Investigating the vibrational behaviour of a rotating two-blade propeller by using a self-tracking method

Abstract

This study investigated the vibrational behaviour of a rotating two-blade propeller at different rotational speeds by using self-tracking laser Doppler vibrometry. Given that a self-tracking method necessitates the accurate adjustment of test setups to reduce measurement errors, a test table with sufficient rigidity was designed and built to enable the adjustment and repair of test components. The results of the self-tracking test on the rotating propeller indicated an increase in natural frequency and a decrease in the amplitude of normalized mode shapes as rotational speed increases. To assess the test results, a numerical model created in ABAQUS was used. The model parameters were tuned in such a way that the natural frequency and associated mode shapes were in good agreement with those derived using a hammer test on a stationary propeller. The mode shapes obtained from the hammer test and the numerical (ABAQUS) modelling were compared using the modal assurance criterion. The examination indicated a strong resemblance between the hammer test results and the numerical findings. Hence, the model can be employed to determine the other mechanical properties of two-blade propellers in test scenarios.

Keywords

Self-tracking laser Doppler vibrometry two-blade propeller natural frequency mode shape

Get full access to this article

View all access options for this article.

References

Duan F, Ouyang T and Li M. Research on detecting technology of rotating blade vibration performance parameters. In: Measuring technology and mechatronics automation, 2009. ICMTMA’09. International Conference on. 2009, IEEE.

Holzinger

Jüngst

Schiffer

et al.

Self-excited blade vibration experimentally investigated in transonic compressors: rotating instabilities and flutter. J Turbomach 2016, pp. 138–041006.

García

Beloki

Zubia

et al.

An optical fiber bundle sensor for tip clearance and tip timing measurements in a turbine rig. Sensors 2013; 13(6): 7385–7398.

Kadambi

Quinn

Adams

. Turbomachinery Blade Vibration and Dynamic Stress Measurements Utilizing Nonintrusiwe Techniques. Transac ASME 1989; 111: 468–474.

Roth

. Vibration measurements on turbomachine rotor blades with optical probes. In: Measurement methods in rotating components of turbomachinery 1980.

Nava

Paone

Rossi

et al.

Design and experimental characterization of a nonintrusive measurement system of rotating blade vibration. J Eng Gas Turbines Pow 1994; 116: 658–662.

Beeck

. Pulsed holographic vibration analysis on high-speed rotating objects: fringe formation, recording techniques, and practical applications. Opt Eng 1992; 31: 553–561.

Kulczyk W and Davis Q. Laser Doppler instrument for measurement of vibration of moving turbine blades. In: Proceedings of IEEE, 1973.

Bucher I, Schmiechen P, Robb DA, et al.. Laser-based measurement system for measuring the vibration on rotating discs. In: Proceedings-spie the international society for optical engineering. 1994. Spie international society for optical engineering.

10.

Rothberg S and N Halliwell. Application of laser vibrometry to vibration measurements on rotating components. In: Design engineering technical conferences, 1995.

11.

Castellini P and Santolini C. Vibration measurements on blades of naval propeller rotating in water. In: Proceedings-spie the international society for optical engineering, 1996.

12.

Rothberg S, Allen MS, Castellini P, et al. An international review of laser Doppler vibrometry: making light work of vibration measurement. 2017.

13.

Martarelli

Castellini

Santolini

et al.

Laser Doppler vibrometry on rotating structures in coast-down: resonance frequencies and operational deflection shape characterization. Meas Sci Tech 2011, pp. 22–115106.

14.

Martarelli

Castellini

. Performance analysis of continuous tracking laser Doppler vibrometry applied to rotating structures in coast-down. Meas Sci Tech 2012, pp. 23–065202.

15.

Lomenzo RA Jr. Static misalignment effects is a self-tracking laser vibrometry system for rotating bladed disks. PhD Thesis, Virginia Polytechnic Institute and State University, 1998.

16.

Zima AD Jr. Misalignment effects of the self-tracking laser Doppler vibrometer. PhD Thesis, Virginia Tech, 2001.

17.

Sever I, Stanbridge A and Ewins D. Turbomachinery blade vibration measurements with tracking LDV under rotation. In Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2006.

18.

Dinardo G, Fabbiano L and Vacca G. Influences of geometric configuration on the analysis of uncertainties affecting a novel configuration of self-tracking LDV. In: Proc of 12th IMEKO TC10, June, 2013, pp.6–7.

19.

Dinardo

Fabbiano

Vacca

. How geometric misalignments can affect the accuracy of measurements by a novel configuration of self-tracking LDV . Acta Imeko 2014; 3: 26–31.

20.

Ewins DJ. Modal testing: theory and practice. Vol. 15, Letchworth: Research studies press, 1984.

21.

Lomenzo R, Barker A and Wicks A. Laser vibrometry system for rotating bladed disks. In: SPIE proceedings series, Society of Photo-Optical Instrumentation Engineers, 1999.