The paper describes a multi-domain simulation of a gerotor oil pump. Three different analysis tools have been used in synergy to predict the pump flow rate, in both conditions of complete and incomplete filling, and the pressure ripple. The computational fluid dynamics software PumpLinx® has been used for the determination of the discharge coefficients, while a finite element model analysis performed with ANSYS® has allowed the evaluation of the deflection of the pump cover under the action of the delivery pressure. The data calculated with the 3D tools have been utilized as input for a lumped parameter model of the pump developed in LMS Amesim® with customized libraries. The aim of the study is to supply the guidelines for tuning the models using a reduced number of computational fluid dynamics simulations. The results collected in the experimental campaign have demonstrated that a lumped parameter approach can be suitable, if properly calibrated, to predict the pressure oscillations in conditions of defective filling. Moreover, it was found that the cover deflection has a significant importance not only on the leakages, but also on the pressure ripple.
Jiang Y and Perng C. An efficient 3D transient computational model for vane oil pump and gerotor oil pump simulations. SAE paper 97084, 1997.
2.
IudicelloFMitchellDCFD modelling of the flow in a gerotor pump. In: BurrowsCREdgeKA (eds). Power transmission and motion control, Bath, UK, 2002, pp. 53–63.
Karthikeyan N, Suresh KJ and Ganesan V. Development of a gerotor oil pump using CFD. In: Proceedings of the 4th international conference on fluid mechanics and fluid power, Chennai, India, 16–18 December 2010.
5.
Ruvalcaba MA and Hu X. Gerotor fuel pump performance and leakage study. In: Proceedings of the ASME 2011 international mechanical engineering Congress & exposition, Denver, USA, 11–17 November 2011.
6.
Garcia-VilchezMGamez-MonteroPJCodinaE. Computational fluid dynamics and particle image velocimetry assisted design tools for a new generation of trochoidal gear pumps. Adv Mech Eng2015; 7: 1–14.
7.
Suresh KumarMManonmaniK. Numerical and experimental investigation of lubricating oil flow in a gerotor pump. Int J Automot Technol2011; 12: 903–911.
8.
Gamez-MonteroPJCastillaRdel CampoD. Influence of the interteeth clearances on the flow ripple in a gerotor pump for engine lubrication. Proc IMechE, Part D: J Automobile Engineering2012; 226: 930–942–930–942.
9.
BaeJHKwakHSSanS. Design and CFD analysis of gerotor with multiple profiles (ellipse–involute–ellipse type and 3-ellipses type) using rotation and translation algorithm. Proc IMechE, Part C: J Mechanical Engineering Science2016; 230: 804–823–804–823.
10.
FrosinaESenatoreABuonoD. A tridimensional CFD analysis of the oil pump of an high performance motorbike engine. Energy Procedia2014; 45: 938–948–938–948.
11.
Sang X, Zhou X and Liu X. Numerical simulation of an inner engaging gerotor based on the optimization of inlet and outlet cavities. In: 5th International conference on advanced design and manufacturing engineering, Shenzhen, China, 19–20 September 2015.
12.
HsiehCF. Flow characteristics of gerotor pumps with novel variable clearance designs. J Fluids Eng2015; 137: 041107–041107.
13.
HaoCWenmingYGuangmingL. Design of gerotor oil pump with new rotor profile for improving performance. Proc IMechE, Part C: J Mechanical Engineering Science2016; 230: 592–601–592–601.
14.
AltareGRundoM. Computational Fluid Dynamics Analysis of gerotor lubricating pumps at high speed: geometric features influencing the filling capability. J Fluid Eng2016; 138: 111101–111101.
15.
MancòSNervegnaNRundoM. Gerotor lubricating oil pump for IC engines. SAE Transact J Engine1998; 107: 2267–2284.
16.
Neyrat S, Orand N and Jonquet D. Modelling and analysis of an automatic transmission internal gear oil pump with cavitation. SAE paper 2005-01-2448, 2005.
17.
Kim MS, Chung WJ, Jang JH, et al. Application of SolidWorks® & AMESim®-based Simulation technique to modeling, cavitation, and back-flow analyses of trochoid hydraulic pump for multi-step transmission. In: Proceedings of the international conference on scientific computing, Las Vegas, USA, 16–19 July 2012.
