The role of dynamic response parameters in damage prediction

Abstract

This article presents a literature review of published methods for damage identification and prediction in mechanical structures. It discusses ways which can identify and predict structural damage from dynamic response parameters such as natural frequencies, mode shapes, and vibration amplitudes. There are many structural applications in which dynamic loads are coupled with thermal loads. Hence, a review on those methods, which have discussed structural damage under coupled loads, is also presented. Structural health monitoring with other techniques such as elastic wave propagation, wavelet transform, modal parameter, and artificial intelligence are also discussed. The published research is critically analyzed and the role of dynamic response parameters in structural health monitoring is discussed. The conclusion highlights the research gaps and future research direction.

Keywords

Damage quantification dynamic response thermomechanical loads fatigue crack propagation structural health monitoring

Get full access to this article

View all access options for this article.

References

Doebling SW, Farrar CR, Prime MB, et al. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review. Los Alamos National Laboratory Report, 1996.

Doebling

Farrar

Prime

. A summary review of vibration-based damage identification methods. Shock Vib 1996; 30: 91–105.

Fan

Qiao

. Vibration-based damage identification methods: a review and comparative study. Struct Health Monitor 2011; 10: 83–111.

Das

Saha

Patro

. Vibration-based damage detection techniques used for health monitoring of structures: a review. J Civil Struct Health Monitor 2016; 6: 477–507.

Salawu

. Detection of structural damage through changes in frequency: a review. Eng Struct 1997; 19: 718–723.

Nandwana BP and Maiti SK. Vibration based detection of location and size of edge crack in beam on multiple support. In: Proceedings of the 9th international conference on fracture, Sydney, Australia, 1 April–5 April 1997, pp.2603–2610.

Nandwana

Maiti

. Modeling of vibration of beam in presence of inclined edge or internal crack for its possible detection based on frequency measurement. Eng Fract Mech 1997; 58: 193–205.

Khorshidi

Soltani

. Diagnosis of type, location and size of cracks by using generalized differential quadrature and Rayleigh quotient methods. J Theoret Appl Mech 2013; 43: 61–70.

Loya

Rubio

Fernandez-Saez

. Natural frequencies for bending vibrations of Timoshenko cracked beams. Continuum Mech Struct Anal 2006; 290: 1–14.

10.

Ostachowicz

Krawczuk

. Analysis of the effect of cracks on the natural frequencies of a cantilever beam. J Sound Vib 1991; 150: 191–201.

11.

Batihan AC. Vibration analysis of cracked beams on elastic foundation using Timoshenko beam theory. MS Thesis, Middle East Technical University, Turkey, 2011.

12.

Yadav

Roy

Mahto

et al.

Experimental investigation of crack in brass cantilever beam using natural frequency as basic criteria. Int J Scient Eng Res 2014; 5: 447–454.

13.

Liang

. An integrated approach to detection of cracks using vibration characteristics. J Franklin Inst 1993; 330: 841–853.

14.

Kulkarni

Rajmane

Sawant

. Crack detection in cantilever beam by frequency based method. Int J Adv Res Sci Eng Technol 2016; 3: 1174–1177.

15.

Priyadarshini A. Identification of cracks in beams using vibrational analysis. MS Thesis, National Institute of Technology, Rourkela, India, 2013.

16.

Barad

Sharma

Vyas

. Crack detection in cantilever beam by frequency based method. Procedia Eng 2013; 51: 770–775.

17.

Chang

Petroski

. On detecting a crack by tapping a beam. Int J Press Vess Piping 1986; 22: 41–55.

18.

Chinchalkar

. Determination of crack location in beams using natural frequencies. J Sound Vib 2001; 247: 417–429.

19.

Lele

Maiti

. Modeling of transverse vibration of short beams for crack detection and measurement of crack extension. J Sound Vib 2002; 257: 559–583.

20.

Liang

Choy

. Detection of cracks in beam structures using measurements of natural frequencies. J Franklin Inst 1991; 328: 505–518.

21.

Narkis

. Identification of crack location in vibrating simply supported beam. J Sound Vib 1994; 172: 549–558.

22.

Patil

Maiti

. Detection of multiple cracks using frequency measurements. Eng Fract Mech 2003; 70: 1553–1572.

23.

Patil

Maiti

. Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements. J Sound Vib 2005; 281: 439–451.

