Improved elliptical triangulation method for damage detection in composite material structures

Abstract

In this paper, an improvement of the elliptical triangulation method for damage detection using Lamb waves is presented. The damage is the main cause of structural failure and often occurs on structures. In order to avoid sudden failure, a special attention was given in the past decades to the damage detection in structures. In order to obtain efficient damage detection techniques, the structural health monitoring has been the main research topic of many scientists worldwide. The elliptical triangulation method, proposed in this paper, is a non-destructive method based on measurement of Lamb waves. This method, through the calculation of the time of flight of the signals and the actuator-sensor positioning, allows to identify position and dimension of the damage. The application of the method to the metallic structures and to the composite material structures is presented in this paper. The complexity connected with the uncertainty of the waves’ propagation speed due to the anisotropy of the composite materials has been explored through an iterative approach. The initialization of the wave propagation speed at first tentative iteration is the key issue for the convergence of the method. Seven different conditions were used to validate the method on both metallic and composite structures combining two damage shapes, two damage dimensions (effective damaged area), and three different positions. Upon evaluating the effectiveness, the method has been applied at two composite panels in order to detect by test the post-impact damages. Tests results have been compared with the numerical ones. The feasibility of the elliptical triangulation method to detect the damage (evaluating the damage position and area) has been proved using the ultrasonic C-Scan.

Keywords

Composite structures modeling experimental investigations damage detection

Get full access to this article

View all access options for this article.

References

Doebling

Farrar

Prime

. A summary review of vibration-based damage identification methods. Shock Vib Digest 1998; 30: 91–105.

Doebling SW, Farrar CR, Prime MB, et al. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review. Los Alamos National Laboratory Report LA-13070-MS, Los Alamos, NM, 1996.

Montalvao

Maia

NMM

Ribeiro

AMR

. A review of vibration-based Structural Health Monitoring with special emphasis on composite materials. Shock Vib Digest 2006; 38: 295–324.

Salawu

. Detection of structural damage through changes in frequency: A review. Eng Struct 1997; 19: 718–723.

Jiang

Tang

Wang

. Structural damage detection using sensitivity enhancing feedback control through eigenstructure assignment. Proc SPIE 6174 2006.

Lorenzo

Petrone

Manzato

et al.

Damage detection in wind turbine blades by using operational modal analysis. Struct Health Monitor 2016; 15: 289–301.

Mobasher

Stang

Shah

. Micro-cracking in fibre reinforced concrete. Cem Concr Res 1990; 20: 665–676.

Stokes

Cloud

. The application of interferometric techniques to the nondestructive inspection of fiber-reinforced materials. Exp Mech 1993; 33: 314–319.

Liang

Sun

Rogers

. Coupled electromechanical analysis of adaptive material systems - Determination of the actuator power consumption and energy transfer. J Intell Mater Syst Struct 1994; 5: 12–20.

10.

Bhalla

Soh

. Structural health monitoring by piezo-impedance transducers. I: Modelling. J Aerosp Eng 2004; 17: 154–165.

11.

Bhalla

Soh

. Electromechanical impedance modelling for adhesively bonded piezo-transducers. J Intell Mater Syst Struct 2004; 15: 955–972.

12.

Colla

Lausch

. Influence of source frequency on impact-echo data quality for testing concrete structures. NDT&E Int 2002; 36: 203–213.

13.

Rose J. A vision of ultrasonic guided wave inspection potential. In: Proceedings of the seventh ASME NDE topical conference, NDE 20, 2001, pp.1–5.

14.

. Guided Lamb waves for identification of damage in composite structures: A review. J Sound Vib 2006; 295: 753–780.

15.

Banerjee

Ricci

Monaco

et al.

A wave propagation and vibration-based approach for damage identification in structural components. J Sound Vib 2009; 322: 167–183.

16.

Kim

Mehlem

. Damage detection of structures by wavelet analysis. Eng Struct 2004; 26: 347–362.

17.

Yan

Yam

. Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis. Compos Struct 2002; 58: 9–38.

18.

De Fenza

Sorrentino

Vitiello

. Application of artificial neural networks and probability ellipse methods for damage detection using Lamb waves. Compos Struct 2015; 133: 390–403.

19.

Wang

et al.

Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffeners. Compos Sci Technol 2009; 66: 2054–2063.

20.

De Fenza A, Petrone G, Pecora R, et al. Post-impact damage detection on a winglet structure realized in composite material. Compos Struct (In Press).

21.

Silva C, Rocha B and Suleman A. Guided Lamb waves based structural health monitoring through a PZT network system. In: 2nd international symposium on NDT in Aerospace 2010, Germany, 2010.