Experimental and numerical analysis of the unsteady influence of the inlet guide vanes on cavitation performance of an axial pump

Abstract

The effect of the inlet guide vanes on cavitation performance of an axial pump is investigated to assess the mechanism for cavitation in pumps and improve their cavitation performance. The effect of inlet guide vane angles on cavitation performance was assessed experimentally, and computational fluid dynamics was used to analyze the inner flow field of the axial pump and to probe the cavitation mechanism. The simulation results agree qualitatively with the experimental data, showing that cavitation performance is improved with positive inlet guide vane angles but hampered with negative ones. The cavitation performance itself is controlled by the cavitation volume, which first expands circumferentially when the net positive suction head decreases from a certain large value and then develops toward the axis radially after the net positive suction head reaches a certain value. This is when the cavitation performance deteriorates. Comparing cavitation volume for the critical net positive suction head as determined by two different methods, the method based on efficiency drop (NPSH_eff.,1%) is found to be more suitable than that based on head drop (NPSH_head.,3%). Furthermore, the distribution of swirl is shown to be closely related to the distribution of cavitation, a feature that may be used to predict cavitation along the impeller.

Keywords

Inlet guide vanes (IGVs)cavitation computational fluid dynamics axial pump swirl

Get full access to this article

View all access options for this article.

References

Knapp

Daily

Hammitt

. Cavitation, New York: McGraw-Hill Book Company, 1979.

Hosono K, Kajie Y, Saito S, et al. Study on cavitation influence for pump head in an axial flow pump. In: 9th International Symposium on Cavitation, Journal of Physics: Conference Series 2015; 656: 012062.

Zhang

Shi

et al.

Numerical analysis of unsteady tip leakage vortex cavitation cloud and unstable suction-side-perpendicular cavitating vortices in an axial flow pump. Int J Multiph Flow 2015; 77: 244–256.

Pouffary

Patella

Reboud

et al.

Numerical simulation of 3D cavitating flows: analysis of cavitation head drop in turbomachinery. ASME J Fluids Eng 2008; 130: 061301.

Schiavello B and Visser FC. Pump cavitation various NPSH_r criteria, NPSH_a margins, and impeller life expectancy. In: Proceeding of the twenty-fifth international pump users symposium, 2009, paper no. 113–144.

Hosien

Selim

. Experimental study of cavitation criterion in centrifugal pumps. J Vis 2013; 16: 99–110.

Avellan F. Introduction to cavitation in hydraulic machinery. In: The sixth international conference on hydraulic machinery and hydrodynamics, Timisoara, Romania, 2004.

Zhang

Chen

. Numerical analysis of cavitation within slanted axial-flow pump. J Hydrodyn Ser B 2013; 25: 663–672.

Christopher

Kumaraswamy

. Identification of critical net positive suction head from noise and vibration in a radial flow pump for different leading edge profiles of the vane. ASME J Fluids Eng 2013; 135: 121301.

10.

Feng

Cheng

Guo

et al.

Simulation of cavitation performance of an axial flow pump with inlet guide vanes. Adv Mech Eng 2016; 8: 1–8.

11.

Coppinger

Swain

. Performance prediction of an industrial centrifugal compressor inlet guide vane system. Proc IMechE, Part A: J Power and Energy 2000; 21: 153–164.

12.

Zhou

Cai

. Experimental study on the influence of diffuser and inlet guide vane for the performance of centrifugal compressor. Exp Tech 2008; 32: 26–33.

13.

Wang

Tan

Zhu

et al.

Numerical investigation of influence of inlet guide vanes on unsteady flow in a centrifugal pump. In: Proc IMechE, Part C: J Mechanical Engineering Science 2015; 229: 3405–3416.

14.

Venkatrayulu

Prithvi

Narayanamurthi

. Influence of freely rotating inlet guide vanes on the return flows and stable operating range of an axial flow fan. J Eng Power 1980; 102: 75–80.

15.

Soranna

Chow

Uzol

et al.

The effects of inlet guide vane-wake impingement on the boundary layer and the near-wake of a rotor blade. J Turbomach 2010; 132: 1–13.

16.

Ahmed

Muiz

Mubashir

et al.

Efficiency enhancement of centrifugal water pump by using inlet guided vanes. Eur J Adv Eng Technol 2016; 3: 1–4.

17.

Fukutomi

Nakamura

. Performance and internal flow of cross-flow fan with inlet guide vane. JSME Int J Ser B Fluids Therm Eng 2006; 48: 763–769.

18.

Zhou

Fan

Wei

et al.

Experimental and numerical analysis of the unsteady influence of an inlet guide vane. Proc IMechE, Part C: J Mechanical Engineering Science 2012; 226: 660–680.

19.

Tan

Cao

et al.

Numerical investigation of clocking effect on a centrifugal pump with inlet guide vanes. Eng Comput 2016; 33: 465–481.

20.

Liu

Tan

Liu

et al.

Influence of prewhirl angle and axial distance on energy performance and pressure fluctuation for a centrifugal pump with inlet guide vanes. Energies 2017; 10: 695.

21.

Liu

Tan

Cao

. Influence of geometry of inlet guide vanes on pressure fluctuations of a centrifugal pump. ASME J Fluids Eng 2018; 140: 091204.

22.

Menter

. Review of the shear-stress transport turbulence model experience from an industrial perspective. Int J Comput Fluid Dyn 2009; 23: 305–316.

23.

Bardina JE, Huang PG and Coakley TJ. Turbulence modeling validation, testing, and development. NASA Technical Report Memorandum No.110446. 1997.

24.

Long

et al.

Verification and validation of URANS simulations of the turbulent cavitating flow around the hydrofoil. J Hydrodyn 2017; 29: 610–620.

25.

Fukaya M, Okamura T, Tamura Y, et al. Prediction of cavitation performance of axial flow pump by using numerical cavitating flow simulation with bubble flow model. In: Fifth international symposium on cavitation. Cav03-OS-6-012. 2003.