24.

Shifrin

Ruotolo

. Natural frequencies of a beam with an arbitrary number of cracks. J Sound Vib 1999; 222: 409–423.

25.

Schlums

Dual

. High resolution crack growth measurements in vibrating beams. Fatigue Fract Eng Mater Struct 1997; 20: 1051–1058.

26.

Jagdale

Chakrabarti

. Free vibration analysis of cracked beam. Int J Eng Res Appl 2013; 3: 1172–1176.

27.

Bhinge

Karajagi

Kulkarni

. Crack detection in cantilever beam by vibration techniques. Int J Eng Res Appl 2014; 3: 80–86.

28.

Yamuna

Sambasivarao

. Vibration analysis of beam with varying crack location. Int J Eng Res Gen Sci 2014; 2: 1008–1017.

29.

Gounaris

Dimarogonas

. A finite element of a cracked prismatic beam for structural analysis. Comput Struct 1988; 28: 309–313.

30.

Orhan

. Analysis of free and forced vibration of a cracked cantilever beam. Non-Destruct Test Eval Int 2007; 40: 443–450.

31.

Thatoi

Nanda

Das

et al.

Analysis of the dynamic response of a cracked beam structure. Appl Mech Mater 2012; 187: 58–62.

32.

Ratnam

Rao

Murthy

BSN

et al.

Dynamic response of a multiple cracked cantilever beam. Int J Res Eng Technol 2015; 4: 195–198.

33.

Zhu

Emory

. Experimental and numerical investigation of structural damage detection using changes in natural frequencies. J Vib Acoust 2007; 129: 686–690.

34.

Adams

Cawley

Pye

et al.

A vibration technique for non-destructively assessing the integrity of structures. J Mech Eng Sci 1978; 20: 93–100.

35.

Tsai

Wang

. (1996) Vibration analysis and diagnosis of a cracked shaft. J Sound Vib 1996; 192: 607–620.

36.

Smith SW and McGowan PE. Locating damaged members in a truss structure using modal test data: a demonstration experiment. In: 30th AIAA structures, structural dynamics and materials conference, NASA Langley Research Center, Hampton, VA, USA, 1989.

37.

Cawley

Adams

. The location of defects in structures from measurements of natural frequencies. J Strain Anal 1979; 14: 49–57.

38.

Cawley

Ray

. A comparison of the natural frequency changes produced by cracks and slots. J Vib Acoust Stress Reliab Des 1988; 110: 366–370.

39.

Ruotolo

Surace

. Damage assessment of multiple cracked beams: numerical results and experimental validation. J Sound Vib 1997; 206: 567–588.

40.

Sekhar

. Vibration characteristics of a cracked rotor with two open cracks. J Sound Vib 1999; 223: 497–512.

41.

Salawu

. Detection of structural damage through changes in frequency. Eng Struct 1997; 19: 718–723.

42.

Chondros

Dimarogonas

Yao

. A continuous cracked beam vibration theory. J Sound Vib 1998; 215: 17–34.

43.

Christides

Barr

ADS

. One-dimensional theory of cracked Bernoulli-Euler beams. Int J Mech Sci 1984; 26: 639–648.

44.

Dentsoras

Dimarogonas

. Resonance controlled fatigue crack propagation in a beam under longitudinal vibrations. Int J Fract 1983; 23: 15–22.

45.

Gudmundson

. Eigen frequency changes of structures due to cracks, notches or other geometrical changes. J Mech Phys Solids 1982; 30: 339–353.

46.

Gudmundson

. The dynamic behavior of slender structures with cross-sectional cracks. J Mech Phys Solids 1983; 31: 329–345.

47.

Kam

Lee

. Detection of cracks in structures using modal test data. Eng Fract Mech 1992; 42: 381–387.

48.

Khiem

Lien

. A simplified method for natural frequency analysis of a multiple cracked beam. J Sound Vib 2001; 245: 737–751.

49.

Krawczuk

Ostachowicz

. Transverse natural vibrations of a cracked beam loaded with a constant axial force. J Vib Acoust 1993; 115: 524–528.

50.

Liang

Cho

. Quantitative NDE technique for assessing damages in beam structures. J Eng Mech 1992; 118: 1468–1487.

51.

. Vibratory characteristics of multi-step beams with an arbitrary number of cracks and concentrated masses. Appl Acoust 2001; 62: 691–706.