18.
FrosinaESenatoreABuonoD. Analysis and simulation of an oil lubrication pump for internal combustion engines. J Fluid Eng2015; 137: 051102–051102.
19.
Pellegri M, Vacca A, Devendran RS, et al. A lumped parameter approach for GEROTOR pumps: model formulation and experimental validation. In: 10th International fluid power conference, Dresden, Germany, 8–10 March 2016.
20.
PellegriMVaccaA. Numerical simulation of Gerotor pumps considering rotor micro-motions. Meccanica2016. (in press). DOI: 10.1007/s11012-016-0536-6.
21.
HarrisonJAiharaREiseleF. Modeling gerotor oil pumps in 1D to predict performance with known operating clearances. SAE Int J Engine2016; 9: 1839–1846–1839–1846.
22.
SchweigerWSchoefmannWVaccaA. Gerotor pumps for automotive drivetrain applications: a multi domain simulation approach. SAE Int J Passeng Cars2011; 4: 1358–1376.
23.
PellegriMVaccaAFrosinaE. Numerical analysis and experimental validation of Gerotor pumps: A comparison between a lumped parameter and a computational fluid dynamics-based approach. Proc IMechE, Part C: J Mechanical Engineering Science2016. (in press). DOI: 10.1177/0954406216666874.
24.
DharSAfjehHSrinivasanC. Transient, three dimensional CFD model of the complete engine lubrication system. SAE Int J Engine2016; 9: 1854–1862–1854–1862.
25.
Rundo M and Squarcini R. Discrete pressure controls in IC engine lubricating pumps. In: Proceedings of the ASME international mechanical engineering Congress and exposition, Denver, USA, 11–17 November 2011.
26.
DingHVisserFCJiangY. Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications. ASME J Fluid Eng2011; 133: 011101–011101.
27.
SinghalAKAthavaleMMLiH. Mathematical basis and validation of the full cavitation model. ASME J Fluid Eng2002; 124: 617–624.
28.
Ippoliti L and Berten O. Influence of inlet piping conditions on the performance of an aircraft engine lubrication system pump. In: 9th National Congress on theoretical and applied mechanics, Brussels, Belgium, 9–11 May 2012.
29.
Rundo M. On the dynamics of pressure relief valves with external pilot for ICE lubrication. In ASME international mechanical engineering Congress and exposition, Montreal, Canada, 14–20 November 2014.
30.
Rundo M. Energy consumption in ICE lubricating gear pumps. SAE 2010-01-2146, 2010.
31.
Kini S, Mapara N, Thoms R, et al. Numerical simulation of cover plate deflection in the gerotor pump. SAE Paper 2005-01-1917, 2005.
32.
RundoMCorvagliaA. Lumped parameters model of a crescent pump. Energies2016; 9: 876–876.
33.
MerrittHE. Hydraulic control systems, New York, NY: John Wiley & Sons, Inc., 1967.
34.
FabianiMMancòSNervegnaN. Modelling and simulation of gerotor gearing in lubricating oil pumps. SAE Transact J Engine1999; 108: 989–1003.
35.
MancòGMancòSRundoM. Computerized generation of novel gearings for internal combustion engines lubricating pumps. Int J Fluid Power2000; 1: 49–58–49–58.
36.
RundoMSquarciniR. Modelling and simulation of brake booster vacuum pumps. SAE Int J Commer Veh2013; 6: 236–248.
37.
RundoMNervegnaN. Lubrication pumps for internal combustion engines: a review. Int J Fluid Power2015; 16: 59–74.
38.
RundoM. Piloted displacement controls for ICE lubricating vane pumps. SAE Int J Fuel Lubr2010; 2: 176–184.
39.
MancòSNervegnaNRundoM. Effects of timing and odd/even number of teeth on noise generation of gerotor lubricating pumps for IC Engines. SAE Transact J Commercial Veh2000; 109: 407–416.
40.
Furno F and Blind V. Effects of air dissolution dynamics on the behaviour of positive-displacement vane pumps: a simulation approach. In: 10th International fluid power conference, Dresden, Germany, 8–10 March 2016.
