Laser ternary Hf-Nb-Zr composites coatings on Ti6Al4V alloy for biomedical application

Abstract

Ti6Al4V alloy has been found to be the leading material for hip replacement due to its biocompatibility and good yield strength; however poor corrosion and wear properties are experienced in human tissue surroundings. Laser metal deposition was accomplished on Ti6Al4V alloy using: 25Hafnium, 50Niobium, and 25Zirconium reinforcements with the aid of Nd:YAG Rofin Sinar laser. Characterization of the produced deposits was carried out by optical microscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy and X-ray diffraction. Hardness, corrosion and wear analyses were also done. Microstructure of 25Hf-50Nb-25Zr coatings indicated homogeneous microstructures of both α and β phases. More α acicular phases were formed than β phases. The 25Hf-50Nb-25Zr coating on Ti6Al4V reduced the content of aluminium and vanadium on the substrate. Maximum hardness value and lowest volume wear rate were obtained at laser power of 1250 W with hardness values of 599.18 HV and 0.6 m³ volume wear loss. Improvement in corrosion resistance of 99.98% was obtained. It was established that improved properties were obtained after laser surface cladding of 25Hf-50Nb-25Zr on Ti6Al4V alloy.

Keywords

Ti6Al4V alloy microstructure corrosion laser

Get full access to this article

View all access options for this article.

References

Linag

Mei

et al.

Microstructures of laser-deposited Ti6Al4V. Mater Des 2004; 25: 137–144.

Okazaki

Gotoh

. Comparison of metal release from various metallic biomaterials in vitro. Biomaterials 2005; 26: 11–21.

Gomes

Moreira

Santos

VJSV

et al.

Assessment of the genetic risks of a metallic alloy used in medical implants. Genet Mol Biol 2011; 34: 116–121.

Lin

Chern-Lin

. A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys. Biomaterials 2005; 26: 2899–2907.

Popoola

API

Ochonogor

Abdulwahab

. Corrosion and hardness characteristics of laser surface-modified Ti6Al4V/Zr+TiC and Ti6Al4V/Ti+TiC composites. Int J Electrochem Sci 2013; 8: 2449–2458.

El-Labban

Mahmoud

ERI

Al-Wadai

. Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles. Adv Prod Eng Manag 2014; 9: 159–167.

Khosroshahi

Characterization and evaluation of surface modified titanium alloy by pulse Nd:YAG laser for orthopaedic applications. In: Laskovski

(ed). Biomedical engineering, trends in materials science, Croatia: Intech, 2011, pp. 169–202.

Han

M-K

Kim

Hwang

et al.

Effect of Nb on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys. Materials 2015; 8: 5986–6003.

Gonzales

Pena

Manero

et al.

Design and characterization of new Ti-Nb-Hf alloys. J Mater Eng Perform 2009; 18: 490–495.

10.

Geng

Banerjee

Hill

et al.

Structure of TiB precipitates in laser deposited in situ, Ti6Al4V-TiB composites. Mater Lett 2006; 60: 859–863.

11.

Galvan

Ocelik

Pei

et al.

Microstructure and properties of TiB/Ti6Al4V coatings produced with laser treatments. J Mater Eng Perform 2004; 13: 406–412.

12.

Fallah

Corbin

Khajepour

. Process optimization of Ti-Nb alloy coatings on a Ti-6al-4V plate using a fiber laser and blended elemental powders. J Mater Process Technol 2010; 210: 2081–2087.

13.

Popoola

API

Phume

Pityana

et al.

In-situ formation of laser Ti6Al4V-TiB composite coatings on Ti6Al4V alloy for biomedical application. Surf Coat Technol 2016; 285: 161–170.

14.

Filip

. Alloying of surface layer of the Ti6Al4V titanium alloy through the laser treatment. J Achiev Mater Manuf Eng 2006; 15: 174–180.

15.

Balla

Soderlind

Bose

et al.

Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy. J Mech Behav Biomed Mater 2014; 32: 335–344.

16.

Das

Bhattacharya

Dittrick

et al.

In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: microstructure, tribological and in-vitro biocompatibility. J Mech Behav Biomed Mater 2014; 29: 259–271.

17.

Sahasrabudhe

Soderlind

Bandyopadhyay

. Laser processing of in situ TiN/Ti composite coating on titanium. J Mech Behav Biomed Mater 2016; 53: 239–249.

18.

Matsuno

Yokoyama

Watari

et al.

Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium. Biomaterials 2001; 22: 1253–1262.

19.

Krishna

Bose

Bandyopadhyay

. Low stiffness porous Ti structures for load-bearing implants. Acta Biomater 2007; 3: 997–1006.

20.

Metikos-Hukovic

Kwokal

Piljac

. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. Biomaterials 2004; 24: 3765–3775.