52.

Naik SS and Maiti SK. Special issues related to detection of circumferential crack at different orientations in pipes by vibration method. In: 14th international congress on sound and vibration, Cairns, Australia, 2007.

53.

Petrone

Carzana

Ricci

et al.

Damage detection through structural intensity and vibration based technique. Adv Aircraft Spacecraft Sci 2017; 4: 613–637.

54.

Revi

Indu

. Crack detection of propped cantilever beam using dynamic analysis. Int J Techn Res Appl 2015; 3: 274–278.

55.

Salawu S and Williams C. Damage location using vibration mode shapes. In: Proceedings of the 12th international modal analysis conference, Bethel, CN, USA, 1994, pp.933–939.

56.

Batabyal AK. Crack detection in cantilever beam using vibration response. In: 8th international conference on vibration problems, Kolkata, India, 30 January–3 February 2007, pp.27–32.

57.

Rizos

Aspragathos

. Identification of crack location and magnitude in a cantilever beam from the vibration modes. J Sound Vib 1990; 138: 381–338.

58.

Agarwalla

Parhi

. Effect of crack on modal parameters of a cantilever beam subjected to vibration. Procedia Eng 2013; 51: 665–669.

59.

Shinde

Katekar

. Vibration analysis of cantilever beam with single crack using experimental method. Int J Eng Res Technol 2014; 3: 1644–1648.

60.

Chati

Rand

Mukherjee

. Modal analysis of a cracked beam. J Sound Vib 1997; 207: 249–270.

61.

Pandey

Biswas

Samman

. Damage detection from changes in curvature mode shapes. J Sound Vib 1991; 145: 321–332.

62.

Simoen

Roeck

Lombaert

. Dealing with uncertainty in model updating for damage assessment: a review. J Mech Syst Signal Process 2015; 56–57: 123–149.

63.

Haisty

Springer

. A general beam element for use in damage assessment of complex structures. J Vib Acoust Stress Reliab Des 1988; 110: 389–394.

64.

Bouboulas AS, Georgantzinos SK and Anifantis NK. Vibration analysis of cracked beams using the finite element method. In: Advances in vibration engineering and structural dynamics, Chapter 8, 2012, pp.181–204. IntechOpen.

65.

Bisi PS. Vibration and buckling analysis of cracked composite beam. MS Thesis, National Institute of Technology, Rourkela, India, 2011.

66.

Mohammed OD. Dynamic modelling and vibration analysis for gear tooth crack detection. PhD Thesis, Lulea University of Technology, Sweden, 2015.

67.

Gounaris

Papadopoulos

Dimarogonas

. Crack identification in beams by coupled response measurements. Comput Struct 1996; 58: 299–305.

68.

Nikolakopoulos

Katsareas

Papadopoulos

. Crack identification in frame structures. Comput Struct 1997; 64: 389–406.

69.

Chen

. Vibration and stability of cracked thick rotating blades. Comput Struct 1988; 28: 67–74.

70.

Dirr

Schmalhorst

. Crack depth analysis of a rotating shaft by vibration measurement. J Vib Acoust Stress Reliab Des 1988; 110: 158–164.

71.

Shen

MHH

Pierre

. Natural modes of Bernoulli-Euler beams with symmetric cracks. J Sound Vib 1990; 138: 115–134.

72.

Xiaoqing

Qiang

Feng

. Analytical approach for detection of multiple cracks in a beam. J Eng Mech 2010; 136: 345–357.

73.

Heydari

Ebrahimi

Behzad

. Forced vibration analysis of a Timoshenko cracked beam using a continuous model for the crack. Eng Sci Technol 2014; 17: 194–204.

74.

Swamidas

ASJ

Yang

Seshadri

. Identification of cracking in beam structures using Timoshenko and Euler formulations. J Eng Mech 2004; 130: 1297–1308.

75.

Qian

Jiang

. The dynamic behavior and crack detection of a beam with a crack. J Sound Vib 1990; 138: 233–243.

76.

Papadopoulos

Dimarogonas

. Coupled longitudinal and bending vibrations of a rotating shaft with an open crack. J Sound Vib 1987; 117: 81–93.

77.

Papadopoulos

Dimarogonas

. Coupled vibration of cracked shafts. J Vib Acoust 1992; 114: 461–467.

78.

