Investigation on surface morphology and tribological property generated by vibration assisted strengthening on aviation spherical plain bearings

Abstract

The extreme and complex working conditions require aviation spherical plain bearings not only to have high machining accuracy and low surface roughness, but also to possess high surface microhardness and lubricant retaining capability. This paper presents a vibration assisted strengthening approach to achieving the synergistic effects of the surface property-improving and appearance-improving. The research attempts to answer how vibration assisted strengthening technique can improve the surface tribological properties of aviation spherical plain bearing components particularly in light of proposing the flat-headed asperity distribution model and the corresponding elastic–plastic contact modelling for the special processed surface morphology. Subsequently, the models are corroborated by the experimental results of characterizing the surface morphology produced by vibration assisted strengthening with different parameters such as rolling times and rolling static force. The surface tribological properties of spherical plain bearing specimens were studied by employing the UMT-TriboLab platform. The theoretical analysis and experimental results indicate that the surface asperities of spherical plain bearing components processed with repeated high frequency strikes present a flat-headed distribution but not Gauss distribution. It characterizes with a marked majority of produced small asperities with similar height, which is beneficial to frictional couple contacts and a lot of original valleys retaining lubricants. The processing technique contributes to increasing the surface microhardness by 20% and decreasing the surface roughness from about Ra 0.4 µm to below Ra 0.1 µm. The ball-on-flat friction tests demonstrate that both the special flat-headed surface structure and the elevated microhardness can attribute the improvement of tribological properties and wear resistance performance of spherical plain bearings.

Keywords

Spherical plain bearing surface tribological property surface morphology vibration assisted strengthening surface characterization

Get full access to this article

View all access options for this article.

References

Guo

Song

Qiao

et al.

The friction and wear properties of the spherical plain bearings with self-lubricating composite liner in oscillatory movement. J Wuhan Univ Technol – Mater Sci Ed 2004; 19: 886–916.

Qiu

Miao

. Influence of ultrasonic modified liners on the adhesive and tribological performances of self-lubricating radial spherical plain bearings. Tribol Trans 2016; 59: 655–662.

Wang

Fang

Zhang

. Lifetime prediction of self-lubricating spherical plain bearings based on physics-of-failure model and accelerated degradation test. Sci Technol 2016; 18: 528–538.

Madge

Caron

Gralla

. Novel W-based metallic glass with high hardness and wear resistance. Intermetallics 2014; 47: 6–10.

Cavaliere

Zavarise

Perillo

. Modeling of the carburizing and nitriding processes. Comput Mater Sci 2009; 46: 26–35.

Tsujikawa

Yoshida

Yamauchi

. Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding. Surf Coat Technol 2005; 200: 507–511.

Gill

Telang

Mannava

. Comparison of mechanisms of advanced mechanical surface treatments in nickel-based superalloy. Mater Sci Eng A 2013; 576: 346–355.

Gao

. High temperature oxidation resistant coatings produced by electro-spark deposition. Mater Sci Forum 2001; 369–372: 579–586.

Yuan

Qiu

. Nanostructured Co–Cr–Fe alloy surface layer fabricated by combination of laser clad and friction stir processing. Surf Coat Technol 2014; 258: 415–425.

10.

Tillmann

Hagena

Stangier

. Wear behavior of bio-inspired and technologically structured HVOF sprayed NiCrBSiFe coatings. Surf Coat Technol 2015; 280: 16–26.

11.

Chang

Abhishek

Amrinder

et al.

Gradient nanostructure and residual stresses induced by ultrasonic nano-crystal surface modification in 304 austenitic stainless steel for high strength and high ductility. Mater Sci Eng A 2014; 613: 274–288.

12.

Wang

Liu

et al.

Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing. Appl Surf Sci 2008; 255: 1824–1829.

13.

Liu

Zhao

Wang

. Determination of the plastic properties of materials treated by ultrasonic surface rolling process through instrumented indentation. Mater Sci Eng A 2014; 500: 21–31.

14.

Xie

Williams

. The prediction of friction and wear when a soft surface slides against a harder rough surface. Wear 1996; 196: 21–34.

15.

Greenwood

Williamson

JBP

. Contact of nominally flat surfaces. Proc R Soc Lond A Math Phys Sci 1966; 295: 300–319.

16.

Fischer-Cripps

. The Hertzian contact surface. J Mater Sci 1999; 34: 129–137.

17.

Chang

Etsion

Bogy

. An elastic–plastic model for the contact of rough surface. ASME J Tribol 1987; 109: 257–263.

18.

Shi

Polycarpou

. Measurement and modeling of normal contact stiffness and contact damping at the meso scale. J Vib Acoust 2005; 127: 52–60.

19.

Liu

Yin

Tao

et al.

A glimpse of superb tribological designs in nature. Biotribology 2015; 1–2: 11–23.

20.

Leonard

Thomas

Colin

et al.

A theory of pad conditioning for chemical-mechanical polishing. J Eng Math 2004; 50: 1–24.

21.

Zhu

Zhang

et al.

Influence of particles on the loading capacity and the temperature rise of water film in ultra-high speed hybrid bearing. Chin J Mech Eng 2015; 28: 541–548.

22.

Persson

BNJ

. Contact mechanics for randomly roughness. Surf Sci Rep 2006; 61: 201–207.

23.

Cheng

. Machining dynamics: Theory, applications and practices, London: Springer, 2008.