S–N curves for fatigue life estimation of friction stir welded 19501 aluminum alloy T-joint

Abstract

In this study, the mechanical properties and fatigue life of 19501 aluminum alloy friction stir welded T-joint is investigated. Tensile properties of friction stir welded joint show that there is a marginal reduction of about 5% in strength and ductility as compared to unwelded 19501 aluminum alloy. Fatigue test results of T-joint specimen at two stress ratios of 0 and -1 show that there is a reduction of 15% in fatigue strength due to change of stress ratio from -1 to 0. Also, higher variation is seen in fatigue strength in low cycle zone than the high cycle zone. Effect of mean stress on fatigue life is discussed on the basis of different mean stress effect models. Morrow’s mean stress effect model is found to be better than other models. Micrographs from the fracture surfaces of retreating side, mid weld zone, and advancing side of the T-joint indicates that fracture surfaces are cleavage fracture. Different sizes of inter-metallic bonding are seen in the micrographs, which indicate that fracture is initiated due to breaking of the brittle inter-metallic bonding.

Keywords

T-joint friction stir welding S–N curve mean stress effect stress concentration

Get full access to this article

View all access options for this article.

References

Moreira

PMGP

de Figueiredo

MAV

de Castro

PMST

. Fatigue behaviour of FSW and MIG weldments for two aluminium alloys. Theoret Appl Fract Mech 2007; 48: 169–177.

Vinod

Misal

. Fatigue life estimation of a butt welded joint by S-N approach. Int J Appl Res Mech Eng 2012; 2: 2231–2250.

Guy

Michel

. S-N curves for welded, non-welded or improved welded details of marine structures. Procedia Eng 2013; 66: 49–61.

Ericsson

Sandstrom

. Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG. Int J Fatigue 2003; 25: 1379–1387.

Booth D and Sinclair I. Fatigue of friction stir welded 2024-T351 aluminium alloy. In: 8th international conference (ICAA8), Switzerland, Materials Science Forum, 2002, pp.1671–1676.

Zhang

et al.

Fatigue performance of friction stir welded butt joints for 2524-T3 aluminum alloy. Mater Mech Eng 2012; 5: 47–49.

Zhao

Zhou

Wang

et al.

Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding. Mater Des 2014; 57: 146–155.

Sidhom N, Laamour A, Fathallah R, et al. Fatigue strength improvement of 5083 H11 Al-alloy T-welded joints by shot peening: Experimental characterization and predictive approach. Int J Fatigue 2005; 27: 729–745.

Nieslony

Böhm

. Mean stress effect correction using constant stress ratio S-N curves. Int J Fatigue 2013; 52: 49–56.

10.

Bandara

Siriwardane

Dissanayake

et al.

Full range S-N curves for fatigue life evaluation of steels using hardness measurements. Int J Fatigue 2015; 96: 96–101.

11.

Stephens

Fatemi

Stephens

et al.

Metal fatigue in engineering, New York: Wiley Interscience Press, 2001, pp. 84–84.

12.

Suresh

. Fatigue of materials, Cambridge: Cambridge University Press, 1991.

13.

ASTM

E8 – 99

. Standard test methods for tension testing of metallic materials, West Conshohocken, PA: ASTM International, 1999.

14.

Radaj

. Design and analysis of fatigue resistant welded structures, Cambridge: Abington Publishing, 1990.

15.

Sonsino CM. A consideration of allowable equivalent stresses for fatigue design of welded joints according to the notch stress concept with reference radii r_ref = 1.00 and 0.05 mm. Weld World 2009; 53: R64–R75.

16.

Fricke

. IIW recommendations for the fatigue assessment of welded structures by notch stress analysis, Cambridge: Woodhead Publishing, 2012.

17.

Hobbacher

. Recommendations for fatigue design of welded joints and components, WRC Bulletin 520. New York, NY: Welding Research Council, 2009.

18.

Rechard

Nisbett

. Shigley’s mechanical engineering design, India: Tata McGraw Hill, 2011.

19.

Goodman

. Mechanics applied to engineering, Harlow, UK: Longmans, Green & Co, 1899.

20.

Gerber

. Bestimmung der zulässigen Spannungen in Eisen-Konstruktionen (Calculation of the allowable stresses in iron structures). Z Bayer Archit Ing-Ver 1874; 6: 101–110.

21.

Morrow J. Fatigue properties in metals. In: Graham JA (ed.) Fatigue design handbook. Warrendale, PA: SAE International, 1968, pp.21–29.

22.

Kwofie

. An exponential stress function for predicting fatigue strength and life due to mean stresses. Int J Fatigue 2001; 23: 829–836.

23.

Karolina

Tadeusz

. Lifetime of semi-ductile materials through the critical plane approach. Int J Fatigue 2014; 67: 73–77.