Papadopoulos

Dimarogonas

. Stability of cracked rotors in the coupled vibration mode. J Vib Acoust Stress Reliab Des 1988; 110: 356–359.

79.

Yuen

MMF

. A numerical study of the Eigen parameters of a damaged cantilever. J Sound Vib 1985; 103: 301–310.

80.

Boltezar

Strancar

Kuhelj

. Identification of transverse crack location in flexural vibrations of free–free beams. J Sound Vib 1998; 211: 729–734.

81.

Jena PK, Thatoi DN, Nanda J, et al. Effect of damage parameters on vibration signatures of a cantilever beam. In: International conference on modelling, optimization and computing, 10 April–11 April 2012, Tamil Nadu, India, 2012, pp.3318–3330.

82.

Gasch

. A survey of dynamic behaviour of a simple rotating shaft with transverse crack. J Sound Vib 1993; 160: 313–321.

83.

Mayes

Davies

WGR

. Analysis of the response of a multi-rotor-bearing system containing a transverse crack in a rotor. J Vib Acoust Stress Reliab Des 1984; 106: 139–145.

84.

Aghdam

Hassanifard

Ettefagh MM et al.

Investigating fatigue life effects on the vibration properties in friction stir spot welding using experimental and finite element modal analysis. J Mech Eng 2014; 60: 735–741.

85.

Shang

Barkey

. Analysis of fatigue crack behaviour based on dynamic response simulations and experiments for tensile-shear spot-welded joints. Fatigue Fract Eng Mater 2005; 29: 23–30.

86.

Wang

Barkey

. Fatigue crack identification in tensile-shear spot welded joints by dynamic response characteristics. J Eng Mater Technol 2005; 127: 310–317.

87.

Wang

Barkey

. Fatigue cracking and its influence on dynamic response characteristics of spot welded specimens. Soc Exp Mech 2004; 44: 512–521.

88.

Wang

Barkey

. Investigating the spot weld fatigue crack growth process using x-ray imaging. Weld Res 2006; 85: 84–90.

89.

Liu

. New method for concurrent dynamic analysis and fatigue damage prognosis of bridges. J Bridge Eng 2012; 17: 396–408.

90.

Oskouei

Dumanoglu

. Influence of crack on the dynamic response of concrete gravity dam. Teknik Dergi 1997; 8: 1457–1470.

91.

Nwosu DI, Swamidas AS, Guigne JY, et al. Studies on influence of cracks on the dynamic response of tubular t-joints for nondestructive evaluation. In: Proceedings of SPIE, 1995, pp.1122–1129.

92.

Rao

Eischen

. Failure analysis of mixed mode crack growth in heavy duty truck frame rail. Case Stud Eng Fail Anal 2016; 5–6: 67–74.

93.

Dompierre B, Wyart E, Mesbah M, et al. Fatigue crack growth analysis on a rotor blade under forced response. In: Proceedings of ASME turbo expo, San Antonio, TX, USA, 2013, pp.1–9.

94.

Muhlstein

Howe

Ritchie

. Fatigue of polycrystalline silicon for microelectromechanical system applications: crack growth and stability under resonant loading conditions. Mech Mater 2004; 36: 13–33.

95.

Rahmatalla S and Schallhorn C. Diagnosis of retrofit fatigue crack re-initiation and growth in steel-girder bridges for proactive repair and emergency planning. A Cooperative Research Project, US Department of Transportation, 2014.

96.

Sadek

Bergstrom

Hallback

et al.

Computation of and testing crack growth at 20 kHz load frequency. Procedia Struct Integr 2016; 2: 1164–1172.

97.

Wang J, Seah SKW, Wong EH, et al. Fracture mechanics study of fatigue crack growth in solder joints under drop impact. In: 58th electronic components and technology conference, Florida, USA, 2008, pp.1601–1605.

98.

Sarrafi

Mao

Niezrecki

et al.

Vibration-based damage detection in wind turbine blades using phase- based motion estimation and motion magnification. J Sound Vib 2018; 421: 300–318.

99.

Tcherniak

. Rotor anisotropy as a blade damage indicator for wind turbine structural health monitoring systems. Mech Syst Signal Process 2016; 74: 183–198.

100.

Sinou

Faverjon

. The vibration signature of chordal cracks in a rotor system including uncertainties. J Sound Vib 2012; 331: 138–154.

