microelectromech Syst 2005; 14: 94–102.

13.

Ehlert

Hlushkou

Tallarek

. Electrohydrodynamics around single ion-permselective glass beads fixed in a microfluidic device. Microfluid Nanofluid 2008; 4: 471–487.

14.

Nguyen

Kassegne

. High-current density dc magenetohydrodynamics micropump with bubble isolation and release system. Microfluid Nanofluid 2008; 5: 383–393.

15.

Xuan

Werner

. Electroosmotic flow in microchannels with prismatic elements. Microfluid Nanofluid 2007; 3: 151–160.

16.

Mugele

Baret

. Electrowetting: from basics to applications. J Phys Condens Matter 2005; 17: 705–774.

17.

Haik

Kilani

Hendrix

. Flow field analysis in a spiral viscous micropump. Microfluid Nanofluid 2007; 3: 527–535.

18.

Stemme

. A valveless diffuser/nozzle-based fluid pumps. Sens Actuators A 1993; 39: 159–167.

19.

Gerlach

Wurmus

. Working principle and performance of the dynamic micropump. Sens Actuators A 1995; 50: 135–140.

20.

Olsson

Stemme

. Diffuser-element design investigation for valve-less pumps. Sens Actuators A 1996; 57: 137–143.

21.

Jiang

Zhou

Huang

. Micronozzle/diffuser flow and its application in micro valveless pumps. Sens Actuators A 1998; 70: 81–87.

22.

Olsson

Stemme

. Numerical and experimental studies of flat-walled diffuser elements for valve-less micropumps. Sens Actuators A 2000; 84: 165–175.

23.

Singhal

Garimella

Murthy

. Low Reynolds number flow through nozzle/diffuser element in valveless micropumps. Sens Actuators A 2004; 113: 226–235.

24.

Yang

Chen

Shew

. Investigation of the flow characteristics within a micronozzle/diffuser. J Micromech Microeng 2004; 14: 26–31.

25.

Sung

Yang

. Effect of the half angle on the flow rectification of dynamic microdiffusers. J Micromech Microeng 2007; 17: 2031–2038.

26.

Chen

Kang

. Fabrication and investigation of PDMS micro-diffuser/nozzle. J Mater Process Technol 2008; 198: 478–484.

27.

Wang

Hsu

Kuo

. Loss characteristics and flow rectification property of diffuser valves for micropump applications. Int J Heat Mass Transf 2009; 52: 328–336.

28.

Olsson

Larsson

Holm

. Valve-less diffuser micropumps fabricated using thermoplastic replication. Sensors Actuators A 1998; 64: 63–68.

29.

Xia

Tadigadapa

Zhang

. Electroactive polymer based microfluidic pump. Sensors Actuators A 2006; 125: 346–352.

30.

White

. Fluid mechanics, 4th ed. Singapore: WCB/McGraw-Hill, 1999.

31.

Zhuo

Yang

. Analysis on flow characteristic of flat-walled diffusers applied in valveless piezoelectric pumps. J Drain Irrig Mach Eng 2012; 30: 532–537.

32.

Heschel

Muellenborn

Bouwstra

. Fabrication and characterization of truly 3-D diffuser/nozzle microstructures in silicon. J Microelectromech Syst 1997; 6: 41–47.

33.

Morris

Forster

. Low-order modeling of resonance for fixed-valve micropumps based on first principles. J Microelectromech S 2003; 12: 325–334.

34.

Yuan

Yang

. Design and experimental study of a novel three-way diffuser/nozzle elements employed in valveless piezoelectric micropumps. J Braz Soc Mech Sci Eng 2015; 37(1): 221–230.

35.

ANSYS Inc. ANSYS CFX 11.0, 2008.

36.

Mala

. Flow characteristics of water in microtubes. Int J Heat Fluid Flow 1999; 20: 142–148.

37.

Peng

Peterson

Wang

. Heat transfer characteristics of water flowing through microchannels. Exp Heat Transf 1994; 7: 265–283.

38.

Hsieh

Lin

Huang

. Liquid flow in a microchannel. J Micromech Microeng 2004; 14: 436–445.

39.

Hetsroni

Mosyak

Pogrebnyak

. Fluid flow in micro-channels. Int J Heat Mass Transfer 2005; 48: 1982–1998.

40.

Kohl

Abdel-Khalik

Jeter

. An experimental investigation of microchannel flow with internal pressure measurements. Int J Heat Mass Transfer 2005; 48: 1518–1533.

41.

Menter

. Two-equation eddy-viscosity turbulence Models for engineering applications. AIAA J 1994; 32: 1598–1605.

42.

Menter FR, Kuntz M and Langtry R. Ten years of industrial experience with the SST turbulence model. In: Proceedings of the 4th international symposium on turbulence, heat and mass transfer, Antalya, Turkey, 12–17 October 2003, pp.625–632.

43.

Fox

Kline

. Flow regime data and design methods for curved subsonic diffusers. Transactions of the ASME Journal of Basic Engineering 1962; 84: 303–312.

44.

Smith

Kline

. An experimental investigation of the transitory stall regime in two-dimensional diffusers. J Fluids Eng 1974; 96: 11–15.

45.

Allery

Guerin

Hamdouni

. Experimental and numerical POD study of the Coanda effect used to reduce self-sustained tones. Mech Res Commun 2004; 31: 105–120.