A numerical study on the unsteady effect of axial spacing on the performance in a contra-rotating axial compressor

Abstract

Unsteady numerical simulations are conducted to investigate the unsteady effects of axial spacing on the performance of a contra-rotating axial compressor. The results show that the stage efficiency is dominant by unsteady effects between two rotors at lower axial gap ranges. As the axial spacing is increased, the variation of aerodynamic force is different for the two rotors. As a whole, the oscillation on the pressure surface is much stronger than that on the suction side in rotor1. For rotor2, however, the local maximum amplitude is just located at the blade leading edge, especially near the tip region. Additionally, the maximum amplitude of the pressure fluctuations generally decreases with an increase of axial spacing. The dominating frequency is different for monitors located at different positions and varies with the increasing of axial gaps. As the axial gap is increased, the potential effects decay in the process of propagating. Meanwhile, the incoming wakes are mixed out more sufficiently which would reduce the fluctuations at leading edge of rotor2. Therefore, a proper axial spacing should be chosen in the design process of a contra-rotating axial compressor considering both the performance and structure.

Keywords

Contra-rotating axial compressor frequency characteristics aerodynamic force axial spacing fluctuation

Get full access to this article

View all access options for this article.

References

Fleeter

Jay

Bennett

. Wake induced time-variant aerodynamics including rotor-stator axial spacing effects. J Fluids Eng 1981; 103: 59–66.

Gallus

Grollius

Lambertz

. The influence of blade number ratio and blade row spacing on axial-flow compressor stator blade dynamic load and stage sound pressure level. J Eng Gas Turbine Power 1982; 104: 633–641.

Smith

. Casing boundary layers in multistage axial-flow compressors. Flow Res Blad 1970; 106: 635–647.

Mikolajczak

. The practical importance of unsteady flow. Unsteady Phenomena Turbomach. AGARD CP-144, 1977.

Smith

. Wake dispersion in turbomachines. J Fluids Eng 1966; 88: 688–690.

Smith

. Wake ingestion propulsion benefit. J Propul Power 1993; 9: 74–82.

Hetherington

Moritz

. Influence of unsteady flow phenomena on the design and operation of aero engines. Unsteady Phenomena Turbomach. AGARD-CP-177, 1976.

Gundy-Burlet

Dorney

. Investigation of airfoil clocking and inter-blade-row gaps in axial compressors. AIAA Paper 1997; 97: 3008–3008.

Zachcial A and Nuürnberger D. A numerical study on the influence of vane-blade spacing on a compressor stage at sub-and transonic operating conditions. ASME Turbo Expo 2003, ASME paper No.GT2003-38020.

10.

Inoue

Kuroumaru

Yoshida

. Short and long length-scale disturbances leading to rotating stall in an axial compressor stage with different stator/rotor gaps. J Turbomach 2002; 124: 376–384.

11.

Joly M, Verstraete T and Paniagua G. Full design of a highly loaded and compact contra-rotating fan using multidisciplinary evolutionary optimization. ASME Turbo Expo 2013, ASME paper No.GT2013-94433.

12.

Schimming

. Counter rotating fans-an aircraft propulsion for the future? J Therm Sci 2003; 12: 97–103.

13.

Roy

Rao

. Ducted contra-rotating axial flow fan performance studies. IGTI, ASME COGENTURBO 1989; 4: 469–475.

14.

Roy B, Ravibabu K and Srinivasa Rao. Flow studies in ducted twin-rotor contra-rotating axial flow fans. ASME Turbo Expo 1992, ASME paper No.GT1992-390.

15.

Sharma

Jain

Pundhir

. A study of some factors affecting the performance of a contra-rotating axial compressor stage. Proc IMechE, Part A: J Power and Energy 1988; 202: 15–21.

16.

Pundhir

Sharma

. A Study of aerodynamic performance of a contra rotating axial compressor stage. Defence Sci J 2013; 42: 191–199.

17.

Nouri H, Ravelet F, Bakir F, et al. Experimental investigation on ducted counter-rotating axial flow fans. In: ASME-JSME-KSME joint fluids engineering conference, Hamamatsu, Japan, 24–29 July, 2011, AJK paper No.GT2011-22061.

18.

Nouri H, Ravelet F, Bakir F, et al. Experimental investigations on the design of a ducted counter-rotating axial flow fans system. In: 46th symposium of applied aerodynamics-aerodynamics of rotating bodies, 2011: FP16-2011-nouri.

19.

Gao L, Li X, Xie J, et al. The effect of speed ratio on the first rotating stall stage in contra-rotating compressor. ASME Turbo Expo 2012, ASME paper No.GT2012-68802.

20.

Gao L, Li X, Feng X, et al. The effect of tip clearance on the performance of contra-rotating compressor. ASME Turbo Expo 2012, ASME paper No.GT2012-68801.

21.

NUMECA International. Theoretical manual of FINE™/Turbo v8.7, Belgium: Brussels: Author, 2009.

22.

Spalart PR and Allmaras SR. A One equation turbulence model for aerodynamic flows. AIAA Paper No. 92-0439.

23.

Jameson A. Time-dependent calculations using multigrid, with application to unsteady flows past airfoils and wings. AIAA Paper No.91-1596.

24.

Wang

Chen

. Effects of tip clearance size on the performance and tip leakage vortex in dual-rows counter-rotating compressor. Proc Inst Mech Eng G J Aerosp Eng 2015; 229(11): 1953–1965.

25.

Zambonini G and Ottavy X. Unsteady pressure investigations of corner separated flow in a linear compressor cascade. ASME Turbo Expo 2015, ASME paper No.GT2015-42073.

26.

Liu Y, Yan H and Lu L. Investigation of corner separation in a linear compressor cascade using DDES. ASME Turbo Expo 2015, ASME paper No.GT2015-42902.

27.

Zhang HW, Deng XY, Lin F, et al. A study on the mechanism of tip leakage flow unsteadiness in an isolated compressor rotor. ASME Turbo Expo 2006, ASME paper no. GT2006-91123.

28.

Geng SJ. Numerical study on the unsteady response of compressor tip leakage flow to discrete micro tip injection and its effect on stability enhancement. Graduate School of the Chinese Academy of Sciences, Beijing, China.

29.

Lin

Chen

. Flow structures in the tip region for a transonic compressor rotor. J Turbomach 2013; 135: 031012–031012.