101.

Hoell S and Piotr O. Structural damage detection in wind turbine blades based on time series representations of dynamic responses. In: Conference on smart materials and nondestructive evaluation for energy systems, Canada, 2015.

102.

Jiang

Karimirad

Moan

. Dynamic response analysis of wind turbines under blade pitch system fault, grid loss, and shutdown events. Wind Energy 2014; 17: 1385–1409.

103.

Karimirad

Michailides

. Fault condition effects on the dynamic response of V-shaped offshore wind turbine. J Marine Sci Technol 2018, pp. 1–12.

104.

Rahman

Ismail

Noroozi

et al.

Study of open crack in rotor shaft using changes in frequency response function phase. Int J Damage Mech 2012; 22: 791–807.

105.

Adams

White

Rumsey

et al.

Structural health monitoring of wind turbines: method and application to a HAWT. Wind Energy 2011; 14: 603–623.

106.

Krawczuka

Palacza

Ostachowicz

. Wave propagation in plate structures for crack detection. Finite Elem Anal Des 2004; 40: 991–1004.

107.

Zak

Radzienski

Krawczuk

et al.

Damage detection strategies based on propagation of guided elastic waves. Smart Mater Struct 2012; 21: 18.

108.

Kudela

Zak

Krawczuka

et al.

Modelling of wave propagation in composite plates using the time domain spectral element method. J Sound Vib 2007; 302: 728–745.

109.

Kumar

Mahapatra

Gopalakrishnan

. A spectral finite element for wave propagation and structural diagnostic analysis of composite beam with transverse crack. Finite Elem Anal Des 2004; 40: 1729–1751.

110.

Lee

Staszewski

. Lamb wave propagation modelling for damage detection: I. Two-dimensional analysis. Smart Mater Struct 2007; 16: 249–259.

111.

Memmolo

Boffa

Maio

et al.

Damage localization in composite structures using a guided waves based multi-parameter approach. Aerospace 2018; 5: 111.

112.

Memmolo V, Park YJ, Lilov M, et al. Preliminary acousto-ultrasonic investigation for multi-parameter transducer self-diagnostic system in composites. Composite structures 2018; 202: 1229–1238.

113.

Memmolo

Maio

Boffa

et al.

Damage detection tomography based on guided waves in composite structures using a distributed sensor network. Optic Eng 2016, pp. 55 011007-1-011007-11.

114.

Memmolo

Cindolo

Ricci

et al.

A user interface damage detection technique based on a multiparameter. Methodology 2016; 167: 39–47.

115.

Memmolo

Boffa

Maio

et al.

Guided wave propagation and scattering for structural health monitoring of stiffened composites. Compos Struct 2018; 184: 568–580.

116.

Memmolo

Pasquino

Ricci

. Experimental characterization of a damage detection and localization system for composite structures. Measurement 2018; 129: 381–388.

117.

Ricci

Monaco

Maio

et al.

Guided waves in a stiffened composite laminate with a delamination. Struct Health Monitor 2016; 15(3): 351–358.

118.

Maio

Memmolo

Ricci

et al.

Ultrasonic wave propagation in composite laminates by numerical simulation. Compos Struct 2014; 121: 64–74.

119.

Monaco E, Memmolo V, Boffa ND, et al. Guided waves based SHM systems: parameters selection for better identification and localization of damages in composites stiffened plates. In: Health monitoring of structural and biological systems, 2017.

120.

Mal A, Ricci F, Samajder H, et al. NDE of composite structures using ultrasonic guided waves. In: Health monitoring of structural and biological systems, 2017.

121.

Banerjee S, Ricci F, Baid H, et al. Dynamic based damage detection in composite structures. In: Health monitoring of structural and biological system, 2017.

122.

Banerjee S, Ricci F and Mal A. A vibration and wave propagation based methodology for near real-time damage monitoring of composite structures. In: ASME international mechanical engineering congress and exposition, USA, 2007.

123.

Mal A, Ricci F, Gibson S, et al. Damage detection in structures from vibration and wave propagation data. In: Smart nondestructive evaluation and health monitoring of structural and biological systems II, vol. 5047, pp.202–210.

124.

Mal

Banerjee

Ricci

. An automated damage identification technique based on vibration and wave propagation data. Philos Trans R Soc 2014; 365: 475–491.

125.

