The Gough-Stewart platform has been successfully used in a wide variety of fields ranging from medical to automotive applications. This paper proposes a 6-RRRPRR parallel manipulator with orthogonal non-intersecting RR-joint configurations and ball screw actuators without guide mechanisms. A novel methodology is developed to define the dependent RR-joint variables and a numerical algorithm is employed to calculate the joint variables. The parasitic motion caused by the helical motion of the ball screw can be expressed and solved with vector method. The inverse kinematics of this manipulator can be solved. To verify the effectiveness of the proposed approach, simulations are performed with software package ADAMS. A prototype of this manipulator is manufactured. Its resolution, accuracy, and repeatability are measured. It is shown that the presented method is effective for this parallel manipulator.
GoughV. Contribution to discussion of papers on research in automobile stability, control and tyre performance. Proc Inst Mech EngAuto Div1956; 171: 392–395.
2.
StewartD. A platform with six degrees of freedom. Proc Inst Mech Eng1965; 180: 371–384.
3.
HuntKHPrimroseEJF. Assembly configurations of some in-parallel-actuated manipulators. Mech Mach Theory1993; 28: 31–42.
PatelYDGeorgePM. Parallel Manipulators applications – a survey. Mod Mech Eng2012; 2: 57–64.
6.
MatthiasWVolkerUThomasW. A Stewart platform for precision surgery. Transac Inst Measure Control2003; 25: 329–334.
7.
Michael LP. Workspace analysis of a linear delta robot: calculating the inscribed radius. Master Thesis, Rose-Hulman Institute of Technology, US, 2014.
8.
YangJFXuZBWUQW. Design of six dimensional vibration isolation system for space optical payload. Optic Precis Eng2015; 23: 1347–1357.
9.
Ngoc P, Kim JH and Kim HS. Development of a new 6-DOF parallel-kinematic motion simulator. In: International Conference on control, automation and systems, Seoul, Korea, 14–17 October 2008, pp.2370–2373. IEEE Conference.
10.
SaltarenRGarciaCAvarezC. Experiences and results from designing and developing a 6-DOF underwater parallel robot. Robot Auton Syst2011; 59: 101–112.
11.
SabaterJSaltarénRAracilR. Teleoperated parallel climbing robots in nuclear installations. Ind Robot Int J2006; 33: 381–386.
12.
OscarAYonSMEnriqueA. Motion pattern analysis of parallel kinematic machines: a case study. Robot Comput Integr Manuf2009; 25: 432–440.
13.
BhaskarDMruthyunjayaTS. The Stewart platform manipulator: a review. Mech Mach Theory2000; 35: 15–40.
14.
KhalilWGueganS. Inverse and direct dynamic modeling of Gough-Stewart robots. IEEE Transac Robot2004; 20: 754–761.
15.
KuDM. Forward kinematic analysis of a 6-3 type Stewart platform mechanism. Proc IMechE, Part J: J Engineering Tribology2000; 214: 233–241.
16.
LianBBSunTSongYM. Stiffness Analysis and experiment of a novel 5-DoF parallel kinematic machine considering gravitational effects. Int J Mach Tools Manuf. Epub ahead of print 12 April 2015. DOI: 10.1016/j.ijmachtools.
17.
ZhangDBiZLiB. Design and kinetostatic analysis of a new parallel manipulator. Robot Comput Integr Manuf2009; 25: 782–791.
18.
JaimeGAHoracioOMAlvaroSR. Kinematic analyses of novel translational parallel manipulators. Proc IMechE, Part C: J Mechanical Engineering Science2014; 228: 330–341.
19.
LaskiPATakosogluJEBlasiakS. Design of a 3-DOF tripod electro-pneumatic parallel manipulator. Robot Auton Syst. Epub ahead of print 9 April 2015. DOI: 10.1016/j.robot.
20.
Tsai LW. Kinematics of a three-DOF platform with three extensible limbs. In: International symposium on advances in robot kinematics, Portoroz Bernardin, Slovenia, 22–26 June, 1996, pp.401–410. Netherlands: Springer.
21.
JiPWuHT. Kinematic analysis of an offset 3-UPU translational parallel robotic manipulator. Robot AutonSyst2003; 42: 117–123.
22.
HuBLuY. Analyses of kinematics, statics, and workspace of a 3-RRPRR parallel manipulator and its three isomeric mechanisms. Proc IMechE, Part C: J Mechanical Engineering Science2008; 222: 1829–1837.
23.
DalvandMMShirinzadehB. Forward kinematics analysis of offset 6-RRCRR parallel manipulators. Proc IMechE, Part C: J Mechanical Engineering Science2011; 225: 3011–3018.
24.
Dalvand MM and Shirinzadeh B. Inverse kinematics analysis of 6-RRCRR parallel manipulators. In: IEEE/ASME international conference on advanced intelligent mechatronics, Wollongong, Australia, 9–12 July 2013, pp.644–648. IEEE Conferences.
25.
LiuGJZhengSTPeterO. Inverse kinematic and dynamic analyses of 6-UCU parallel manipulator. Appl Mech Mater2012; 127: 172–180.
26.
JaimeGAHoracioOMAlvaroSR. Kinematic analyses of novel translational parallel manipulators. Proc IMechE, Part C: J Mechanical Engineering Science2014; 228: 330–341.
27.
MerletJP. Solving the forward kinematics of a Gough-type parallel manipulator with interval analysis. Int J Robot Res2004; 23: 221–236.
28.
RaghavanM. The Stewart platform of general geometry has 40 configurations. ASME J MechDes1993; 115: 227–282.
29.
MorellATarokhMAcostaL. Solving the forward kinematics problem in parallel robots using support vector regression. Eng Appl Artif Intell2013; 26: 1698–1706.
30.
Merlet JP. Closed-form resolution of the direct kinematics of parallel manipulator using extra sensors data. In: IEEE international conference on Robotics and Automation, Atlanta, 2–7 May 1993, pp.200–204. IEEE Conferences.
31.
HustyM. An Algorithm for solving the direct kinematics of general Stewart-Gough platform. Mech Mach Theory1996; 31: 365–380.
32.
DalvandMMShirinzadehB. Kinematics analysis of 6-DOF parallel Micro-manipulators with offset U-joints: a case study. Int J Intell Mechatron Robot2012; 2: 28–40.
33.
RainerGBrianL. Challenges of extreme load hexapod design and modularization for large ground-based telescopes. Proc SPIE2010; 7739: 1–11.
34.
MichaelCDanielBBernieJ. Practical considerations of joint friction and backlash in large ground-based telescope secondary optic pointing systems. Proc SPIE2008; 7018: 1–12.
35.
VictorSMichaelMMechanisms and actuation. In: WaldronKSchmiedelerJ (eds). Handbook of robotics, New York, NY: Springer, 2008, pp. 83–83.
36.
RyanCSMichaelFCTrevorSC. Six degree of freedom, sub-micrometer positioning system for secondary mirrors. Proc SPIE2010; 7733: 1–11.