Rucka

. Damage detection in beams using wavelet transform on higher vibration modes. J Theoret Appl Mech 2011; 49: 399–417.

126.

Grabowskaa

Palacz

Krawczuk

. Damage identification by wavelet analysis. Mech Syst Signal Process 2008; 22: 1623–1635.

127.

Katunin

. Detection and localization of delamination in composite beams using fractional B-spline wavelets with optimized parameters. Mainten Reliab 2014; 16: 391–399.

128.

Radzienski

Krawczuk

Palacz

. Improvement of damage detection methods based on experimental modal parameters. Mech Syst Signal Process 2011; 25: 2169–2190.

129.

Zanarini A. ESPI measurements in structural dynamics: fatigue life assessment. In: Dantec dynamics international conference and user meeting, Germany, 22–23 September 2008, pp.1–20.

130.

Odeshi

Adesola

Badmos

. Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading. Eng Fail Anal 2013; 35: 302–314.

131.

Farahani

Amaral

Belinha

et al.

A GTN failure analysis of an AA6061-T6 Bi-failure specimen. Procedia Struct Integr 2017; 5: 981–988.

132.

Boccardi S, Boffa ND, Carlomagno GM, et al. Infrared thermography to impact damaging of composite materials. In: Health monitoring of structural and biological systems, 2017.

133.

Meola C, Carlomagno GM, Ricci F, et al. Investigation of impact damage in composites with infrared thermography. In: 6th NDT in progress, Prague, 10–12 October 2011.

134.

Meola C, Boccardi S, Carlomagno GM, et al. Learning more on impact damaging of composites with infrared thermography. In: 1st international conference on impact loading of structures and materials, Torino, 2016.

135.

Belytschko

et al.

Element-free Galerkin methods for static and dynamic fracture. Int J Solids Struct 1995; 32: 2547–2570.

136.

Sinou J. A review of damage detection and health monitoring of mechanical systems from changes in the measurement of linear and non-linear vibrations. In: Mechanical vibrations: measurement, effects and control, 2009, pp.643–702.

137.

Zhao X. New methods for structural health monitoring and damage localization. PhD Thesis, University of Sheffield, UK, 2015.

138.

Zhou Y, Figueiredo E, Maia N, et al. Damage detection and quantification using transmissibility coherence analysis. Shock Vib 2015; 2018: 1–16.

139.

Li J. Analytical fatigue damage calculation for wind turbine support structure. MS Thesis, Western Reserve University, USA, 2011.

140.

Farahani

Tavares PJ, Moreira

et al.

Stress intensity factor calculation through thermoelastic stress analysis finite element and RPIM meshless method. Eng Fract Mech 2017; 183: 66–78.

141.

Awadallah

Morcos

. Application of AI tools in fault diagnosis of electrical machines and drives-an overview. IEEE Trans Energy Convers 2003; 18: 245–251.

142.

Gowd

Jayasree

Hegde

. Comparison of artificial neural networks and fuzzy logic approaches for crack detection in a beam like structure. Int J Artif Intell Appl 2018; 9: 35–51.

143.

Hakim SJS, Abdul Razak H and Ravanfar SA. Structural damage identification using Artificial Neural Networks (ANNs) and Adaptive Neuro Fuzzy Interface System (ANFIS). In: Proceedings of the 9th international conference on structural dynamics, Porto, Portugal, 30 June to 2 July 2014, pp.2537–2544.

144.

Ghiasi R, Ghasemi MR and Noori M. Comparison of seven artificial intelligence methods for damage detection of structures. In: The 15th international conference on civil, structural and environmental engineering, Scotland, 2015.

145.

Filippetti

Franceschini

Tassoni

et al.

Recent developments of induction motor drives fault diagnosis using AI techniques. IEEE Trans Ind Electron 2000; 47: 994–1004.

146.

Bellini

Filippetti

Tassoni

et al.

Advances in diagnostic techniques for induction machines. IEEE Trans Ind Electron 2008; 55: 4109–4126.

147.

Ghiasi

Ghasemi

Noori

. Comparative studies of metamodeling and AI-Based techniques in damage detection of structures. Adv Eng Softw 2018; 125: 101–112.

148.

Lin T. Damage detection and reliability assessment using analytically based artificial intelligence. PhD Thesis, Northwestern University, USA, 1996.

149.

Cheng

Zhang

et al.

Dynamic response analysis of an aircraft structure under thermal-acoustic loads. J Phys 2016; 744: 1–8.

150.

Makhlouf

Jones

. Effects of temperature and frequency on fatigue crack growth in 18% Cr ferritic stainless steel. Int J Fatigue 1993; 15: 163–171.

151.

Lin CH, Sheu JW and Lee DM. Local thermal effect on the growth rate of fatigue crack. In: International offshore and polar engineering conference, Brest, France, 1999, pp.195–200.

152.

Bachschmid N, Pennacchi P and Tanzi E. Analysis of the thermal effects in rotor shaft affected by transverse crack. In: Research activities on high performance computing clusters at CILEA, 2006, pp.11–25.

153.

Kulak RF and Hughes TH. Identification of factors that influence the stiffness of high-damping elastomer seismic isolation bearings. Reactor Engineering Division, Argonne National Laboratory, Argonne, IL, USA, 1994.

154.

Zolghadri N, Halling MW, Barr PJ, et al. Effects of temperature on bridge dynamic properties. Final Report, US Department of Transportation and Research, 2015.

155.

Zhang

et al.

Effect of thermal aging on the fatigue crack growth behavior of cast duplex stainless steels. Int J Miner Metall Mater 2015; 22: 1163–1170.

156.

Tsay

Young

Chou

et al.

The effect of residual thermal stresses on the fatigue crack growth of laser-annealed 304 stainless steels. Mater Chem Phys 2004; 88: 348–352.

157.

Price JWH, Chang M and Kerezsi B. Cracking of carbon steel components due to repeated thermal shock. In: SIF2004 Structural Integrity, Monash University, Australia, 2004.

158.

Syed

Zhang

Moffatt JE et al.

Effect of temperature and thermal cycling on fatigue crack growth in aluminum reinforced with GLARE bonded crack retarders. Int J Fatigue 2017; 98: 53–61.

159.

Khan

Sohail

et al.

Mechanical fatigue in aluminum at elevated temperature and remaining life prediction based on natural frequency evolution. Fatigue Fract Eng Mater Struct 2015; 38: 897–903.

160.

Khan

et al.

Fracture life estimation of Al-1050 thin beams using empirical data and a numerical approach. Insight - Non-Destr Test Condit Monitor 2018; 60: 363–368.

161.

Ma Y, Chen G and Yang F. Modal analysis of a simply supported steel beam with cracks under temperature load. Shock Vib 2017; 2017: 1–10.

162.

Chen

. Modal analysis of a rectangular variable cross-section beam with multiple cracks under different temperatures. J Vibroeng 2017; 18: 2717–3424.

163.

Mahi

Bedia

Tounsi

et al.

An analytical method for temperature-dependent free vibration analysis of functionally graded beams with general boundary conditions. Compos Struct 2010; 92: 1977–1887.

164.

Wang

Liu

Han

. Free vibration frequency variation analysis of a cracked aluminum alloy beam under high temperatures. J Harbin Eng Univ 2012; 33: 320–324.

165.

Gupta A, Jain NK and Salhotra R. Effect of thermal environment on vibration analysis of isotropic micro plate with inclined crack based on modified couple stress theory. In: 24th international congress on sound and vibration, London, UK, 23 July–27 July 2017.

166.

Joshi

Jain

Ramtekkar

et al.

Vibration and buckling analysis of partially cracked thin orthotropic rectangular plates in thermal environment. Thin-Walled Struct 2016; 109: 143–158.

167.

Zhao

Crossley

et al.

Analytical solutions for the coupled thermoelastic vibrations of the cracked Euler-Bernoulli beams by means of Green's functions. Int J Mech Sci 2017; 128: 37–53.

168.

Comisu

Taranu

Boaca

et al.

Structural health monitoring system of bridges. Procedia Eng 2017; 199: 2054–2059.

169.

Shul'zhenko

Zaitsev

Asaenok

et al.

Deformation and vibration-induced stress intensity of a high-temperature turbine rotor with a breathing transverse crack. Strength Mater 2017; 49: 751–759.

170.

O'Hara PJ and Hollkamp J. Modeling fatigue crack propagation in a Ti-alloy at elevated temperature within a reduced-order model framework. In: Structures, structural dynamics, and materials conference, San Diego, CA, USA, 2016.